Machine has been serviced good head good bearings good clutches. Tight table no backlash turn key machine. Comes with vice collets endmills and more.

HAAS VF 2SSYT CNC Vertical Machining Center Super Speed Extended Y-Axis VMC. Have two warehouses full of used equipment and tooling, and always getting new inventory.

2014 HAAS VF 3SSYT CNC Vertical Machining Center Super Speed Extended Y-Axis VMC. Have two warehouses full of used equipment and tooling, and always getting new inventory.

About of the item. Y-Axis power feed is made of aluminuml;Power Parameter: 95Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. AUTOMATIC AND MANUAL CONTROL? You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work. And this mulitfunctional milling machine power feed can work with excellent speed control in the entire range according to your needs. This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage. PORTABLE AND EASY TO INSTALL? This power feed for milling machine is compact and portable. Weight: 5kg/11lbs, Size: 74.511.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end, But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.

About of the item. Y-Axis power feed is made of aluminuml;Power Parameter: 95Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. AUTOMATIC AND MANUAL CONTROL? You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work. And this mulitfunctional milling machine power feed can work with excellent speed control in the entire range according to your needs. This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage. PORTABLE AND EASY TO INSTALL? This power feed for milling machine is compact and portable. Weight: 5kg/11lbs, Size: 74.511.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end, But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.

Power Feed Y-Axis for Milling Machine 450 in-lb Torque 5/8 Shaft 110V 200 RPM. X-axis power feed is made of aluminum; power parameters: 95 watts, 110V input voltage, 50/60Hz, single phase; rotation speed: 0-200 RPM. Maximum torque: 450in-lb; Maximum feed speed: 650mm/min; Maximum return speed: 850mm/min. This power feed is suitable for some milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. Portable and Easy to Install? This milling machine power supply is compact and portable, weighing only 3.75 kg/8.27 lbs and small in size. Install this power supply by yourself according to the instructions, even if you are a novice, you can operate it skillfully. You can set this power feed to automatically work at a constant speed, freeing your hands and improving efficiency, or you can manually adjust the speed control knob to get more precise milling work, the dual control mode can provide excellent throughout the range Speed control to meet your different needs. Equipped with Gleason spiral bevel gear, the transmission ratio is stable during use, the transmission noise is small, the efficiency is high, and the load-bearing capacity is strong. Special safety devices protect the transmission plastic gears and electronic components from damage. We accept Payoneer only. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. We cannot deliver your order if your state is PR. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem.

2017 HAAS VF-2YT Vertical CNC Millin g Machine. With HRT-210 4th Axis Rotary. X Axis 30 762 mm. Y Axis 20 508 mm. Z Axis 20 508 mm. 20 Position Side Mount ATC. Drive System Inline Direct Drive. We will not palletize, skid or crate an item over 1000 lbs.

Sharp Mill with DRO With X and Y-Axis Power feeds. Excellent condition, used in a one-man shop. Shiping can be arranged. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mckbin” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 3 hp
• Machine Type: Milling Machine
• Power Source: Electric
• Table Length: 49
• Spindle Taper: R8
• Z-Axis Travel Bed: 5 in
• Brand: Sharp
• Function: Milling
• X-Axis Travel Bed: 32
• Control: Manual
• Max Spindle Speed (RPM): 4001 – 4500
• Voltage: 230 V
• Model: Sharp
• Y-Axis Travel Bed: 16
• Country/Region of Manufacture: Taiwan

Milling machine accessory – ALIGN Power Feed for Y-Axis AL-400SY fits Bridgeport. Made in Taiwan Power Table Feed for Bridgeport-style milling machines (For Y-axis) Model #: AL-400SY Used for the Y-axis Variable speed control Rapid traverse button Automatic shut-off at end of cut On-off switch Travel stop/ limit switch assembly Complete installation hardware included Torque, Average: 150 in-lb Torque, Peak: 550 in-lb Speed range: 0 200 rpm, 200 rpm max Power source: 110VAC 50/60Hz Single-phase. If You have any questions regarding this item, please let us know we’ll be happy to help. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in this country: US. This item can be shipped worldwide.

• Brand: ALIGN
• MPN: AL-400SY
• Model: AL-400SY
• Country/Region of Manufacture: Taiwan

Up for sale is a. Revo 540 Milling Machine , Y-Axis. Great for the custom jewelry maker! The computer and other parts of the machine powers on. It’s in overall good shape. The control panel has wear. It has an plastic cover that has started to chip/peel, this is only cosmetic and doesn’t change the function of the machine. You can see this in photos #3 and #4. This machine comes with an installed software program Revo 540 Gemvision version 2.4.9. No software disc or USB key fob included. The monitor, mouse, and keyboard are defective so they will need to be replaced. This is a great item and can really put your jewelry shop on the map by being able to create custom items. If you have any questions, please feel free to ask. You may receive recycled packaging. This helps keep our prices low and helps the environment. Trust me, I’m not an expert on a darn thing, really. I simply list what I have. Please contact me ASAP with any concerns. Please see the photos for the condition of the item, and if you need more photos to determine the condition just send me a message and I will get back to you. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “infinitej0y” and is located in this country: US. This item can be shipped to United States.

• Model: 540
• Machine Type: Milling Machine
• Power Source: Electric
• Function: Milling
• Brand: revo