Hi you are looking at a pnuematic impact power draw bar for a cnc variable speed r8 collet import and bridgeport type milling machine. Jet, msc, atrump, wt tool, acra, acer, chevlair, enco, travers, supermax, and many more.

One screw removes top part to give access to draw bar. Can be mounted in many positions around the head to fit your own preference.

Handle fully adjustable to fit your preference and to take up any wear that may take place over time. Comes assembled complete with impact wrench ready to mount on your mill and use. If your collet sticks in the spindle return the impact to the top and bring it down and strike the drawbar as you would with a hammer there is also a regulator built in the impact wrench to keep from over tightening the drawbar.. All of the main body is made and assembled in our shop here at m&t machine , taylorsville n.

We have used this type power draw bar in our shop for more than 10 years with no problems. Any questions call 828-632-1500 home.The item “CNC MILLING MACHINE VMC POWER DRAWBAR FOR BRIDGEPORT OR IMPORT MILLING MACHINE” is in sale since Saturday, June 28, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can be shipped to North, South, or Latin America and to all countries in Europe and to Australia.

• Brand: M&T MACHINE
• Model: DB-1000VS
• MPN: DB-1000VS
• Country of Manufacture: United States

This is a steel adapter , not a flimzy aluminum tool, which allows you to replace the hand crank on your bridgeport or import clone. Lift that knee up and down. By using a battery powered drill motor with a 1/2 inch chuck.. This is a great shoulder saver for us older machinists. This will fit all mills with a. Shaft and a 9 cog interface. You can also use any 1 wrench as a lever source. This tool will work on. Bridgeports, comets, enco, supermax, victor, jet, alliant, acer, sharp, chevalier, and webb with a 9 cog interface. Here is a video of this tool in action using a $69.00 robie drill from home base. My mill table has a 100 pound vise and a 150 pound turn table on it!The item “Bridgeport and Import Milling Machine power knee lift tool easy on the back” is in sale since Wednesday, February 20, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cathiesmachine” and is located in Redding, California. This item can be shipped worldwide.

It works from air pressure 90 psi max. A hugh time and aggravation saver no lost time looking for your wrench or hammer. Main body made of 6061 aluminum, main front slide is made with steel rod and nylon bushing, for long life.

One screw removes top part to give access to draw bar. Can be mounted in many positions around the head to fit your own preference. Comes assembled complete with impact wrench ready to mount on your mill and use. All parts made in our shop here at m&t machine , taylorsville n. 28681 usa except the impact wrench and fasteners.

We developed this power drawbar in our shop beware there are inferior copies out there but get the original here. We have used this type power draw bar in our shop for more than 10 years with no problems. Their are copies out there please support our time spent on research and development you will not regret it {requires you drill three 1/4-20 holes in the top of your milling head to mount the power drawbar} installation instructions included. Thank you very much for looking.The item “BRIDGEPORT IMPORT MILLING MACHINE J HEAD POWER FEED DRAWBAR STEP PULLEY HEAD” is in sale since Thursday, June 06, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can only be shipped to Australia.

• Brand: M&T MACHINE
• Model: DB1000-SP
• MPN: DB1000-SP
• Country of Manufacture: United States

Hi you are looking at a power draw bar for a variable speed r8 collet import and bridgeport type milling machine. Jet, msc, atrump, wt tool, acra, acer, chevlair, enco, travers, supermax, and many more. The most simple and economical power drawbar out there. It works from air pressure 90 psi max. A hugh time and aggravation saver no lost time looking for your wrench or hammer.

Main body made of 6061 aluminum, main front slide is made with steel rod and nylon bushing, for long life and to dampen any vibration from the head. One screw removes top part to give access to draw bar.

Can be mounted in many positions around the head to fit your own preference. Handle fully adjustable to fit your preference and to take up any wear that might happen over time. Comes assembled complete with impact wrench ready to mount on your mill and use. If your collet sticks in the spindle return the impact to the top and bring it down and strike the drawbar as you would with a hammer.
There is also a regulator built in the impact wrench to keep from over tightening the drawbar.. We developed this power drawbar in our shop and have used this type power draw bar in our shop for more than 10 years with no problems. Beware there are inferior copies out there so please get the original and support our time spent on reseach and development. Any questions call 828-632-1500 home. Thank you very todd and shannon.

This item can only be shipped to Japan.

