Table Size 36″ x 14″. Table Load Capacity 3,000 Lbs. Spindle Nose to Table Top 4″ – 24″. Spindle Taper CAT 40. Spindle Speed 8,100 RPM. Spindle Motor 40 HP. Tool Magazine Capacity 24+1 Side Mount ATC. Maximum Tool Weight 12 lbs. Rapid Traverse Rates 1,000 IPM. Cutting Feed Rate 0.1 – 650 IPM. Machine Dimensions (approximately) 88″ x 93″ x 106. New Spindle installed 4/17/2020. 4th Axis Drive and Wiring. Side Mount Tool Changer. Thru Spindle Coolant Prepped. Wireless Intuitive Probing System Spindle Probe Missing. Early Power Failure Detection Module. 750 MB Expanded Memory. All specifications are assumed to be correct but must be confirmed by purchasing entity. The item “Haas VF-2 VMC, 2012 4th Axis Rotary Table, WIPS, Thru Spindle Coolant, Auger” is in sale since Monday, May 11, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “chrisjtm” and is located in Janesville, Wisconsin. This item can be shipped to United States.

• Spindle Horsepower: 40 hp
• Country/Region of Manufacture: United States
• Machine Type: Machining Center
• Table Length: 35 in – 39.9 in
• Max Spindle Speed (RPM): 8,100
• Model Year: 2012
• Power Source: Electric
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 16 in – 20 in
• Spindle Taper: CAT 40
• Brand: Haas
• Table Width: 10 in – 14.9 in

Haas DT-1 VMC 2010 with: Haas CNC Control, 4th Axis Drive, Programmable Coolant, Chip Auger. Category: Machining Centers Sub Category: Vertical Machining Centers. 6265 Age: 2010 Serial # : 1076660 Location: Fullerton, CA. Table (LxW) 26″ x 15″. Weight on Table 250 lbs. Z-Axis Travels 15.5. Spindle Speed 10000 RPM. Tapping Speed 5000 RPM. Haas CNC Control, 4th Axis Drive, (10) Tool Holders, Programmable Coolant, Chip Auger, and Coolant System. TERMS AND CONDITIONS OF SALES. STANDARD TERMS AND CONDITIONS OF SALE. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale, will be re-listed. Any item not picked up within 30 days from End of Sale, will be charged 10% of items cost per month for storage. It is the Buyers (users) responsibility to provide proper safety devices and equipment for any particular use, operation, or setup, and to take all necessary steps to conform to all federal, state, and local government safety standards, including OSHA. Ships to: United States. You are covered by the. If you received an item that is not as described in the listing. Haas CNC Control, 4th Axis Drive, Programmable Coolant, Chip Auger, and Coolant System. The item “Haas DT-1 VMC 2010, 4th Axis Drive, Prog. Coolant, Chip Auger, (10) Tool Holders” is in sale since Friday, January 22, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “act4machinery” and is located in Fullerton, California. This item can be shipped to United States.

• Model: DT-1
• Modified Item: No
• Spindle Horsepower: 15 hp
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Machine Type: Vertical Milling Machine
• Table Length: 25 in – 29.9 in
• Max Spindle Speed (RPM): 7501 – 10000
• Model Year: 2010
• X-Axis Travel Bed: 16 in – 20 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 10 in – 15 in
• MPN: Does Not Apply
• Function: Drilling
• Brand: Haas
• Table Width: 15 in – 19.9 in
• Control: CNC

LATHE / MILL FLEXIBLE COOLANT FEED PIPE. CAN BE USED ON ANY MACHINE WERE LIQUID IS REQUIRED. 13″ / 325MM LONG 1/4″ BSP THREADED. SIMPLY BEND PIPE TO WERE COOLANT IS REQUIRED. IT WILL THEN LOCK IN POSITION. The item “RDGTOOLS 1/4 COOLANT FEED PIPE SUIT MILLING MACHINE” is in sale since Wednesday, June 22, 2011. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: HBM RDGTOOLS MYFORD

Haas VF-2 VMC, 2013 – 4th Axis Rotary Table, WIPS, Thru Spindle Coolant, Auger. We are pleased to offer the following for your consideration. Table Size 36″ x 14″. Table Load Capacity 3,000 Lbs. Spindle Nose to Table Top 4″ – 24″. Spindle Speed 8,100 RPM. Tool Magazine Capacity 24+1 Side Mount ATC. Maximum Tool Weight 12 lbs. Rapid Traverse Rates 1,000 IPM. Cutting Feed Rate 0.1 – 650 IPM. Machine Dimensions (approximately) 88″ x 93″ x 106. 4th Axis Drive and Wiring. Side Mount Tool Changer. Thru Spindle Coolant – 300 psi. Aux Coolant Filter System. Wireless Intuitive Probing System. Internal High-voltage Isolated Transformer for 380-480V. Early Power Failure Detection Module. 750 MB Expanded Memory. Manual Tailstock, 6 Center Height. Tooling Package Included at Additional Cost. All specifications are assumed to be correct but must be confirmed by purchasing entity. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Haas VF-2 VMC, 2013 4th Axis Rotary Table, WIPS, Thru Spindle Coolant, Auger” is in sale since Friday, April 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Austin, Texas. This item can be shipped to United States.

• Brand: Haas

Fadal MP CNC Control. Spindle Nose to Table Top…………………………………………………………………….. Coolant Tank & Pump. Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. All items are subject to prior sale. 520 MACHINERY SALES LLC COMPANY INFORMATION. 520 Machinery Sales is a new and pre-owned equipment full service, stocking, dealer out of Central and Northern Illinois. We are proud members of the MDNA and stand behind the equipment we sell. We specialize in the sale of Daewoo/ Doosan, Haas, Milltronics, Mazak, Mori Seiki, Kitamura and Miyano CNC equipment. Do you have a machine sitting that has not been running for awhile? Are you happy with the trade value of your machine? 1 We stock over 1 million dollars in pre-owned equipment. 2 We have 11 pre-owned equipment salesmen marketing our used equipment across the United States, Canada, Mexico, and India. 4 Our new equipment division is the exclusive distributor for Samsung, Toyoda, Milltronics, Murata, Mitsui Seiki, and Ganesh in Central and Northern Illinois as well as Northwest Indiana. 7 new equipment salesmen are working towards creating new equipment deals. This exposure to local shops creates plenty of used sales opportunities. We are extremely aggressive with our marketing and send mass emails to as many prospects as possible in order to create sales opportunities. 6 Our overhead is low… We can take a deal for less commission than our competitors. We are not trying to take advantage of slow times and get rich off of every deal. 7 We are good at what we do and have an excellent track record with the people that have done business with us. The item “Used Fadal TRM CNC Tool Room Vertical Machining Center Mill Coolant Tank Pump 04″ is in sale since Wednesday, October 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “520machinery” and is located in Schaumburg, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Model: TRM
• Modified Item: No
• Spindle Horsepower: 5
• Custom Bundle: No
• Machine Type: Tool Room Mill
• Model Year: 2005
• Power Source: Electric
• Non-Domestic Product: No
• Type: CNC, Vertical
• Spindle Taper: CAT 40
• Function: Drilling
• Brand: Fadal
• Control: CNC

Coolant System 1PH for lathes and Milling Machines. System 1PH for lathe and Milling Machine. System suitable for Lathes, milling machines, Grinders and more. With convenient carrying handles for portability. Includes Removable Swarf Catcher tray. Supplied with a flexible. Pipe with magnetic base holder. Approx dimensions of Tank: 38x25x21cm. Tank cap – approx 5 litres. Motor single phase 90W. 240 volts 1 Phase. This is intended for light industrial use and ideal for hobbyist machines. Postal costs to customers in Italy will also be liable to a surcharge for items sent by post to cover the cost of’International Signed For’. The item “Coolant System 1PH for lathes and Milling Machines” is in sale since Tuesday, September 10, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “harryuk123″ and is located in London. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

• MPN: AMA-AC-CS90W
• Brand: Amadeal

HAAS VF-SS3YT VERTICAL MACHINING CENTER. TRAVELS: 40X X 26Y X 25Z. 12,000 MAX RPM. POWERED UP AND AVAILABLE FOR INSPECTION IN. IN EXCELLENT CONDITION MECHANICALLY AND COSMETICALLY. PLEASE SEARCH SMS ENGINEERING 8O544373OO. VF-2 VF-3 VF-3YT VF-4 VF-5 HAAS. HAAS VF-3SSYT FOR SALE MFG 2010 – YouTube. The item “HAAS VF-3SSYT WITH THRU SPINDLE COOLANT, 5th READY, PROBING, $36K OPTIONS VF-3YT” is in sale since Wednesday, June 10, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eskridgegoat” and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

• Model: VF-3SSYT
• Spindle Horsepower: 40 hp
• Country/Region of Manufacture: United States
• Machine Type: Vertical Milling Machine
• Max Spindle Speed (RPM): 12000
• Model Year: 2010
• Power Source: Electric
• X-Axis Travel Bed: 40
• Y-Axis Travel Bed: 50
• MPN: VF-3SSYT
• Spindle Taper: CAT 40
• Function: Milling
• Brand: HAAS
• Control: CNC
• Voltage: 220 V

Okuma Genos M460-VE VMC 2016 Okuma OSP-P300M Control 32-ATC Chip Conveyor. Category: Machining Centers Sub Category: Vertical Machining Centers. 6130 Age: 2016 Serial # : 193760 Location: Fullerton, CA. Table Size (LxW) 39.37″ x 18.11″. Load Capacity 1,543 lbs. Z-Axis Travels 18.11. Spindle Speed 12000 RPM. Motor 30 / 25 HP. Tool Capacity 32 ATC. Okuma OSP-P300M CNC Control, 32-ATC, and Chip Conveyor. TERMS AND CONDITIONS OF SALES. STANDARD TERMS AND CONDITIONS OF SALE. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale, will be re-listed. Any item not picked up within 30 days from End of Sale, will be charged 10% of items cost per month for storage. It is the Buyers (users) responsibility to provide proper safety devices and equipment for any particular use, operation, or setup, and to take all necessary steps to conform to all federal, state, and local government safety standards, including OSHA. Ships to: United States. You are covered by the. If you received an item that is not as described in the listing. Serial # : 193760 Location: Fullerton, CA. 39.37″ x 18.11″. Rapid Traverse (X, Y) / Z. 1,575 IPM / 1,262 IPM. Cutting Feedrate (X, Y, Z). 30 / 25 HP. 110″ x 85″ x 108. Okuma OSP-P300M CNC Control, Renishaw OMT-2T Probe, and Chip Conveyor. The item “Okuma M460-VE VMC 2016, OPS-P300M Control, 32-ATC, Chip Conveyor, Coolant Tank” is in sale since Thursday, April 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “act4machinery” and is located in Fullerton, California. This item can be shipped to United States.

• Model: Genos M460-VE
• Modified Item: No
• Spindle Horsepower: 30 hp
• Country/Region of Manufacture: Unknown
• Custom Bundle: No
• Machine Type: Vertical Milling Machine
• Table Length: 35 in – 39.9 in
• Max Spindle Speed (RPM): 10001 – 15000
• Model Year: 2016
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 16 in – 20 in
• MPN: Does Not Apply
• Function: Vertical Machining Center
• Brand: Okuma
• Table Width: 15 in – 19.9 in
• Control: OSP-P300M

Haas Mini Mill VMC, 2004 – Rigid Tap, Coolant Pump, Under Power. We are pleased to offer the following for your consideration. Table Size: 36″ X 12″. Spindle Speeds: 6,000 RPM. Spindle Taper: CAT #40. Tool Capacity: 10 ATC. Motor: 7.5 HP. Max Load on Table: 500 lbs. Spindle Nose to Table: 14 (Max). Spindle Nose to Table: 4 (Min). Weight: 4,000 lbs. All specifications are assumed to be correct but must be confirmed by purchasing entity. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power” is in sale since Wednesday, February 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Los Angeles, California. This item can be shipped to United States.

• Brand: Haas

Haas VF-3 VMC, 2011 – 4th Axis, Thru Spindle Coolant, Video. We are pleased to offer the following for your consideration. 48 x 18 Table Load (max) 3,500 LBS X-Axis Travels 40 Y-Axis Travels 20 Z-Axis Travels 25 Spindle Nose to Table Top 4.2 29.2 Spindle Speed 7,500 RPM Spindle Taper CAT40 Spindle Motor / Drive Type 20 H. / Vector Drive Tool Changer Type / Positions. 24 ATC Machine Dims / Weight 118 L x 90 D x 96.5 H / 13,500 Lbs. 4th Axis Rotary Table Haas CNC Control 2 Speed Gear Box Through Spindle Coolant Remote Jog Handle & USB Multi Auger Chip Conveyor Tooling available at additional cost. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Haas VF-3 VMC, 2011 4th Axis, Thru Spindle Coolant, Video” is in sale since Friday, February 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Oklahoma City, Oklahoma. This item can be shipped to United States.

• Brand: Haas