Top Bearing Ultra-Performance Compression Flush Trim Router Bit 2″ Cutting Length X 7/8″ Cutting Diameter – 1/2 Shank – Yonico 33223. Ultra-Performance 2″ Cutting Length X 7/8″ Diameter. This Top Bearing Ultra-Perfomance Compression Flush Trim Router Bit has a 2″ cutting height and a 7/8″ diameter with an overall length of 4-3/4″ and a 1/2″ shank. The Yonico Ultra-Performance trim bits feature a solid carbide sleeve welded to a hardened steel core. This results in a bit that performs like a solid carbide bit which is considerably less expensive. Upgrain routing is where this bit shines and with it’s complex up-down or compression geometry this bit produces a finish that is unmatched by standard flush trim bits. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tool & Air Tool Accessories\Router Bits”. The seller is “yonico” and is located in this country: US. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 33223
• UPC: 603915019336
• Manufacturer: Yonico
• Type: Ultra-Performance Compression Flush Trim Router Bit
• Item Diameter: 7/8\
• Cutting Length: 2\
• Number of Flutes: 2
• Item Width: 7/8\
• Material: Carbide
• Item Length: 4-3/4\
• Shank Size: 1/2\

1/8″ Diameter 2 Flute Upcut CNC Endmill (10 Pack)1/4″ Shank Yonico 35210-SC-10PK. Best for achieving smooth finish on hard plastics. Cutting Diameter: 1/8″. Cutting Height: 1/2″. Shank Diameter: 1/4″. Overall Length: 2″. Flutes: 2 Low Helix bits perform a more lateral movement with less lift resulting in a smoother finish. To get a smooth finish in hard plastics like acrylic with your CNC router, use a low helix spiral end mill. The modified cutter angle produces a better finish in plastics than standard spiral bits. Downcut bits pull chips downward, producing a clean top edge in your parts. Consequently, the chips accumulate in the cut path and should be removed to prevent bit breakage. Low helix bits require slower feed speeds than normal “high helix” bits. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies”. The seller is “yonico” and is located in this country: US. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 35210-SC-10PK
• UPC: 603915006190
• Manufacturer: Yonico
• Type: 2 Flute Low Helix Upcut Spiral End Mill CNC Router Bit
• Item Diameter: 1/8\
• Cutting Length: 1/2\
• Flute Angle: 7°
• Number of Flutes: 2
• Material: Solid Carbide
• Item Length: 2\
• Shank Size: 1/4\

3/8″ Diameter Upcut Spiral Endmill (5 Pack) – 3/8″ Shank – Yonico 31017-SC-5PK. This O-flute bit has a cutting diameter of 3/8″, cutting height of 1-1/8″, overall length 3″ and 3/8″ shank. This bit is specifically designed for milling aluminum. O flute end mills allow for lots of chip clearance which is essential when milling aluminum. Aluminum creates larger chips than most other materials and bits such as O-flute end mills are recommended for proper chip removal. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies”. The seller is “yonico” and is located in this country: US. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 31017-SC-5PK
• UPC: 603915002116
• Manufacturer: Yonico
• Type: O Flute Upcut Spiral End Mill CNC Router Bit
• Item Diameter: 3/8\
• Cutting Length: 1-1/8\
• Number of Flutes: 1
• Item Width: 3/8\
• Material: Solid Carbide
• Item Length: 3\
• Shank Size: 3/8\

