Brand New X&Y ACME Screws installed May 2016. Table size: 9″ x 42″. Items available for additional cost: Collets Rack, R8 collets 1/8″ to 3/4″, drill chuck, digital readout, powerfeeds, lock down vise. Moriseiki, Mori Seiki, leblond, webb, enco, clausing, monarch, morton, bridgeport, alliant, hurco, cnc, dro, digital read out, tooling, jet, southbend, south bend, toolroom, american hole, carlton, fosdick, cincinnati. BEFORE PURCHASING, PLEASE READ ALL TERMS. Item is subject to prior sale. Your truck: MTR will load items, as is on your truck free of charge. Items left beyond Thirty (30) days will be considered abandoned and the customer forfeits the rights to the item or items. MTR is not liable for any damages caused by carriers. Payments must be received within 7 days, 1 calendar week, of end of listing. Machine Tools Rebuilt (MTR). Sells all products as is unless otherwise noted in listing. MTR shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental or consequential damages. Prices are subject to change. The item “Bridgeport 9 x 42 Variable Speed Milling Machine” is in sale since Thursday, May 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jcm122286″ and is located in Carlyle, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: 2J
• Model: 2J

Year 1998 Yang SMV-1000 CNC Vertical Machining Center with Fanuc OMD Control. Table Dimension X-Y 42″ x 20″. Travel X Axis 40. Travel Y Axis 20. Travel Z Axis 20. Rapid rate X, Y & Z Axis 1180 Ipm. Distance from Spindle nose to table surface 3.9″ – 24″. Distance from Spindle center to. ATC Carousel Type Changer 20 Tool. Max Tool Weight 13 lbs. Machine Weight 10,000 lbs. The item “1998 YANG SMV-1000 VERTICAL MACHINING CENTER WITH FANUC OMD CONTROL” is in sale since Sunday, May 01, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “avtechmachine” and is located in Chino, California. This item can be shipped to United States.

• Brand: Yang
• MPN: SMV-1000
• Model: SMV-1000

This is a used Intelitek Light machines proLight 2000 CNC benchtop mill. Serial 016 19AA 0143. Made in the late 1990′s I believe. As you probably know, this was one of the heaviest, most robust benchtop CNC mills made. Its not a toy like the newer offerings built on a Sherline platform. The machine has a 19.5″ x 6.25″ table in beautiful condition (minor staining) with 12″ x 6.75″ x 9 travels. The motor is a brushless DC Baldor 1HP and spindle speed is up to 5000 rpm. It uses DC servo motors with 1000 line closed loop differential encoders with a maximum feed rate of 150ipm. One of the best things about this machine is that it uses standard R8 tooling, just like a Bridgeport, so collets, endmill holders and many other accessories are readily available. With the exception of very minor scratches and scuffs, the machine and all its hardware components are in excellent condition. The machine was obviously used very little, and the little bit of chips I found were all plastic and aluminum. I don’t think this machine was ever subject to cutting steel, although it is one of the few benchtop mills that are capable of it without working the machine too hard. ============== I acquired this machine several years ago with the intention to update it to modern drives, controls and software. To that end, I carefully gutted (and tagged) the old electronics (included), and researched the servo drives and encoders (documentation included). I got a new Hoffman 20x16x8 enclosure which is intended to replace the cramped original box, and a Boston gear Ratiotrol DC drive for the spindle motor. I installed an aluminum plate in to the Hoffman box for mounting new components and for heat sinking. That’s as far as I got. Unfortunately, I’ve got too many other projects, so I’m not going to be able to complete this one. Obviously the machine doesn’t work right now. This is a blank slate for which you can choose your own power supply, drives (ex-Gecko), controls and software (ex-Mach3). There are now many more options available, and prices for all the necessary components are now much more reasonable than they were just a couple years ago. The machine comes with everything in the pictures, and nothing else. ============== If you are willing to put in the work and supply the new electronics, you will end up with beautiful, capable and valuable benchtop CNC mill with a modern control system. T E R M S. Please check my feedback. (1) Be as accurate as possible in my descripion of an item. I will generally tell you my (subjective) opinion of condition and try not to exaggerate. Please study the pictures as my opinion may not be yours. (2) Tell you the good the bad and the ugly. I may not be completely familiar with an item, and may not find or be aware of all issues. However, I will not knowingly hide any important issue, deficiency or problem. (4) Be communicative and available before, during and after the deal. (1) Understand that this is used equipment. (7) Follow up upon receipt of the tool/machine and inform me that it has arrived. (8) Despite best efforts, occasionally an unforseen issue arises. If there is any issue, allow me the opportunity to work with you to provide a satisfactory resolution. A little communication goes a long way.. Weight is about 410 lb. FOB Albuquerque, New Mexico, 87107 I can and will arrange trucking logistics/paperwork, etc. To you anywhere in the Continental US. East coast and northwest locations are most expensive. We have been getting very good rate quotes from YRC. They load for you. I’ll need your name, city and zip code. ====================== You are invited to pick it up here, or to use your own truckers. NOTE—Several fellows have asked me if this machine could be put back together easily with the old parts. It MUST be updated with new electronics. I don’t remember if ALL the parts are there-most are including the animatics drivers in the silver box. I recall that the spindle motor control seemed to be non functional and I think I threw it out. This IS NOT a one or two day project. The item “Light Machines Intelitek proLight 2000 CNC Benchtop Mill Machining Center” is in sale since Friday, April 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rtcg” and is located in Rio Rancho, New Mexico. This item can be shipped to United States.

