INCLUDES 3 AXIS DRO INSTALLED AND STAND with Leveling Feet. This machine uses 110 /120V Standard Power! Highlights Of This Machine that set it apart from others on the market. Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard. Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Spindle To Table Max Distance for taller work. Y Axis Travel, More than other machines in this class. 3 Axis DRO Installed. Stand with Leveling Feet. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1? Face Milling Capacity: 3? Cross Travel (Y Axis): 8-1/2? Longitudinal Travel (X Axis): 15? Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16? Max Distance Spindle to Table: 18-1/4? Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3? T Slot Size: 1/2? T Slots are slightly less than 1/2? Actual size 12mm, our 1/2? Is sized for this machine. Head Tilt: Left & Right ±90°. Net Weight (Not Including Base): 475 LBS. Net Weight (With Optional Base): 575 LBS. Country or Origin: China. Power Required: 110/120V, Minimum 15 Amp Circuit, Approx. 5′ cord with standard 120V plug included. Dimensions (Assembled on stand): 39? Height with head at top of Z travel: 80? Height with head at normal working height: 75? Optional Stand Height 32? Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2″Wx21″D Machine Base Dimension (Bolt Pattern) Approx. 11″Wx14-1/4″D Table Height, machine base (Where it sits on the chip tray) to table, approx. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in this country: US. This item can be shipped to United States.

• Country//Region of Manufacture: china
• Spindle Horsepower: 2 hp
• Brand: Precision Matthews
• Function: Milling, Drilling
• Control: Manual
• Machine Type: Vertical Milling Machine
• Custom Bundle: No
• Voltage: 110 V
• MPN: PM-30MV-w/dro
• Spindle Taper: R8
• Modified Item: No

INCLUDES 3 AXIS DRO INSTALLED AND STAND with Leveling Feet. This machine uses 220V Standard Power! Highlights Of This Machine that set it apart from others on the market. MUCH Larger Travels and work area. Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling – Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper. Mounting surface for much more rigidity over other models in this size range. Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it. Easier to cut accurately – One line on the dial is. One full turn of the handwheel is. Much easier to use than those with odd metric conversions. 50-3000 RPM variable speed with the turn of a knob, properly set up with Low and High for a wider speed range, and plenty of power at lower speeds. Precision ground ways for smoother movements – Not just rough milled. Thrust Bearings in leadscrew ends – not bushings – Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any. Failure prone plastic gears (And the hassle of changing them when stripped). Variable Speed with Belt Drive and Brushless DC Motor. 3 Axis DRO Installed. Stand with Leveling Feet. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. PM30MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4? Face Milling Capacity 3-1/2? Cross Travel (Y Axis) 8-3/4? Longitudinal Travel (X Axis) 23? Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 14? Max Distance Spindle to Table 17? Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 14mm, our 9/16? Kit listed is sized for this machine. Range of Spindle Speeds 50-3000 rpm, 2 Ranges (Properly set up with high and low range belt positions for more power at lower speeds as it should be). Headstock Tilt Left & Right ±90°. Net Weight (Not Including Base) 530 LBS. Net Weight (With Base) 605 LBS (630 LBS with base w/leveling feet). Country or Origin: China. Power Required 220V, Single Phase, 10 Amp. Cord Connection/Type: Cord approx. 5′ length, User to supply plug needed for your outlet 20A 240V With Ground, No Neutral Required. Optional Stand Height: 28? Base w/leveling feet 32? Bolt Pattern, Machine Base Mounting Holes: APPROX. 13-1/8″W x 15″ Front to back, with 1/2? (we recommend waiting until your machine arrives before drilling any mounting holes in case this varies) Table Surface Height (On Stand): 36? With base w/leveling feet 40? Height, Head at normal working height (W/O Stand): 39″ Max Height, Head at top of travel (W/O stand): 48″ Height, Head at normal working height (On Stand): 67 on base w/leveling feet 71? Max Height, Head at top of travel (On stand): 76 on base w/leveling feet 80? Width, Tip to Tip of table handles: 46-1/4″ Dimension Front To Back, from back of chip pan, to front table handle tip: 31″ (Can be pushed back against a wall, and table handle tip will be 31 from wall). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in this country: US. This item can be shipped to United States.

• Country//Region of Manufacture: china
• Spindle Horsepower: 2 hp
• Brand: Precision Matthews
• Function: Milling, Drilling
• Control: Manual
• Machine Type: Vertical Milling Machine
• Custom Bundle: No
• Voltage: 220 V
• MPN: PM-30MV-w/dro
• Spindle Taper: R8
• Modified Item: No

American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH FACTORY-SUPPLIES? Item was as described and arrived quickly. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Before installation, be sure to turn off the power supply of the milling machine. Don’t install the power feed under live condition. The product is supplied by AC110V 50/60Hz Please? Prepare the required power supply for the product. If the product is used in a region not in conformity with the national power supply, please prepare a transformer, avoid using incorrect power supply and result in damage of the product. The product is provided with overload protection, the power supply will be cut out in case of overload or stuck. It can be reset automatically by restarting the power switch. Check whether spiral gear oil is enough when carrying out maintenance. Open the carbon brush cover semiannually to check whether the carbon brush is worn. If the length is less than 7mm, it is recommended to replace the two sets of carbon brushes at the same time. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. Product Manual x 1. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “super-homeonline” and is located in this country: US. This item can be shipped to United States.

• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13\
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: 5 Years
• UPC: 0895800908447
• EAN: 0895800908447
• Brand: VEVOR
• Function: Milling
• Control: Manual
• Machine Type: Milling Machine
• Power Source: Electric
• Max Spindle Speed (RPM): 200 RPM
• Voltage: 110 V
• Model: AS-250
• MPN: ZCXUN00525