3/16″ Diameter Ball Nose CNC Endmill (10 Pack) 1/4″ Shank Yonico 34212-SC-10PK. This 2 flute round nose endmill has a cutting diameter of 3/16″ and a cutting length of 3/4″. The shank is 1/4″ in diameter and the overall length is 2″. Ball nose spiral end mills are used for smooth contouring and fine detail passes with a CNC router and often for complex shapes like 3D carvings. The rounded tips reduce tool markings, which produce smooth curves that would be impossible to achieve with flat end bits. Small diameter ball nose end mills are used for projects with intricate detail while larger bits are used for smoother projects with more gradual slopes. These bits are also excellent for routing fluted columns and channels in cutting boards and countertops edges. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies”. The seller is “yonico” and is located in this country: US. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 34212-SC-10PK
• UPC: 603915005773
• Manufacturer: Yonico
• Type: 2 Flute Ball Nose Spiral End Mill CNC Router Bit
• Item Diameter: 3/16\
• Cutting Length: 3/4\
• Flute Angle: 35°
• Number of Flutes: 2
• Material: Solid Carbide
• Item Length: 2\
• Shank Size: 1/4\

Top Bearing Ultra-Performance Compression Flush Trim Router Bit – 1/2 Shank – Yonico 33203. This Top Bearing Ultra-Perfomance Compression Flush Trim Router Bit has a 1-1/8″ cutting height and a 7/8″ diameter with an overall length of 4-1/16″ and a 1/2″ shank. The Yonico Ultra-Performance trim bits feature a solid carbide sleeve welded to a hardened steel core. This results in a bit that performs like a solid carbide bit which is considerably less expensive. Upgrain routing is where this bit shines and with it’s complex up-down or compression geometry this bit produces a finish that is unmatched by standard flush trim bits. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tool & Air Tool Accessories\Router Bits”. The seller is “yonico” and is located in this country: US. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 33203
• UPC: 765573831900
• Manufacturer: Yonico
• Shank Size: 1/2\
• Number of Pieces: 1
• Model: 33203
• Type: Ultra-Performance Compression Flush Trim Router Bi
• Cutting Length: 1-1/8\
• Largest Diameter: 7/8\
• Number of Flutes: 3
• Item Width: 7/8\
• Material: Carbide
• Item Length: 3-9/16

1/4″ Tapered Ballnose Spiral ZRN Coated CNC Router Bit (10 Pack) – 1/4″ Shank – Yonico 37415-SC-10PK. This 0.1 degree tapered end mill has a 1/4″ diameter cutting tip and a 1″ cutting length. The 4 flutes and the ZRN coating provide great performance and extended tool life. Tapered CNC end mills with ZRN coating provide the extra length needed to carve 3D shapes out of solid wood, plastic, foam and other materials. The tapered design provides added strength to the bit while still maintaining a small radius at the bit’s tip. This unique design provides clearance when routing 3D profiles and allows you to create complex carvings in all kinds of stock. With the added ZRN coating, the bit’s lifespan and durability are increased substantially avoiding unnecessary down time. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies”. The seller is “yonico” and is located in this country: US. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 37415-SC-10PK
• UPC: 603915007579
• Manufacturer: Yonico
• Type: Tapered Ballnose Spiral ZRN Coated CNC Router Bit
• Item Diameter: 1/4\
• Cutting Length: 1\
• Number of Flutes: 4
• Material: Solid Carbide
• Item Length: 3\
• Shank Size: 1/4\

2 Flute Downcut Spiral End Mill CNC Router Bit (10 Pack) – 1/4 Shank – Yonico 32216-SC-10PK. Best used for: Laminate or veneer-finish plunging and dadoing. Cutting Diameter: 1/4″. Cutting Height: 1″. Shank Diameter: 1/4″. Overall Length: 2-1/2″. Flutes: 2 Down cut endmills shear in a downward direction causing the uppermost layer of the material to be pressed down against the material just below it. This motion leaves a perfectly clean top surface edge. A concentration of wood chips in the work path will occur. Hose away excess wood chips to prevent bit breakage. Down cut CNC end mills are great for dado, pocket and inlay work as well as the final pass on most projects. These bits are especially useful when routing material such as melamine and plywood. Down cut spiral bits are designed to produce perfectly clean edges on the top face of the work piece but since the bit’s geometry causes the wood chips to travel in a downward direction, which will cause the tool path to be obstructed, it should only be used in applications where the desired finish is required. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies”. The seller is “yonico” and is located in this country: US. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 32216-SC-10PK
• UPC: 603915004219
• Manufacturer: Yonico
• Type: 2 Flute Downcut Spiral End Mill CNC Router Bit
• Item Diameter: 1/4\
• Cutting Length: 1\
• Number of Flutes: 2
• Material: Solid Carbide
• Item Length: 2-1/2\
• Shank Size: 1/4\

