PM-727M Precision Benchtop Milling Machine with 3 Axis DRO & STAND! FREE SHIPPING

STAND INCLUDED WITH LISTING! This machine requires a Standard 120V Power Supply! Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard. Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4? Spindle To Table Max Distance for taller work. 8-1/2? Y Axis Travel, More than other machines in this class. 3 Axis DRO Installed. Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered. Drilling Capacity: 1-1/4? Max. End Milling Capacity: 1? Max. Face Milling Capacity: 3? Table Size: 27-1/2? X 7-1/8? Cross Travel (Y Axis): 8-1/2? Longitudinal Travel (X Axis): 15? Table Leadscrew Pitch 10 TPI. 100? Per Turn Table Dial Graduations. 001? Vertical Travel (Z Axis): 16? Max Distance Spindle to Table: 18-1/4? Taper of Spindle: R-8, w/7/16-20 Drawbar Thread Spindle (Quill) Travel: 3? T Slot Size: 1/2? (T Slots are slightly less than 1/2? , actual size 12mm, our 1/2? Kit is sized for this machine) Range of Spindle Speeds: 115 – 1700 rpm, 6 Steps Head Tilt: Left & Right ±90° Motor: 1 HP Net Weight (Not Including Base): 475 LBS Net Weight (With Optional Base): 575 LBS Power Required: 110/120V, 20A Circuit. 5′ cord, Includes 120V Plug with ground Dimensions (Assembled on stand): 39? W x 74? H x 30? D Height with head at top of Z travel: 80? (On Stand) Height with head at normal working height: 75? (On Stand) Optional Stand Height 32? Country of Origin: China. Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2″Wx21″D Machine Base Dimension (Bolt Pattern) Approx. 11″Wx14-1/4″D Table Height, machine base (Where it sits on the chip tray) to table, approx. 8-1/2? Footprint of stand at floor, approx. 14-1/2? W x 21-1/4? Front to back. Average time delivered is 2-7 days depending on how far from Pittsburgh you are located. If you need liftgate service, please message us one you place your order to let us know. Quality Machine Tools / Precision Matthews Machinery Co. 1060 Montour West Industrial Park. We are machinists here too and have been in business for over 20 years. We know our machines and we know what we sell. So if there is any question, we can help.