Pm-30mv Bench Top Vertical Milling Machine With 3 Ax Dro And Stand! Free Ship

INCLUDES 3 AXIS DRO INSTALLED AND STAND with Leveling Feet. This machine uses 220V Standard Power! Highlights Of This Machine that set it apart from others on the market. MUCH Larger Travels and work area. Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling – Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper. Mounting surface for much more rigidity over other models in this size range. Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it. Easier to cut accurately – One line on the dial is. One full turn of the handwheel is. Much easier to use than those with odd metric conversions. 50-3000 RPM variable speed with the turn of a knob, properly set up with Low and High for a wider speed range, and plenty of power at lower speeds. Precision ground ways for smoother movements – Not just rough milled. Thrust Bearings in leadscrew ends – not bushings – Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any. Failure prone plastic gears (And the hassle of changing them when stripped). Variable Speed with Belt Drive and Brushless DC Motor. 3 Axis DRO Installed. Stand with Leveling Feet. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. PM30MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4? Face Milling Capacity 3-1/2? Cross Travel (Y Axis) 8-3/4? Longitudinal Travel (X Axis) 23? Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 14? Max Distance Spindle to Table 17? Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 14mm, our 9/16? Kit listed is sized for this machine. Range of Spindle Speeds 50-3000 rpm, 2 Ranges (Properly set up with high and low range belt positions for more power at lower speeds as it should be). Headstock Tilt Left & Right ±90°. Net Weight (Not Including Base) 530 LBS. Net Weight (With Base) 605 LBS (630 LBS with base w/leveling feet). Country or Origin: China. Power Required 220V, Single Phase, 10 Amp. Cord Connection/Type: Cord approx. 5′ length, User to supply plug needed for your outlet 20A 240V With Ground, No Neutral Required. Optional Stand Height: 28? Base w/leveling feet 32? Bolt Pattern, Machine Base Mounting Holes: APPROX. 13-1/8″W x 15″ Front to back, with 1/2? (we recommend waiting until your machine arrives before drilling any mounting holes in case this varies) Table Surface Height (On Stand): 36? With base w/leveling feet 40? Height, Head at normal working height (W/O Stand): 39″ Max Height, Head at top of travel (W/O stand): 48″ Height, Head at normal working height (On Stand): 67 on base w/leveling feet 71? Max Height, Head at top of travel (On stand): 76 on base w/leveling feet 80? Width, Tip to Tip of table handles: 46-1/4″ Dimension Front To Back, from back of chip pan, to front table handle tip: 31″ (Can be pushed back against a wall, and table handle tip will be 31 from wall). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in this country: US. This item can be shipped to United States.

• Country//Region of Manufacture: china
• Spindle Horsepower: 2 hp
• Brand: Precision Matthews
• Function: Milling, Drilling
• Control: Manual
• Machine Type: Vertical Milling Machine
• Custom Bundle: No
• Voltage: 220 V
• MPN: PM-30MV-w/dro
• Spindle Taper: R8
• Modified Item: No