Counter Sink & Screw Slot Router Bit – 1/2 Shank – Yonico 14199. Cut counter sink screw slots up to 1 deep for common #10 & #12 wood screws. A countersink is used when the fasteners head is conical in shape as in the case of a typical wood screw where the screw head needs to be flush or sit below the surface of the work piece. Alternatively, a counterbore hole is typically used when the fasteners head, such as a round head screw, is required to sit flush with or below the level of a workpiece’s surface. Our bits are constructed with a single solid carbide tip with virtually no center web resulting in a very high-quality tool. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. The item “Counter Sink & Screw Slot Router Bit 1/2 Shank Yonico 14199″ is in sale since Thursday, December 7, 2017. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tool & Air Tool Accessories\Router Bits”. The seller is “yonico” and is located in Lakewood, New Jersey. This item can be shipped worldwide.

• Model: 14199
• Item Width: 7/16″
• Type: Counter Sink & Screw Slot Router Bit
• MPN: 14199
• Item Length: 2-9/16″
• UPC: 765573832877
• Manufacturer: Yonico
• Shank Size: 1/2″
• Number of Items in Set: 1
• Number of Pieces: 1
• Cutting Diameter: 7/16″
• Cutting Length: 1″
• Largest Diameter: 7/16″
• Number of Flutes: 2
• Brand: Yonico
• Item Diameter: 7/16″

Top & Bottom Bearing Ultra-Perfomance Flush Trim Router Bit – 1/2 Shank – Yonico 33202. This Top & Bottom Bearing Ultra-Perfomance Compression Flush Trim Router Bit has a 1-1/8″ cutting height and a 7/8″ diameter with an overall length of 4-1/16″ and a 1/2″ shank. The Yonico Ultra-Performance trim bits feature a solid carbide sleeve welded to a hardened steel core. This results in a bit that performs like a solid carbide bit which is considerably less expensive. Upgrain routing is where this bit shines and with it’s complex up-down or compression geometry this bit produces a finish that is unmatched by standard flush trim bits. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. The item “Top & Bottom Bearing Ultra Flush Trim Router Bit 1/2 Shank Yonico 33202″ is in sale since Wednesday, May 15, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tool & Air Tool Accessories\Router Bits”. The seller is “yonico” and is located in Lakewood, New Jersey. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 33202
• UPC: 765573831702
• Manufacturer: Yonico
• Shank Size: 1/2″
• Number of Pieces: 1
• Model: 33202
• Type: Ultra-Performance Compression Flush Trim Router Bi
• Cutting Length: 1-1/8″
• Largest Diameter: 7/8″
• Number of Flutes: 3
• Item Width: 7/8″
• Material: Carbide
• Item Length: 4-1/16″

Flooring 2 Bit Tongue and Groove Router Bit Set – 1/2 Shank – Yonico 15229. This mini v-groove tongue and groove set is great for 5/8″ stock and can also be used as a standard tongue and groove for stock as small as 3/8″. The tongue and groove section measures 1/4″ deep x 3/16″ high. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only. That means that your order will be at your door in no time. Our 30,000+ reviews give you the assurance that our quality and service is right at the top. The item “Flooring 2 Bit Tongue and Groove Router Bit Set 1/2 Shank Yonico 15229″ is in sale since Thursday, April 27, 2017. This item is in the category “Home & Garden\Tools\Power Tools\Router Bits”. The seller is “yonico” and is located in Lakewood, New Jersey. This item can be shipped worldwide.

• Brand: Yonico
• MPN: 15229
• Cutting Length: 3/4″
• Number of Flutes: 2
• Material: Carbide Tipped
• Shank Size: 1/2″