Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch. Milling Machine Riser Block 4. For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter and can thread into the spider. The base diameter is 15 inch (380mm). The shoulder diameter is 12.48 (317mm). The inside diameter is 10 (255.9mm). The rectangular bolt pattern is 9 5/8″ x 6 3/4″. 2015-12-29 Application Note: Some customers with original Bridgeports installed the riser block without modification, however, a recent customer with 1960 Bridgeport Series 1 J-head reports that this riser block’s bolt pattern is correct, but the bore needs to be enlarged to accept the Bridgeport’s turret. In light of this information, please budget your time accordingly. We’ll keep this note updated as more information comes in. Please note: Actual paint color of the riser block MAY VARY from the photos. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch” is in sale since Thursday, April 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.

• Brand: EISEN
• MPN: S2-RB-4″
• Country/Region of Manufacture: Taiwan

BRAND NEW GENUINE ALIGN Z AXIS POWER FEED. Z Axis (Up/Down) Knee Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. These are very high quality units, made in Taiwan, Not China. These are very high quality, very durable and built for every day use. Spend a little more and it will work for many years to come. This unit is brand new in the box (The one in the picture was just opened up for display, you will receive one that is brand new in the box). GET IT FAST, THESE ARE IN STOCK! SHIPS SAME DAY IF ORDERED BY 2PM EASTERN STANDARD TIME! These will fit almost any vertical knee type mill out there, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more if you mill has the same mounting pattern. As long as it is the Bridgeport Type Machine, it should fit. (It will NOT fit mills with a different mounting pattern or different sized leadscrew like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport Type as mentioned above). These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. This set includes everything you should need to install this power feed, including the power feed unit, mounting bracket, drive gear, shims, safety stop with track, and hardware. If you have any questions about this unit at all, please feel free to ask. The item “ALIGN TAIWAN Z AXIS POWER FEED KNEE MILLS BRIDGEPORT & OTHER MILLING MACHINE” is in sale since Thursday, March 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Non-Domestic Product: No
• Model: ALIGN-500P-Z
• Modified Item: No
• Country/Region of Manufacture: Taiwan
• Custom Bundle: No
• MPN: ALIGN-500P-Z
• Brand: Align

Milling Machine Riser Block 6 for Bridgeport-Type Knee Mills 6inch. 6 Milling Machine Riser Block. For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter and can thread into the spider. Please check drawing for dimensions. The base diameter is 15 inch (380mm). The shoulder diameter is 12.48 (317mm). The inside diameter is 10 (255.9mm). The rectangular bolt pattern is 9 5/8″ x 6 3/4″. Please note: Actual paint color of the riser block MAY VARY from the photos. 2015-12-29 Application Note: Some customers with original Bridgeports installed the riser block without modification, however, a recent customer with 1960 Bridgeport Series 1 J-head reports that this riser block’s bolt pattern is correct, but the bore needs to be enlarged to accept the Bridgeport’s turret. In light of this information, please budget your time accordingly. We’ll keep this note updated as more information comes in. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “Milling Machine Riser Block 6 for Bridgeport-Type Knee Mills 6inch” is in sale since Friday, April 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.

• Brand: FLAIR
• MPN: S2-RB-6″
• Country/Region of Manufacture: Taiwan

X-Horiz Tvl of Table. Y-Vert Tvl of Head. Available for inspection under power at. 2600 East Saucon Valley Road; Center Valley, Pa 18034. The item “TOS VARNSDORF WH 63 Horizontal Table Type Boring Mills” is in sale since Wednesday, March 29, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “altamachinetools4u” and is located in Center Valley, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Brand: Tos Varsdorf
• MPN: Does Not Apply

BRAND NEW GENUINE ALIGN X AXIS POWER FEED. X Axis (Left/Right Table Travel) Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. These are very high quality units, made in Taiwan, Not China. These are very high quality, very durable and built for every day use. Spend a little more and it will work for many years to come. This unit is brand new in the box (The one in the picture was just opened up for display, you will receive one that is brand new in the box). GET IT FAST, THESE ARE IN STOCK! SHIPS SAME DAY IF ORDERED BY 2PM EASTERN STANDARD TIME! These will fit almost any vertical knee type mill out there, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more if you mill has the same mounting pattern and a 5/8 Diameter shaft on the end. As long as it is the Bridgeport Type Machine, it should fit. (It will NOT fit mills with a different mounting pattern or different sized leadscrew like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport Type as mentioned above). These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. This set includes everything you should need to install this power feed, including the power feed unit, mounting bracket, drive gear, shims, safety stop with track, and hardware. If you have any questions about this unit at all, please feel free to ask. The item “ALIGN TAIWAN X AXIS POWER FEED KNEE MILLS BRIDGEPORT & OTHER MILLING MACHINE” is in sale since Wednesday, February 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Model: ALIGN-500P-X
• Modified Item: No
• Country/Region of Manufacture: Taiwan
• Custom Bundle: No
• MPN: ALIGN-500P-X
• Brand: Align
• Non-Domestic Product: No

Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. AS-250-150 X-Axis Power Feed for Milling Machine X 1. Set of Necessary Accessories X 1. Product Manual X 1. All items are dispatched from our warehouse in Azusa, CA. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “AS-250 X AXIS POWER FEED KNEE MILLS FOR BRIDGEPORT MILLING MACHINE 0-200 RPM” is in sale since Saturday, March 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “ac-racing” and is located in Hacienda Heights, California. This item can be shipped to United States.

