SEE DRY RUN VIDEO OF THIS MACHINE RUNNING A SHORT PROGRAM AT. Specifications are as Follows. 1996 Haas VF-3, Vertical Machining Center (VMC). X Axis Travel: 40″ Y Axis Travel: 20″ Z Axis Travel: 25 Rapid Rate X Axis: 1,000 IPM Rapid Rate Y Axis: 1,000 IPM Rapid Rate Z Axis: 1,000 IPM Table Size: 48 x 18 Max Table Load: 3,500 LBS Spindle Motor: 15 HP Spindle Speed: 8,100 RPM Spindle Taper: CT40 CT Tool Changer: 20 ATC Dimensions: 118 x 74 x 120 Weight: 12,500 LBS. EQUIPPED WITH: HAAS CONTROL. WIRED FOR 4TH AXIS. 15 HP HIGH TORQUE SPINDLE MOTOR. New Spindle from Haas was Installed in 2018. We will load, free of charge. First of all, our descriptions are as accurate as we can possibly make them, and we’ve been describing equipment for longer than we care to admit. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse 515 Kercher St. Best Ways Brokerage Inc. This CNC Milling Machine will weigh approximately 12,500# and occupy 10′ of bed space. The item “1996 HAAS MODEL VF-3, VERTICAL MACHINING CENTER, VMC, With NEW SPINDLE IN 2018″ is in sale since Thursday, June 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “u$ave2″ and is located in Miamisburg, Ohio. This item can be shipped to United States.

• Model: VF-3
• Spindle Horsepower: 15 HP
• Machine Type: Machining Center
• Table Length: 48″
• Max Spindle Speed (RPM): 8100 RPM
• Model Year: 1996
• Power Source: Electric
• Catagory: CNC VMC
• X-Axis Travel Bed: 40″
• Y-Axis Travel Bed: 20″
• Z-Axis Travel Bed: 25″
• Spindle Taper: CAT 40
• Function: Milling
• Brand: Haas
• Table Width: 18″
• Control: CNC
• Voltage: 220 V

Bridgeport cnc milling machine. Note: NEW MONITOR NEEDED everything else in working conditions AS IS. The item “Bridgeport cnc milling machine” is in sale since Wednesday, April 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fosterscnc” and is located in Riverside, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Paraguay, Reunion, Uruguay, Taiwan.

• Brand: Bridgeport
• Machine Type: Milling Machine
• Control: CNC

FADAL VMC4020 VERTICAL MACHINING CENTER. Lake Bluff, Illinois United States. 43.5″ x 20″. Distance from Spindle Nose to Table. Fadal CNC88 CPU Control. USB Port On Pendant. Umbrella Tool Changer Servo Turret. Coolant Pump And Tank. This machine is being offered thoroughly checked out in our shop, cleaned and cycled. It is being offered with a 30-Day Return Privilege and may be inspected under power here in our plant. The Fadal is a very good runner and has exceptional appearance for its age. It can be inspected under power on our floor. We will load on a flat bed truck at no additional charge. The item “FADAL VMC4020 VERTICAL MACHINING CENTER” is in sale since Thursday, March 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “adamsmachinerycompany” and is located in Lake Bluff, Illinois. This item can be shipped to United States.

G0704 7″ x 27″ 1 HP Mill/Drill with Stand. G0704 7″ x 27″ 1 HP Mill Drill with Stand. America’s most popular Mill Drill. The G0704 7″ x 27″ 1 HP Mill Drill with Stand can be easily operated by those just learning to mill and is also great as a dedicated, single-purpose machine in a professional shop. It is an excellent value and has some of the same features found on much larger mill drills. Spindle RPM can be monitored on the convenient digital readout. A clear chip guard on the spindle keeps debris from flying at the operator. The G0704 has a large 7-1/16″ x 26-5/8″ table that can be moved by handwheels in both the longitudinal and cross directions. Both feed directions can be locked by table lock levers. The G0704 also features tapered gibs with double locks which adds accuracy and rigidity, a dovetail column; and it comes with its own stand. The G0704 manual was written by our U. Based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your mill drill. Made in an ISO 9001 factory. Motor: 1 HP, 110V, single-phase, 12A. Distance spindle to table: 13. Table travel (longitudinal): 18-7/8. Table travel (cross): 6-7/8. Vertical head travel: 11. Head tilt: 90° L/R. Table size: 7-1/16″ x 26-5/8″. Stand footprint: 15-3/4″ x 16-1/2″. Fine feed head control. Clear guard on spindle. Rubber chip guards on ways. We are committed to your satisfaction. What Are My Options? Since our inception in 1983, Grizzly Industrial®, Inc. Has grown into one of the largest machinery companies in the United States. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network, and resulting in lower prices to you. We ARE Grizzly Industrial, Inc. We reserve the right to correct errors and omissions in our listings, including specifications, photographs, and pricing. Thank you for your interest. The item “Grizzly G0704 7 x 27 1 HP Mill/Drill with Stand” is in sale since Tuesday, June 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “grizauctions” and is located in Bellingham, Washington. This item can be shipped to United States.

