M ake: BRIDGEPORT Model : 9BRJ Series 1 Serial no. Great working condition Bridgeport Series 1 mill with “J” Head, step speed. Very nice working condition. Available to view under power. Forklift on site for loading. 32″ x 9″ Table. 1-1/2 HP Spindle Motor. Longitudinal Table Travel, X-Axis – manual. Cross Table Travel, Y-Axis. Table to Spindle Nose, min. 80 to 2720 rpm. 220 Volt, 3 Phase. Specifications subject to verification. Items over 1000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. We accept all major credit cards except American Express. Orders are not processed until they’re paid in full.

With decades of proven success partnering with global industries, our materials deliver superior durability. Perfectly suited for Graphite, Carbon Fiber, Ceramics, and Composites. ? EV Diamond Quality. Increase the long tool lifetime. Best Suitable Materials for Machining with CVD Diamond Tools. Dry and Wet milling. Carbon Fiber Reinforced Plastic. Polyethylene PET or PETE.

Bare head casting, appears to be without cracks, repairs or issues. Will need clean up.

Product parameters – Name: electronic power feed, electronic feeders – Model: ALB-310SX (Horizontal) – Main motor power: 95w – Speed range: 0-200 – Maximum speed: 200RPM – Maximum torque: 450in-lb – Power Requirements: AC110V – Applicable models: horizontal turret milling machines, drilling and milling machine, other machinery. Note: Milling machine power feeding easy to install with low noise, large torque, high speed, convenient installation and flexible operation, good appearance, as to meet the requirements of ergonomics. Package Content: 1 x ALB-310SX X-Axis Power feed Milling drill Machine 200RPM 450in-lb 110V (as picture). Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days.

Z-Axis Power Feed Table Mill for Milling Machine 450 in-lb Torque 0-200RPM 110V. Z-Axis power feed is made of aluminuml;Power Parameter: 95Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. Automatic and Manual Control? With this power feed, you have the flexibility to work in automatic or manual control mode. Set it to automatic constant speed for hands-free operation, or manually adjust the speed control knob for more precise milling work. This allows you to tailor the power feed’s performance to your specific needs. Efficient and Stable Operation? The power feed features a Gleason Spiral Bevel Gear, offering a stable transmission ratio, low transmission noise, high transmission efficiency, and high bearing capacity. This ensures smooth and efficient operation, even during fast transmission. Additionally, a special safety device protects the transmission plastic gear and electronic parts from damage in case of collisions or instantaneous reversals. PORTABLE AND EASY TO INSTALL? This power feed for milling machine is compact and portable. Weight: 5kg/11lbs, Size: 74.511.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself. The power feed operates on 95 Watts with an input voltage of 110V. It functions on a 50/60Hz single-phase power supply. The rotate speed is adjustable from 0 to 200 RPM, with an impressive maximum torque of 450in-lb. It also offers a maximum feed rate of 650mm/min and a maximum return speed of 850mm/min, providing efficient and precise milling capabilities. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. We accept Payoneer only. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. We cannot deliver your order if your state is PR. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem.

10 Bit Router Bit Set – 1/2″ & 1/4″ Shank – Yonico 17100. This set contains 10 essential bits needed for the most common routing tasks making it the perfect set for anyone. The bits in this set are of the same top-quality workmanship you have come to expect from Yonico router bits. Most of the bits in this set are 1/2″ shank with one 1/4″. 1 3/8″ Solid Carbide Upcut Spiral. 2 Straight Bits – 1/4″& 1/2″. 1 Flush Trim Bit – 1-1/2″ x 1/2″. 1 Dovetail Bit – 1/2″ x 10°. 1 Chamfer Bit – 45°. 1 Cove Bit – 1/4″ Radius. 1 Roundover Bit – 1/4″ Radius. 1 Slotting Bit – 1/4 H. 1 Rabbet Bit with 6 Bearings. Whether you are a beginner or seasoned woodworker, the bits contained in these router bit sets are essential to hobbyists with just about any level of experience. Each of our large router bit sets include a number of straight bits, edge forming bits, dovetail bits, flush trim bits, rabbet bits and slotting bits. These sets are manufactured to the same high quality standards you have come to expect from the Yonico brand. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top.

1 x 3018 PRO machine. 1 x Emergency Stop. 2 x limit switches Board. 1 x U disk. 1 x Product Manual [English Version]. 1 x NO LASER / 5.5W /10W Laser module. 1 x Off-line controller. Thank you for your understanding. Control software: GRBL control. Work area: 300x180x45 mm (11.8×7.1×1.8″)Frame:420x350x270mm (16.53×13.78×10.63″). Screw: T8 screw, lead 4mm, double copper nut to eliminate backlash. Stepper motor: Nema17 stepper motor 1.3A, 0.25N. Collet: ER11 3.175mm(can be equipped with 0-7mm). Material: PA6 nylon + aluminum profile. Power supply:24V 5.6A power adapter (input voltage 110-240V). 775 Spindle Motor: 12-24VDC 10000RMP. Machining accuracy: about 0.2mm. 1CNC: G-code, TAB, NC, NCC files. 2 Laser: G-code, JPG, DXF file. If used in WIN10 system, performance is not stable. The new GRBL1.1f control board 1. GRBL1.1f firmware, stable performance. Offline engraving (optional offline module), ffline tool setting, engraving. The laser supports PWM/TTL signal control, the power is adjustable from 0-100%! Spindle supports PWM power 0-100% adjustable. Stepper motor overcurrent protection to avoid damage, upgrade integrated stepper motor drive, 2A high current, high stability. The laser directly enters the picture engraving, no programming, no design, Simple and convenient! Professional shell protection, the fan actively dissipates heat, and does not heat up for a long time. The engraving machine adds an emergency stop button & 3pcs of limit Switches.

Available for most manual & CNC Mills with standard R-8 collets or 30 or 40 Taper tool holders. Power Drawbars reduce tool change time and allow more cutting time in the cycle. The whole process using Kurt auto-matic or mechanical Power Locks cutsthe tool change time to 1/4 of the time required to change tools manually with wrenches. An added benefit is consistent on the drawbar rod. Operates on shop air supply, filter/lubricator, regulator and gauge included with each unit- provides clean oiled air to ensure long life. Available for most manual & CNC mills with standard R-8 collets or 30 or 40 taper tool holders. Automate your present “Knee-Type” milling machines by installing a Kurt PowerLock Drawbar. Power Lock Drawbars reduce tool change time and allow more cutting time in the cycle. The whole process using the Kurt mechanical PowerLock Drawbar cuts the tool change time to one-fourth the time required to change tools manually with wrenches. An added benefit is consistent torque on the drawbar rod. When you multiply the time savings for every tool change on all of your mills, it can really add up.

3 piece set: Type 3200/3500-200 Gehärtete umkehr-aufsatzbacken / hardened reversible jaw lathe chuck. From the stockroom of a closing industrial facility. Untested but presumed to be working well.

Dividing Head Indexing Foot Rest Tail Stock. Please ask questions and specific size to be sure it fits your machine. Has a centerline of about 5″ to 6″. In very good condition. You can clean it up a bit to make it look nice.