• Brand: AC-RACING
• Model: AS-250
• MPN: ZY8LX00361
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″

Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch. Milling Machine Riser Block 4. For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter and can thread into the spider. The base diameter is 15 inch (380mm). The shoulder diameter is 12.48 (317mm). The inside diameter is 10 (255.9mm). The rectangular bolt pattern is 9 5/8″ x 6 3/4″. 2015-12-29 Application Note: Some customers with original Bridgeports installed the riser block without modification, however, a recent customer with 1960 Bridgeport Series 1 J-head reports that this riser block’s bolt pattern is correct, but the bore needs to be enlarged to accept the Bridgeport’s turret. In light of this information, please budget your time accordingly. We’ll keep this note updated as more information comes in. Please note: Actual paint color of the riser block MAY VARY from the photos. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch” is in sale since Wednesday, December 26, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.

• Brand: EISEN
• MPN: S2-RB-4″
• Country/Region of Manufacture: Taiwan

2013 DMG Mori Seki 1035V Vertical. Is in good working condition. Is another fantastic offering of ALI’s CNC machine tools. And used machine tools for sale. 2013 DMG Mori Seiki 1035V Vertical Machining Center. Table Size: 47.2″ x 22″. Max Table Load: 2,200 Lbs. X Axis Travel: 40. Y Axis Travel: 22. Z Axis Travel: 20. Spindle Nose to Table Top: 4.7″ – 24.8″. Spindle Speed: 12,000 RPM. Spindle Motor: 15/11 HP. Rapid Traverse Rates: 1,200 IPM. Cutting Feed Rates: 590 IPM. Tool Capacity: 30 Side Mount. Machine Weight: 9,400 Lbs. Machine Dimensions: 98″L x 99″W x 106H. Coolant Tank & Pump. ALL BUYERS PLEASE READ. Asset Liquidity International, Inc. Has specialized in Asset remarketing of Repossessed and End-of-Lease Bank-Owned equipment in North America. All sales are final. All information stated is to the best of our knowledge. These may be inconclusive or incomplete and not guaranteed. Please, read the description carefully and if some info is missing or unclear, please, contact me with any questions prior to making an offer. Please contact me at your convenience with any questions before the sale. The item “2013 DMG Mori Seki 1035V Vertical Mills CNC (ALI#403234)” is in sale since Monday, June 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “assetliquidityintl” and is located in Western Region . This item can’t be shipped, the buyer must pick up the item.

HERG Automatic Lube Pump Oiler. Brand new HERG gear type automatic pump. 1 – 3 cc per cycle; 15 minute rest time. Low level alarm; 2 liter capacity. 4mm output, chained fill cap with filter. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. For all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “HERG Automatic Lube Pump Oiler 110v for Bridgeport Knee Mills” is in sale since Tuesday, August 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Largo, Florida. This item can be shipped worldwide.

• Model: TM-315A
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Country of Manufacture: United States
• MPN: TM-315A
• Brand: HERG
• Non-Domestic Product: No

Bridgeport M Head from a milling machine. This sale is for the head only, The’swivel’ or’knuckle’ is not included. Like in the last photo with all the’black’ on it. Quill is 7 B&S Brown and Sharpe. US Motor, 220 volt, ½ HP, 3-phase. SN 519610, 1200 rpm I ran this motor off a rotary phase converter and not a static phase converter. A little damage to the casting where the oilier screws in. This does not in any way impact the operation, but I want to provide full disclosure to all known flaws. Comes with the following items. Collet set (All of them are 7 B&S taper). 3/8 Cant read anything on it but looks like Bridgeport brand. I have no idea why a 21/64. 7/16 Unknown modern brand (probably Chinese). A ½ shank is tight, and a 31/64″ drill is a little loose – I think it is 1/2″ Bridgeport brand… But I cannot be certain. Jacobs brand drill chuck arbor 7 B&S to 3JT (Jacobs Taper). Jacobs brand drill chuck arbor 7 B&S to 6 JT (Jacobs Taper). Three (3) National Twist Drill and Tool Company Left Hand cut (LH) 6 flute 7/8 HSS endmills (non center cutting) Length of flute is about 1.470. One (1) National Twist Drill and Tool Company Left Hand cut (LH) 6 flute 7/8 HSS endmills (non center cutting) Length of flute is about 1.130. This one has had the end portion of the flutes cut or ground of f. Local pick-up is free. My height weight and dimensions are an estimate. I will crate, I will bring it to the depot and get it going on my end. I will crate and bring to the depot for free. Here’s a video of the head running. The item “Bridgeport Milling Machine M Head with Collets, Arbors, End Mills 1/2hp 3ph 220v” is in sale since Tuesday, January 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “yaker” and is located in Rocky Mount, Virginia. This item can be shipped to United States.

• Brand: Bridgeport
• Model: M Head
• Country/Region of Manufacture: United States

Recent searches

• bridgeport m head