THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, GEARED HEAD FREE SHIPPING” is in sale since Friday, December 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-727M with PM-727 STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: China

Bridgeport M Head from a milling machine. This sale is for the head only, The’swivel’ or’knuckle’ is not included. Like in the last photo with all the’black’ on it. Quill is 7 B&S Brown and Sharpe. US Motor, 220 volt, ½ HP, 3-phase. SN 519610, 1200 rpm I ran this motor off a rotary phase converter and not a static phase converter. A little damage to the casting where the oilier screws in. This does not in any way impact the operation, but I want to provide full disclosure to all known flaws. Comes with the following items. Collet set (All of them are 7 B&S taper). 3/8 Cant read anything on it but looks like Bridgeport brand. I have no idea why a 21/64. 7/16 Unknown modern brand (probably Chinese). A ½ shank is tight, and a 31/64″ drill is a little loose – I think it is 1/2″ Bridgeport brand… But I cannot be certain. Jacobs brand drill chuck arbor 7 B&S to 3JT (Jacobs Taper). Jacobs brand drill chuck arbor 7 B&S to 6 JT (Jacobs Taper). Three (3) National Twist Drill and Tool Company Left Hand cut (LH) 6 flute 7/8 HSS endmills (non center cutting) Length of flute is about 1.470. One (1) National Twist Drill and Tool Company Left Hand cut (LH) 6 flute 7/8 HSS endmills (non center cutting) Length of flute is about 1.130. This one has had the end portion of the flutes cut or ground of f. Local pick-up is free. My height weight and dimensions are an estimate. I will crate, I will bring it to the depot and get it going on my end. I will crate and bring to the depot for free. Here’s a video of the head running. The item “Bridgeport Milling Machine M Head with Collets, Arbors, End Mills 1/2hp 3ph 220v” is in sale since Tuesday, January 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “yaker” and is located in Rocky Mount, Virginia. This item can be shipped to United States.

• Brand: Bridgeport
• Model: M Head
• Country/Region of Manufacture: United States

Recent searches

• bridgeport m head

Here is a Bridgeport Dividing Head Indexer Tail Stock. The center height is adjustable from 7-7/8″ to 8-9/16″. It has 5/8″ keyways in the 5″ x 6-3/8 base. The paint is chipping but everything moves and turns smoothly. Check the pictures for condition as the items we sell are used and may have marks or blemishes. Check out the other items in our store at LnL Deals. The item “Bridgeport Dividing Head Indexer Tail Stock Machinist Tool” is in sale since Tuesday, November 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lbkos14mvy” and is located in Elizabethtown, Pennsylvania. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Bridgeport

9 x 42 table. Anilam digital readout, Bridgeport vise, collets, Bridgeport boring head and Bridgeport strap clamps. The item “Bridgeport Milling Machine Series I 2hp, 2J Head with Servo Power Feed and DRO” is in sale since Friday, December 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “merlin0697″ and is located in Milford, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Country/Region of Manufacture: United States

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Monday, December 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States.

• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• MPN: 01-000
• Brand: Edge Technology
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head

Here is a nice. Dividing / Indexing Head with a tail stock and 2 dividing plates. The head accepts #4 morse taper chuck or center. The thread OD for mounting a jaw chuck is 2.675 x 5 TPI. The dividing plates are 7-1/2 dia. The height of the centers are 5-1/8. The center on the tail stock has some damage (see last pic). The head weighs 85 lbs and the tail stock weighs 24lbs. The base of the head is 6-1/4″ x 8″. It stands 8-1/2 tall from the base to to the top of the body. This is also listed for sale locally so the listing could end at any time. Check the pictures for condition as the items we sell are used and may have marks or blemishes. Check out the other items in our store at LnL Deals. The item “Dividing Indexing Head & Tail Stock, Milling, Machinist Tool, Index, Gear” is in sale since Tuesday, December 18, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lbkos14mvy” and is located in Elizabethtown, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Non-Domestic Product: No

