VERTICAL SLIDE VICE FOR LARGE MYFORD VERTICAL SLIDES. This machine vice has a capacity of 2″, and the jaws are 2″ wide. A’V’ has been cut into the moving jaw for holding round work. To suit the large plain and double swivel vertical slides. Comes supplied with 4 tee bolts for fixing to your vertical slide. Please note, the vertical slide in the picture is for illustration purposes only, and is not for sale on this listing. Direct from Myford ltd. At any time during shop hours. The item “VERTICAL SLIDE VICE FOR LARGE MYFORD VERTICAL SLIDES Direct from Myford Ltd” is in sale since Monday, March 23, 2015. This item is in the category “Business, Office & Industrial\Hand Tools\Vices”. The seller is “myford_ltd” and is located in Mytholmroyd, West Yorkshire. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: myford

2 BORING HEAD ON 2MT MORSE TAPER. ON DIAMETER PER DIVISION. PLUS 9 PIECE 1/2 BORING BAR SET. THIS QUALITY ONLY AVAILABLE FROM RDGTOOLS. SEE OUR OTHER 6000 OTHER ENGINEERING TOOLS. The item “RDGTOOLS 2MT BORING HEAD KIT / IMPERIAL 2 DIAMETER WITH 9PC TOOLS MYFORD” is in sale since Friday, March 23, 2012. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded/Generic

Stop start switch 3 phase. New switch suitable for milling machines / lathes etc. The item is new and un used it has been stored in the warehouse for quite some time. Please note we have no cable diagrams or electrical plans with this control box. Direct From Myford Ltd. At any time during shop hours. The item “Stop / start switch 3 phase milling machine lathe direct from Myford ltd” is in sale since Wednesday, May 21, 2014. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “myford_ltd” and is located in Mytholmroyd, West Yorkshire. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: myford

BORING TABLE 168MM SQUARE AND 25MM THICK. 4 MYFORD SIZE SLOTS. PLEASE NOTE THAT THIS IS THE LAST OF STOCK AVAILABLE AND THEY MAY HAVE SOME SURFACE RUST ON THEM, PLEASE KEEP IN MIND WHEN PURCHASING. SEE OUR OTHER 7000 ENGINEERING TOOLS. The item “MYFORD BORING TABLE SUPER 7 ML7 ML10 168MM SQUARE TEE SLOTTED PLATE” is in sale since Friday, January 14, 2011. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in HEBDEN BRIDGE WEST YORKSHIRE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford
• Featured Refinements: Myford ML10

2MT ER32 COLLET SET 18PC / LATEST QUALITY COMPLETE SET. THIS QUALITY AND PRICE ONLY FROM RDGTOOLS. 18PC COLLETS COVERING ALL SIZES 2-20MM. THESE COLLETS ALLOW HOLDING OF. STRAIGHT SHANK SLOT / END MILLS. DRILLS REAMERS, SPOT FACERS, ECT. PLUS 2MT ER32 COLLET CHUCK WITH SPANNER. OUR GRADE WE FEEL OFFERS BOTH GOOD QUALITY AND VALUE. CHUCK, SPANNER AND 18PC COLLET SET SET IS STORED AND DISPLAYED IN QUALITY. SEE OUR OTHER COLLET COMBINATIONS. The item “RDGTOOLS 18PC ER32 COLLET SET 2MT COLLET CHUCK MYFORD SET ALL IN ONE BOX” is in sale since Tuesday, September 3, 2013. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

DIGITAL READ OUT AND LINEAR SCALES. WE HAVE FOR SALE EITHER A 2 AXIS DRO (DIGITAL READ OUT) AND A 3 AXIS DRO. THE DRO HAS ALL FUNCTIONS AND CALCULATIONS NEEDED FOR PRECISION MILLING, GRINDING. AN EXCELLENT ADDITION TO YOUR MACHINE. LINEAR SCALES AVAILABLE 100MM, 150MM, 200MM, 250MM, 300MM, 350MM, 400MM, 450MM, 500MM. SCALES COME COMPLETE WITH FIXING BOLTS AND INSTRUCTIONS. The item “RDGTOOLS DIGITAL READ OUT DRO 2 AXIS 3 AXIS LINEAR SCALES UPTO 650MM MYFORD” is in sale since Wednesday, August 30, 2017. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: Unbranded/Generic

4 WAY TOOLPOST TO FIT A MYFORD LATHE. THIS 4 WAY TOOLPOST WILL FIT STRAIGHT ONTO A MYFORD LATHE. CAN TAKE UP TO 8mm TURNING / BORING TOOLS. COMES WITH 8 THREADED BOLTS. THE BOTTOM PLATE MEASURES 6.3MM THICK. PLEASE NOTE, THIS IS NOT THE INDEXING TYPE – IT HAS A FLAT BOTTOM. The item “RDGTOOLS 4 WAY TOOLPOST TO FIT A MYFORD LATHE” is in sale since Friday, March 30, 2012. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in HEBDEN BRIDGE WEST YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

