Used Cincinnati Sabre 500, unit was working and then one day it lost its program maybe cause the battery went bad in the board but we just had board programmed at Fives for 1500 and not going to do it again. Machine is not under power but will work with a program.
Comments Off
NEW HAAS 93-32-5559D Vector Drive 20HP. New drive in original box. Comes with cables and installation instructions as pictured.
Comments Off
Monarch VMC175B VMC, 1996 – Chip Conveyor, Video Available, Available Immediately. Table & Cross Slide Positioning Speed: 600 IPM Milling Feedrates. 01 to 400 IPM Table load capacity: 6,000 lbs. Spindle Speed: 1,300 RPM Weight: 36,000 Equipped With: Chip Conveyor. Spindle Speed: 1,300 RPM Weight: 36,000. Equipped With: Chip Conveyor.
Comments Off
The Fanuc Robodrill Alpha-T10B CNC Drilling & Tapping Machine is in good working condition. Please call for more details or to see the machine working under power. X-AXIS: 19.7″ Y-AXIS: 14.96″ Z-AXIS: 11.81. SPINDLE SPEED: 8,000 RPM SPINDLE TAPER: #35 TOOL CHANGER: 10 ATC. TABLE LOAD: 328 LBS. MACHINE WEIGHT: 3,747 LBS. EQUIPPED WITH: FANUC 16M CNC CONTROL. PLEASE CALL TO DETERMINE A SPECIFIC MACHINE’S LOCATION. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “preciseinc” and is located in this country: US. This item can be shipped to United States.
Comments Off
Tormach PCNC 1100 Series 3 VMC, 2016 – Available Immediately. Table Slots: 3 Slots 5/8? (X, Y, Z) Spindle Nose to Table: 17? Maximum Spindle Center to Column: 11? Spindle Nose Diameter: 3 3/8? Net / 1296 lbs. Gross (Excludes Stand) Max Workpiece : 500 lbs. Maximum Power Requirements: 230-250 VAC 50/60 Hz single phase (primary). 115 VAC 50/60Hz (secondary). Frame and Table: Cast Iron Frame and Table, with Hand Scraped Hydrodynamic Ways and Tapered Adjustment Gibs Way Surfaces: Low friction PTFE-Filled Acetyl Bonded Sliding Surface. Similar to Rulon® and Turcite Spindle Taper: R8 (optional BT30 Retrofit Available) Spindle Construction: Cartridge with Spindle Lock Spindle Drive: Emerson Control TechniquesT Sensorless Vector Technology with Fold-Back Logic – 1100W Continuous, 2800W Peak. Spindle Power: 1.5 hp Brushless AC 3-Phase Induction Motor, Vacuum Pressure Impregnated (VPI) Windings Spindle Speed: 100 to 5140 RPM Transmission: V-Belt Drive, 2 Ratios Feed Rate: 110 IPM (X, Y) 90 IPM (Z). You might also like. Freedom FMC 4020-STD VMC, 2020 – 12,000 RPM, Low Hours, TSC, Probe, Auger, 30ATC. Kitamura MyCenter 1B VMC, 1986 – Pallet Changer. 175 Ton Verson TA-910 Press – Tooling Included. Motoman K10M (2) Station Cell Robot, 2016 – Flow 7X 50 HP Intensifier Pump. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in this country: US. This item can be shipped to United States.
Comments Off
Lagun 3 Axis CNC Knee Milling Machine 4hp. This heavy duty knee milling machine was in service and working five years ago, but has been in storage since, and is not currently under power. More available if needed. It appears to have these specs. It is located in El Segundo, CA and available for viewing most times. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jacksonpbarry” and is located in this country: US. This item can be shipped to United States.
Comments Off
Haas CM-1 VMC, 2019 – 30K RPM, 20 Taper, Low hours, Available Tooling. We are pleased to offer the following for your consideration. X Axis Travel: 12. Y Axis Travel: 10. Z Axis Travel: 12. Table Size: 20″ x 10″. Max Table Load: 150 LBS. Spindle Motor: 5 HP. Spindle Speed: 30,000 RPM. Spindle Taper: ISO20 CT. Tool Changer: 20 ATC. Max Torque 8 ft-lbf. Max Weight on Table 150lbs. Max Cutting 500 ipm. Rapids on X 757 ipm. Rapids on Y 757 ipm. Rapids on Z 757 ipm. Max Thrust X 1149 lbf. Max Thrust Y 1149 lbf. Max Thrust Z 1149 lbf. Max Tool Diameter 2.3. Max Tool Weight 5 lb. Tool-to-Tool (avg) 3.2 s. Dimensions: 78″ x 58″ x 87. Weight: 2,100 LBS. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in this country: US. This item can be shipped to United States.
Comments Off
Haas VF-4 CNC VMC, 1998 – Available Immediately, Video Available, 4th Ready, Pal. We are pleased to offer the following for your consideration. Table Size: 52″ x 18″. Table Load: 3,500 lbs. Spindle Nose to Table Top: 4″ – 29″. Automatic Pallet Changer: 2 Positions. Automatic Tool Changer: 24 Positions. Spindle Taper: CAT 40. Spindle Motor: 20 HP. Max Spindle Speed: 7,500 RPM. Electric Requirements: 208/230V; 3 Ph; 50/60 Hz. Weight: 14,700 lbs. Dimensions: 125″ x 110″ x 118. 24 Station Auto Tool Changer. 2 Position Auto Pallet Changer. Processer No Longer Works. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in this country: US. This item can be shipped to United States.
Comments Off
DMG Mori DMU 50 VMC, 2010 – Full 5 Axis, Siemens, Under Power, Available for Ins. We are pleased to offer the following for your consideration. B-Axis Travel: -5 Deg – 110 Deg. C-Axis Travel: 360 Deg. Tool Magazine Capacity: 30. Spindle Taper: Cat 40 (Big Plus). Table Size: 24.8″ X 19.7″. Max Workpiece Swing Diameter: 21.2. Max Workpiece Height: 17.5. Spindle Speed: 10,000 RPM. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “DMG Mori DMU 50 VMC, 2010 5 Axis, Siemens, Under Power, Available for Inspecti” is in sale since Tuesday, October 12, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Aurora, Colorado. This item can be shipped to United States.
Comments Off