Up for sale is the listing shown in the title. See all pictures for the best description. Its a good running Toolroom machine. It has a Supermax base. We stock all Bridgeport parts if you need anything as well. So if Interested at all, contact me first to go over details and for a quote. Check out my other listings for machinery parts and lots more. Thank you for looking at my listing. The item “Bridgeport Milling Machine 1 HP 42 Table J Head” is in sale since Tuesday, December 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “mattpokerpro7750″ and is located in Plainville, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport

#3 PLAIN MILWAUKEE HORIZONTAL MILL. 15 1/2 x 66 TABLE. WILL LOAD YOUR TRUCK FOR FREE. THANKS FOR LOOKING FROM THE MARCUMMACHINESHOP. The item “Kearney and Trecker Milwaukee #3 Plain Horizontal Mill VERTICAL HEAD” is in sale since Thursday, October 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “greg9991″ and is located in New London, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Kearney & Trecker Milwaukee
• Custom Bundle: No
• Non-Domestic Product: No
• Modified Item: No

JET JMD-40GH Geared Head Mill Drill. Heavy-duty design allows for a variety of precision drilling applications. Full power to the cutting tools through 6 speed geared head. CSA/CUS: Following strict guidelines and electrical requirements, this JET Mill Drill is CSA/CUS certified. Calibrated fine down feed built in. Easy to read internal depth gauge. Head tilts left & right 90 degrees. Rapid spindle speed changes through quick-select gear shift levers. Range of Spindle Speeds. 63 – 1,550 RPM. Distance Spindle to Table. Number of Spindle Speeds. Longitudinal Table Travel (Xaxis). WHY OUR CUSTOMERS KEEP SHOPPING WITH US. SECURE & HASSLE FREE SHOPPING. We are available 7 days a week. All corded products are designed to work with North American 110/120V outlets only. The item “JET 351040 Heavy-Duty Geared Head Mill Drill with Forward/Reverse Switch New” is in sale since Friday, October 20, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “cpo-outlets” and is located in Suwanee, Georgia. This item can be shipped to United States.

• Brand: JET
• MPN: 351040
• Freight Delivery Option: Curbside
• California Prop 65 Warning: This product can expose you to Titanium Dioxide, which is known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov.
• Length: 28 in.
• Width: 39.25 in.
• Height: 42.5 in.
• Weight: 628 lbs.
• Base Dimension: 24-1/4 in. x 15-15/16 in.
• Column Diameter: 4-1/2 in.
• Distance Spindle to Table: 15-3/4 in.
• Drilling Capacity: 1-1/4 in.
• End Mill Capacity: 3/4 in.
• Face Mill Capacity: 4 in.
• Longitudinal Table Travel (Xaxis): 20-1/2 in.
• Motor: 1-1/2 HP
• Number of Spindle Speeds: 6
• Number of TSlots: 4
• Quill Diameter: 3 in.
• Range of Spindle Speeds: 63 – 1,550 RPM
• Spindle Taper: R-8
• Spindle Travel: 5 in.
• Swing: 21 in.
• TSlot Size: 5/8 in. x 1 in.
• Table Size: 32-1/4 in. x 9-1/2 in.

I have for your consideration, a Kearney and Trecker 2 D rotary head mill. It is in excellent condition with original flaking on the ways. It comes with a large selection of tooling. Large collets from 1/2″ to 3/4″, and 4 adapters with a full set of smaller collets. It has an Anilam 2 axis digital readout that is set up for. It is a 220 volt 3 phase machine. This is the very desirable power knee machine with full up and down travel and functioning limit switches. It has a power feed for the table. Y axis is manual only. Also not listed is all the manuals that come with it. There are couple specialty wrenches that come with it that are not in the photos as well. This machine was NEVER abused. It is in excellent condition. All the oil cups are clear and oil flows well through them. I can recommend a machinery mover if you need. The item “Kearney Trecker Rotary Head Mill” is in sale since Sunday, November 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “fendermaster” and is located in Bay City, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: Kearney Trecker
• Model: 2D
• Country/Region of Manufacture: United States