MYFORD COLLET CHUCK WITH ER32 COLLET SET. ER32 COLLET CHUCK WITH BUILT IN MYFORD THREAD. THIS IS A 2PC HEAD SYSTEM. THIS SYSTEM IS DESIGNED TO CREATE THE BEST ACCURACY AVAILABLE ON YOUR MACHINE! 1CLEAN ALL PARTS. 2 FIT THE BACKPLATE TO THE MACHINE. 3ROUGH TURN THE REGISTER. 4 SKIM FACE AND BLEND WITH THE DIAMETER. 5 FINISH THE REGISTER. 6 OFFER UP THE ADAPTOR AND SKIM MORE IF NEEDED. 7 CLEAN THE ADAPTOR AND SECURE WITHTHE 3 SCREWS BUT DO NOT TIGHTEN. 8USE A DTI ON THE TAPER TO CHECK THE ACCURACY. 9 IF REQUIRED TAP DOWN THE HIGH POINT AND RE CHECK. 10 TIGHTEN THE SCREWS. AND FULL 18PC ER32 COLLET SET RANGE 2-20MM AND IMPERIAL EQUIVALENT. THE COLLETS ARE SUPPLIED IN FITTED ALUMINIUM BOX, THE CHUCK COMES IN PLASTIC TUBE. THIS COLLET SET WILL HOLD THREADED AND STRAIGHT SHANK ENDMILLS / DRILL BITS ETC. The item “RDGTOOLS MYFORD ER32 COLLET CHUCK WITH 18PC ER 32 COLLETS 2MM TO 20MM SUPER 7″ is in sale since Thursday, November 18, 2010. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

HEADSTOCK DIVIDING ATTACHMENT FOR BIG BORE SERIES 7 LATHES. THIS ATTACHMENT IS TO BE USED IN CONJUNCTION WITH YOUR EXISTING MYFORD DIVIDING ATTACHMENT. PLEASE NOTE – THE DIVIDING ATTACHMENT AND LATHE IN THE PICTURE ARE FOR ILLUSTRATION PURPOSES ONLY, TO SHOW HOW THIS FITS ON TO YOUR HEADSTOCK. USING THIS ATTACHMENT, YOU WILL BE ABLE TO USE THE DIVIDING ATTACHMENT ON YOUR HEADSTOCK, RATHER THAN BY USING A VERTICAL SLIDE. IT HAS BEEN DESIGNED TO SUIT LATHES WITH A QUICK CHANGE GEARBOX, ALTHOUGH IT CAN EASILY BE ADAPTED TO SUIT NON-GEARBOX MACHINES. THIS PARTICULAR LISTING IS TO SUIT SUPER 7 LATHES WITH SPINDLE NOSE THREADED M42.5 x 2mm PITCH (SPINDLE BORED 1). YOU WILL NOT NEED TO PERFORM ANY MACHINING ON YOUR DIVIDING ATTACHMENT, OR ALTER YOUR LATHE IN ANY WAY TO FIT THIS PART. ALL YOU WILL NEED TO DO IS REMOVE SOME PARTS THAT ARE ALREADY ON YOUR DIVIDING ATTACHMENT, REPLACE THEM WITH THESE PARTS, AND FIT THEM TO YOUR LATHE. THIS HAS A VERY RIGID CONSTRUCTION WITH NO BACKLASH. IT WILL ALLOW YOU TO DIVIDE BY TURNING THE SPINDLE RATHER THAN THE WORK, MAKING IT A VERY USEFUL ATTACHMENT FOR GENERAL GEAR CUTTING AND DIVISION, AND IT CAN BE OF USE IN HOROLOGY. The item “NEW MYFORD ATTACHMENT FOR HEADSTOCK DIVIDING IN BIG BORE SERIES 7 LATHES” is in sale since Wednesday, March 4, 2015. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “myford_ltd” and is located in Mytholmroyd, West Yorkshire. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: myford
• Sub-Type: Lathe
• Joiners & Lathes: Lathe

RDGTOOLS 6PC SET OF QUALITY MICROMETERS 0-6. BOXED MICROMETER SET 0-6. 0-1″, 1-2″, 2-3″, 3-4″, 4-5″, 5-6″. ALL IN 0.001 INCREMENTS. COMES COMPLETE WITH SETTING ANVILS AND ADJUSTMENT KEYS. FITTED IN STRONG FITTED STORAGE BOX. ALL FITTED WITH CARBIDE ANVILS. The item “RDGTOOLS 6PC MICROMETER SET 0-6 MYFORD LATHE METRIC ENGINEERING MEASURING” is in sale since Tuesday, January 29, 2013. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford