BRIDGEPORT SERIES II CNC MILLING MACHINE + HOLDERS AND 6 INCH KURT VISE (OC425). SERIES 1 CNC VERTICAL MILL, vertical, Max. ADJUSTABLE V-RAM ON HEAD POSITIONING. TABLE SIZE 12-1/2′ x 34. TABLE TRAVEL X 18. SADDLE TRAVEL Y 12. QUILL TRAVEL Z 5. RAPID TRAVERSE X Y Z 120 IPM. 2 – 32 IPM. SPINDLE SPEEDS 60-4200 RPM. SPINDLE MOTOR 2 HP. SPINDLE TAPER #200 UNIVERSAL QUICK CHANGE. THROAT DISTANCE 6-3/4″ – 18-3/4″. TABLE LOAD CAPACITY 300 LBS. ELECTRICAL REQUIREMENTS 230/460V, 3PH. MILL IS IN EXCELLENT CONDITION. SERIAL # CNC 3362. WE HAVE OVER 20 BRIDGEPORT MILLS AVAILABLE FOR SALE. IF YOU ARE LOOKING TO SET UP A SHOP THIS IS A GREAT OPPORTUNITY. # 1800 573 7019. General Information: You can preview unit at our warehouse in Southern, California. 1800 573 7019 SE HABLA ESPAÑOL. A GLOBE ENTERPRISES INC. Toll Free # 1800 573 7019. Fax # 1800 573 7019. The item “BRIDGEPORT SERIES I CNC MILLING MACHINE + HOLDERS AND 6 INCH KURT VISE (OC425)” is in sale since Thursday, November 06, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “softie777″ and is located in Huntington Beach, California. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

• Country/Region of Manufacture: United States
• Brand: Bridgeport
• Model: SERIES I CNC

Hi folks , here is a pamgren 8 inch X-Y rotary – indexing table , that came from a shop that no one has been in for 20 years , the building had no heat , so most of the tooling has heavy rusting , watch. So this was rusty , i heated it up with a heat gun to get the grease out of the worm gears which actually protected it internally , then i put it in my new electrolysis tub for a day , and it came out quite. Then i washed it with vinegar , then soaked it in a lite oil bath , abracadabra here she is every thing turns nicely with no excessive play. This came from a one man shop i dont think it was used much at all. Bottom line if your doing work for n. A , on the space shuttle , this may not be the tool for you, but short of that this is pretty darn nice , the model number is 82 85-1. If you have any questions. At all or if you just want to call me to waist of few minutes of my time then please do so , i love talking iron. 215 290 9413 greg. Hi folks this actually might be a number 62 85-1 , instead of a 82 85 -1 , the 6 and the 8 are hard to tell apart. If that matters to anyone , also dont get me wrong this tool is in nice useable shape. If you need or want a tool like this , here is the real deal.. The item “Bridgeport /palmgren rotary table, vintage palmgren 8 inch #8285-1, index table” is in sale since Thursday, November 19, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “horseguy6969″ and is located in Pipersville, Pennsylvania. This item can be shipped to United States.

For sale is 1 used Bridgeport milling machine. This machine is in over all very nice shape. It has a j head. The table is 9X48. It has a 12 inch knee. It is 3 phase 208/220/460 volts. It runs nice and quite. It has chrome ways. It has some backlash in the x and y. I never tried adjusting the nut. Im sure you can get most of it out. The handle on the left side of the longitudinal table was on a machine I had outside. It was rusty and I sandblasted it. It works perfect its just not polished. I took a picture of it for you to see. When we got the machine there was a prototrac type handle there. The high-low speed clutch control lever is not original. I took a picture of it as well. The table stop is missing. There are several war wounds on the table as you can see in the pictures. The key to align the collet is still there! This machine comes as you see in the pictures. No tooling, no collets, no hold downs and no vice. There is a drawbar. We have all kinds of fork lifts. If you have any questions at all please ask. The item “Bridgeport milling machine j head 3 phase 9 by 48 table 12 inch knee bridgeburg” is in sale since Thursday, November 05, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stinson1082″ and is located in Clinton, Massachusetts. This item can be shipped to United States.

• Brand: bridgeport
• Model: milling machine

Picked this up having the intent to complete and use it but never got around to it. It is a 10 inch base. Could use new knobs the top one is missing a piece. Does not have a spindle head. Comes just as seen in the pictures.The item “Sherline Mill (10 Inch Base)” is in sale since Tuesday, March 17, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “edwaedwtayl” and is located in Hebron, Maine. This item can be shipped to United States.

• Brand: Sherline

For sale: a set of one left hand side and one right hand side. Pins are 1 out to the left on one stop. And 1 out to the right on the other stop. If you are looking for a stop that gets as far away from the tool as possible and is below the top of the jaw, here it is. Low profile vise stops made from aluminum 6061 and fitted with stainless hardware.

This stop can be used from the left or right hand side. The pins are both set below the vise jaw. This lets you machine the edge of any part right down to the jaw. These are very useful in any kind of set up where you do not want to hit the stop itself with your tool. My job is to please my customers.

All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1 inch thick. The picures show a 6 inch kurt and a 4 inch kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware.

The item “SET OF 2 MACHINE SHOP VISE STOPS MILL (1 LEFT AND 1 RIGHT) 1 INCH LOW PROFILE” is in sale since Tuesday, March 04, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”.

Excellent diagonal hole pattern design for easy collet access. Holds one complete set the following sizes. 11 collets of the er-32. 15 collets of the er-16. 7 collets of the er-11. Dimensions are 1 5/16 h. With an inclination of 8 degrees. For easy identification of the collets. High impact plastic material, soap washable. It will support up to 20 lbs. Put it in flat surface or in your toolbox drawer due a shallow design will not exceed your drawer high. Protect your investment, this collet caddy will maintain your collets separated and clean. Conventional or cnc lathe, swiss, mill and multiple applications. Proudly made in the usa. Try it, we guarantee that you will be satisfied.

The item “ER-32 ER-16 ER-11 COLLET RACK MULTI -SET METRIC INCH” is in sale since Friday, February 12, 2010. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “sisanco” and is located in Burbank, California. This item can be shipped worldwide.

2 high feed face mill.

The seller is “turningconcepts” and is located in Matthews, North Carolina. This item can be shipped to United States.

• Country/Region of Manufacture: Germany
• Brand: Fette
• Model: DOC V09 2″ Z6 COPY FACE MILL
• MPN: 9089023

Up for sale is a used nichols horizontal production mill with a 8.5″ x 30″ table and power feed. I have not powered this machine at our current location but it was working when disconnected. I will guarantee it no to be doa. All offers will be considered! The item “NICHOLS HORIZONTAL MILL, 8.5 inch X 30 inch TABLE, POWER FEED PRODUCTION MILL” is in sale since Sunday, December 22, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipnsupplies510″ and is located in Laredo, Texas.