ANGLE HEAD with precision gears CW/CCW rotation, for CNC machines, FIXED 90 degree INCLUDING: Aluminum Housing V-FLANGE CAT 40 TAPER, A25CN-CAT40 C axis 360 degree adjustable positioning plate with locking pin Spindle ER25 Collet type, max. 625 capacity Preloaded bearing system 1 Collet ER25 max Capacity 16mm 5000 RPM max grease lubricated Max spindle thrust 102 lbs / 450 N. Max torque at 2000 RPM 180 Lb/in / 20 Nm. 1 Stop Block for 18 mm tapered pin with shim plate. Weight 9.9 lbs, anodizing color maybe also be yellow! CD with part list, setup PDF drawing and video and Wrench set. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Other Toolholding”. The seller is “sotechsales” and is located in this country: US. This item can be shipped to United States, Canada.

CNC 2 AXIS ANGLE HEAD ADJUSTABLE 180 degrees with precision gears , CW/CCW rotation INCLUDING: Aluminum Housing V-FLANGE CAT 50 TAPER. C axis 360 degree adjustable positioning plate with locking pin. A axis +/- 90 degrees. 1 Spindle ER25 Collet type, max. 629 capacity Preloaded bearing system Collet ER 25 max Capacity 16mm 4000 RPM max grease lubricated Max spindle thrust 215 Lbs. Max torque at 2000 RPM 139 LB/in. 1 Stop Block for 18 mm tapered pin with shim plate. Head weight 29 lbs. CD with PDF Drawing for set up and video, parts list and wrench set. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment”. The seller is “sotechsales” and is located in this country: US. This item can be shipped to United States, Canada.

• Model: T25-CAT50
• Modified Item: No
• Country/Region of Manufacture: Italy
• Machine Type: Machining Centers Vertical/Horizontal
• Model Year: 2021
• MPN: 124991.100
• Brand: SOTECH
• Control: tool changer, Manual

The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fansdealonline” and is located in this country: US. This item can be shipped to United States.

• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13\
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: Lifetime
• UPC: 0895800908447
• EAN: 0895800908447
• Brand: VEVOR
• Function: Milling
• Control: Manual
• Machine Type: Milling Machine
• Power Source: Electric
• Max Spindle Speed (RPM): 200 RPM
• Voltage: 110 V
• Model: AS-250
• MPN: ZCXUN00525

These mills are per order, you can request a quote for the options you require and we will return the amount for each order. It takes 3-4 weeks per order and can be ordered in sets of two’s if you desire. We have some stock machines that vary with options on board and will need to be priced per unit basis. We have been in business fore over 34 years and will offer a good solid option to vertical milling. Power Feeds, Digital Readouts, and many more options are additional cost and not included in this listing price. This listing price is base model no options. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tasironltd2012″ and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 3 hp
• Machine Type: Milling Machine
• Power Source: Electric
• Table Length: 42-60
• MPN: Series 1-2
• Spindle Taper: R8-QC30
• Z-Axis Travel Bed: 16\
• Table Width: 9
• Brand: Bridgeport
• X-Axis Travel Bed: 24-32
• Model Year: Varies
• Control: Manual
• Max Spindle Speed (RPM): 3800-4000
• Voltage: 220-480
• Model: 2J
• Y-Axis Travel Bed: 12

Pair of used Benchman VMC-5000 benchtop CNC milling machines for parts or repair. Both are 1997 vintage, serial numbers 047-41BA-0105 & 107-41BB-0244, with table-mounted tool changers for R-8 collets. Neither is in working order and not sure if either one is a complete unit. My original hope was to have enough parts to make one working machine but never put in much effort. I mostly worked on the controller (Acramatic 2100) for one of the units and was able to get a hard drive cloned onto a solid state memory card & booting with errors. These use a very old version of Windows NT (3.51). My recommendation would be to scrap the controllers completely and replace with a generic e. Centroid Acorn or all-in-one controller. There are some spare parts that may or may not work (servo motors, boards), a bunch of manuals, but no schematics. Drives are Litton/Clifton precision with Computer Optical Products Inc encoders and Copley Controls Model 412 drive controllers. Spindle motors are Eastern Air Devices BLDC 160V DC 1.0 HP listed for 7200rpm cont duty with Minarik controller. The item “Two used Benchman VMC 5000 benchtop CNC milling machines for parts or repair” is in sale since Saturday, December 25, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “salvagemeister” and is located in Ringoes, New Jersey. This item can’t be shipped, the buyer must pick up the item.

• Model: VMC 5000
• Spindle Horsepower: 1
• Machine Type: Milling Machine
• Table Length: 19.5
• Max Spindle Speed (RPM): 5000
• Model Year: 1997
• Power Source: Electric
• X-Axis Travel Bed: 12
• Y-Axis Travel Bed: 6
• Z-Axis Travel Bed: 9
• Spindle Taper: R-8
• Brand: Light Machines
• Table Width: 6.25
• Control: CNC
• Voltage: 115 V

This is a Portable Program Transfer Device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick) to or from the CNC control through the RS232 communications port, also referred to as Drip feed DNC or Up-Loading & Down-Loading. Extension of file name supports. ? Design characteristics & Features. LCD 2.4 inch, 65536 colors : display program content, File & Folder list, vibrant and visualization. Internal MEMORY 2Gb/4Gb/8Gb use to storge and manage NC programs. 02 ports of USB 2.0. Protocol RS232 & Parallel 50-pin. 04 magnet nuts to mounting on CNC machine. 06 buttons: RESET, FUNCTION, BACK, SET, UP, DOWN. Function COPY-PASTE, CUT-PASTE, RENAME, DELETE, NEW FOLDER: use to easy management files & folders on USB and MEMORY. Function AUTO CUTTING: it can cutting by Percent or Line Number. We can see program content after cutting. Function SEND Send program to CNC machine, monitoring program contant when sending. Function FORCED SEND Forced transfer a program to CNC machines without the required signal from CNC machines (Skip XON). Function RECEIVE Receive program / parameter from CNC machine. USB/MEMORY capacity monitoring; Format drive, etc. PACKAGE INCLUDES 1DNC + 1 CABLE + 1 ADAPTER. The item “TITAN DNC. DNC USB for CNC MACHINES. RS232 DNC. Titan dnc drip feed. Solution DNC” is in sale since Monday, January 25, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Supplies\Other Metalworking Supplies”. The seller is “bee.vn” and is located in HO CHI MINH CITY. This item can be shipped worldwide.

• Country/Region of Manufacture: Vietnam
• Item Type: dnc usb
• MPN: titan dnc drip feed
• Brand: DNC TITAN bee.vn store

2MT ER25 COLLET CHUCK. 2 MORSE TAPER SHANK COLLET CHUCK, TAKES ER25 COLLETS. SEE OUR OTHER 5500 ENGINEERING TOOLS. The item “RDGTOOLS 2MT ER25 COLLET CHUCK FOR MILLING MACHINES” is in sale since Monday, November 22, 2010. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Function: Milling
• Brand: RDGTools HBM Myford