Good used J head machine everything works, no power feed, no DRO, no tooling, except the vise is included. Its a decent older machine, 208/220/230 3 phase power. The item “Bridgeport Milling Machine J head step pulley style no reserve” is in sale since Tuesday, May 03, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “aandhusacom” and is located in Johnston, Rhode Island. This item can’t be shipped, the buyer must pick up the item.

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE. This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 325 LBS (With Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIP! BRUSHLESS MOTOR” is in sale since Monday, April 25, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Model: PM-25MV

SERVO POWER FEED UNIT FOR VERTICAL MILLING MACHINE BRIDGEPORT MODEL 90. N GOOD WORKING CONDITION. REMOVED FROM A BRIDGEPORT THAT WAS OUTFITTED WITH TRAK CNC CONTROLS. Thanks for looking and have a great day! The item “SERVO POWER FEED UNIT FOR VERTICAL MILLING MACHINE BRIDGEPORT MODEL 90″ is in sale since Tuesday, May 03, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mattesglobalmachinerytrading” and is located in San Diego, California. This item can be shipped to United States.

Roto Trak mx3 on a acer mill. In good condition everything works as it should. Shows some signs of wear all normal for this year I believe it is a 2000 model computer. New bearings in spindle and Newer motor. I have owned this machine for the past 12 years and have done all maintenance on machine. Still being used can see run. Located in Dayton Ohio. The item “Proto Trak Mx3″ is in sale since Thursday, May 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “harleyboyharleytoy” and is located in Dayton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Acer
• Model: Acer Proto Trak Mx3

2001 Fadal VMC 5020A High Torque Vertical CNC Mill. Fadal Vertical Machining Centers are designed and built to give you the maximum in useful performance. Every element meets the highest standards of quality, productivity and reliability. Virtually every component in the Fadal VMC is American made, to strict quality standards. The VMC 5020A offers excellent performance for jobs up to 50″ x 20″ in size and occupies a floor space of 116 inches wide by 87 inches deep. The 5020A is equipped with a 22.5 hp motor that generates 160 ft-lb of torque at the spindle. Please call for more information on making this Fadal VMC 5020AHT machine, yours! Fadal Multi-Processor CNC Control. Side Mount 24 Station Turret. 220 ft-lbs High Torque Spindle (Standard 160 ft/lbs). Built In Work Light. Full Enclosure Splash Guards. Process Completion Flashing Lamp. Automatic Way Lubrication System. Floor to Table Surface. 5 x 0.687″ x 3.75″. Cutting Feed Rate (X/Y/Z). Rapid Feed Rate (X/Y/Z). 900(X/Y) 700(Z) ipm. Maximum Weight on Table. Axis Drive Motor (X/Y/Z). Spindle Nose to Table. Spindle Center to Column. 22.5 HP, 11kW. Machine Floor Space Dimensions. 80 – 120 psi, 15 scfm. 45 Amps, 230/440 VAC, 3-Phase. Specifications subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 120″ x 90″ x 114H. MACHINE WEIGHT: 11,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. Jason Adler is our dedicated Finance Manager. Speak to him directly to find the program that best fits your business. The item “2001 FADAL VMC 5020 HIGH TORQUE CNC VERTICAL MILL Rare Size 22.5HP, 24ATC” is in sale since Tuesday, May 13, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Fadal
• Country/Region of Manufacture: United States
• Model: VMC 5020AHT
• Country of Manufacture: United States
• Serial No.: 012001072661
• Year: 2001

All Patterns for supercharged blower cases and others. Great condition, has only cut aluminum. The item “Brown & Sharp 3 Axis mill with 4th axis attachment” is in sale since Wednesday, May 04, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bilblomgre-0″ and is located in Santa Clarita, California. This item can be shipped to United States.

BRIDGEPORT SERIES II VERTICAL MILL. Table Area (T-Slotted): 58″ L-R x 11″ F-B. Table Travel: 30 – Longitudinal. 16 – Vertical (Knee). Vertical Capacity: 6.75″ to 18.75″. Throat: 10-5/8 – Minimum. Variable Speed Head: 50 – 3500 RPM (2 Speed Ranges). 4 HP Model Variable Speed Head. Power Quill Up and Down Feed. Micrometer Quill Depth Stop. 2-Axis Digital Read Out. Electrical Push Button Controls. Approximate Dimensions: 70″ L-R x 86″ F-B x 84 H. Approximate Weight: 5000 Lbs. As a Bonus a Prototrak systom will be included in sale as seen in picture. The item “Bridgeport Series II Mill” is in sale since Monday, April 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ocd_man” and is located in Pittsboro, Indiana. This item can’t be shipped, the buyer must pick up the item.