• Brand: M&T MACHINE
• Model: DB-1000SP
• MPN: DB-1000VS
• Country of Manufacture: United States
• UPC: 0610708255963

Recent searches

• power drawbar for bridgeport R8

Hi you are looking at a power draw bar for a variable speed r8 collet import and bridgeport type milling machine. Jet, msc, atrump, wt tool, acra, acer, chevlair, enco, travers, supermax, and many more. The most simple and economical power drawbar out there. It works from air pressure 90 psi max. A hugh time and aggravation saver no lost time looking for your wrench or hammer. Main body made of 6061 aluminum, main front slide is made with steel rod and nylon bushing, for long life and to dampen any vibration from the head. One screw removes top part to give access to draw bar. Can be mounted in many positions around the head to fit your own preference.
Handle fully adjustable to fit your preference and to take up any wear that may take place over time. Comes assembled complete with impact wrench ready to mount on your mill and use. If your collet sticks in the spindle return the impact to the top and bring it down and strike the drawbar as you would with a hammer there is also a regulator built in the impact wrench to keep from over tightening the drawbar.. There are copies out there so beware get the original and please support our time invested in reseach and development. All of the main body is made and assembled in our shop here at m&t machine , taylorsville n. We have used this type power draw bar in our shop for more than 10 years with no problems. Any questions call 828-632-1500 home. Thank you very much todd and shannon.The item “BRIDGEPORT AND IMPORT MILLING MACHINE POWER DRAWBAR” is in sale since Saturday, December 29, 2012. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina.

This item can only be shipped to Australia.

• Country of Manufacture: United States
• Brand: M&T MACHINE
• Model: DB-1000VS
• MPN: DB-1000VS
• UPC: 0610708255963

You will love this product! Please note: this will not fit the bridgeport j head machines, see my other listings for j head power drawbars…..

The item “Power Draw Bar for Bridgeport & Import mills Great buy” is in sale since Monday, December 05, 2011. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can only be shipped to Japan.

Hi you are looking at a pnuematic impact power draw bar for a variable speed r8 collet import and bridgeport type milling machine. Jet, msc, atrump, wt tool, acra, acer, chevlair, enco, travers, supermax, and many more. The most simple and economical power drawbar out there. It works from air pressure 90 psi max. A hugh time and aggravation saver no lost time looking for your wrench or hammer.

Comes assembled complete with impact wrench ready to mount on your mill and use. If your collet sticks in the spindle return the impact to the top and bring it down and strike the drawbar as you would with a hammer there is also a regulator built in the impact wrench to keep from over tightening the drawbar..
All of the main body is made and assembled in our shop here at m&t machine , taylorsville n. We have used this type power draw bar in our shop for more than 10 years with no problems.

The item “PNUEMATIC IMPACT POWER DRAWBAR FOR BRIDGEPORT OR IMPORT MILLING MACHINE NEW” is in sale since Monday, June 24, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”.

The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can only be shipped to Australia.

• Country of Manufacture: United States
• Brand: M&T MACHINE
• Model: DB-1000VS
• MPN: DB-1000VS
• UPC: 0610708255963

Hi you are looking at a power drawbar for a step pulley head import and bridgeport type milling machine. Jet, msc, atrump, wt tool, chevlair, enco, travers, supermax, and many more. The most simple and economical power drawbar out there. Just $124.00 for a limited time.

It works from air pressure 90 psi max. A hugh time and aggravation saver no lost time looking for your wrench or hammer. Main body made of 6061 aluminum, main front slide is made with steel rod and nylon bushing, for long life. One screw removes top part to give access to draw bar. Can be mounted in many positions around the head to fit your own preference.

Comes assembled complete with impact wrench ready to mount on your mill and use. All parts made in our shop here at m&t machine , taylorsville n. 28681 usa except the impact wrench and fasteners.

We developed this power drawbar in our shop beware there are copies out there but get the original here. We have used this type power draw bar in our shop for more than 10 years with no problems. Their are copies out there but please support us and our time invested in research and development you will not regret it {requires you drill three 1/4-20 holes in the top of your milling head to mount the power drawbar} installation instructions included.

The item “BRIDGEPORT AND IMPORT MILLING MACHINE J HEAD POWER DRAWBAR STEP PULLEY HEAD” is in sale since Thursday, March 29, 2012. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can only be shipped to Australia.

• Country of Manufacture: United States
• Brand: M&T MACHINE
• Model: DB1000-SP
• MPN: DB1000-SP