• Brand: Grizzly
• UPC: 690550106965
• California Prop 65 Warning: Warning. Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.
• Country/Region of Manufacture: China
• Model: G0704
• MPN: G0704

Welcome to Select Machine Tool. Bridgeport J-Head Step Pulley Vertical Milling Machine With Newall 2 Axis Dro. Specifications: Table Size – 9″ x 42″ Longitudinal Table Travel – 30″ Cross Travel of Table – 9″ Vertical Travel of Knee – 16″ Vertical Capacity – 0 to 18-1/2″ Throat, Min / Max – 6-3/4″ / 18-3/4″ Spindle Taper – R8 Spindle Feeds (3). 006 / Rev Spindle Speeds (8) – 80 to 2720 RPM Spindle Motor 1 HP , presently wired 3/60/220v Weight, Approx – 2000 Lbs. Newall Sapphire 2 Axis Dro. Mitutoyo Digital Quill Scale. Servo 140 Knee Power Feed. Collet Tool Holder Rack With (13) R8 Collet Tool Holders. Original Bridgeport X-Axis Power Feed System. THE ABOVE SPECIFICATIONS ARE DEEMED ACCURATE BUT ARE SUBJECT TO VERIFICATION. We want you to be happy and we also want to help you in any way possible. We want to build relationships with our customers and the best way to do that is by providing quality products, honest representations, value, and service. Again, we want to thank you for your time and interest and we look forward to earning your business in the near future. In order for this to be an enjoyable experience, please ask all questions before purchasing. Thank You for stopping by and please view our other items. FOR ALL OF YOUR AIR, TOOLING, AND MACHINING NEEDS PLEASE VISIT. The item “Bridgeport J-Head Step Pulley Vertical Milling Machine With Newall 2 Axis Dro” is in sale since Friday, July 10, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “selectmachine” and is located in Roanoke, Virginia. This item can be shipped to United States.

• Machine Type: Vertical Milling Machine
• Spindle Taper: r8
• Function: Drilling
• Brand: Bridgeport
• Control: Manual
• Voltage: 220v

BRIDGEPORT VARI SPEED MILLING MACHINE WITH IMPECCABLE CHROME WAYS /. POWER FEED / RISER / VICE / 1.5 HP MOTOR / 9″ X 42″ TABLE. THE HEAD IS NICE AND QUIET (FOR A V/S) ASK FOR JIM FOR MORE INFO 7146121480. The item “BRIDGEPORT VARI SPEED MILLING MACHINE WITH IMPECCABLE CHROME WAYS / POWER FEED” is in sale since Thursday, February 13, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tnt_industrial” and is located in orange, California. This item can be shipped to United States.

• Spindle Horsepower: 2 hp
• Machine Type: Milling Machine
• Brand: Bridgeport

4 X 1″ SPRING OIL CUPS 1/8″ BSP STRAIGHT FITTING. CUP 1/8″ BSP STRAIGHT FITTING 1″ DIAMETER ALL HAVE SPRING LOADED FLIP TOPS CHROME PLATED. The item “RDGTOOLS 4X 1 SPRING OIL CUPS STRAIGHT FITTING 1/8 BSP FITTING MILLING LATHE” is in sale since Thursday, February 1, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

DOUBLE SWIVEL VERTICAL SLIDE. THIS MILLING SLIDE REVOLVES BOTH ON THE BASE AND THE TABLE. GRADUATED IMPERIAL 10TPI THREAD. TABLE SIZE IS 100MM X 125MM WITH 3 TEE SLOTS. SQUARE THREAD AND BRONZE NUT. VERTICAL SLIDE CAN BE FIT ONTO OTHER SIMILAR SIZED MACHINES. 2 T NUTS ON BASE SUPPLIED FOR CLAMPING. The item “RDG VERTICAL SLIDE DOUBLE SWIVEL FOR MYFORD LATHE SUPER 7 ML7 IMPERIAL” is in sale since Tuesday, October 29, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford