Offset Tailstock w/ live center, Dead Center. For Taper Turning, MT1, MT2 & MT3 Shanks. Offset Tailstock New Style. Plastic Case w/ Padding. PRECISE TAPER TURNING ATTACHMENT. GIVES YOU THE FREEDOM FROM OLD TRADITIONAL METHOD OF OFF-SETTING THE TAILSTOCK OF YOUR LATHE, WHEN YOU WANTED TO DO THE METAL TURNING IN A TAPER PROFILE. THIS ATTACHMENT HAS A MUCH BETTER CONTROL, PRECISION AND QUALITY. SLIDE CAN BE SHIFTED 25 MM LEFT & RIGHT. Please note that the 1 handle rotation will off set the attachment by 1 mm. It has a double bearing live revolving center on the front to hold the workpiece from center. The revolving center point is hardened & precisely ground. Made from quality tool steel, this attachment makes the taper turning operation much easier than before and gives you the freedom of old school method of off setting the tailstock for turning taper profile on lathe machine. The attachment’s slide is provided with a brass gib for fine movement and adjustment & locking through the slide’s screws & bolts. Shanks are precisely ground.

Made in the USA by Volstro Manufacturing. This is a Rotary Offset Milling Head Attachment w/ R8 Shank. Includes Accessories and Case. Collet Sizes Included: 4-3mm, 5-4mm, 7-6mm, 8-7mm, 10-9mm, 12-11mm, 13-12mm. Head Rotation: 360 degrees. Mounting Collar Diameter: 3-3/8. Overall Dimensions: 10-1/2″ x 5-3/4″ x 10-1/2 high. Case Dimensions: 13″ x 13″ x 8 high. Comes exactly as shown in pictures.

Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Protected by one or more US patents.

KF Products offset milling attachment for vertical milling machines.

Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Protected by one or more US patents. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in this country: US. This item can be shipped to United States.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill
• Brand: Edge Technology
• UPC: 738435265885

New Edge model: 04-000 with the 1 dia face. Nice tool, ordered multiply by mistake. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “old-stf-cycle” and is located in this country: US. This item can be shipped to United States.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill
• Brand: Edge Technology
• UPC: 738435265885

Pro Touch Off Gage (Model: 04-000). Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 in easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Pro Touch Off Gage. Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Protected by one or more US patents. Please request a package invoice before you pay. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Touch Off Gage z axis CNC tool length offset setter (1 contact face) #04″ is in sale since Friday, February 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion, Montserrat, Ukraine.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Brand: Edge Technology
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill

Volstro Rotary Offset Milling Attachment For Bridgeport Milling Machines Includes 7 Original Collets, Wrenches, & All Accessories Pictured R8 Shank Mounts to Any Milling Machine with a 3-3/8 Diameter Quill Includes Manual. Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Powered by SixBit’s eCommerce Solution. The item “NICE VOLSTRO ROTARY OFFSET MILLING ATTACHEMENT FOR BRIDGEPORT + ACCESSORIES” is in sale since Friday, December 30, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stm_surplus” and is located in Ellington, New York. This item can be shipped worldwide.

• Brand: Volstro
• MPN: Does Not Apply

Criterion TABH-250 Micro Adjust Boring Head. 1/2 Boring Tool Capacity. 1-1/2-18 Threaded Mount in Tool Body. Check my other auctions for mor. E quality tools and machinery. If you are waiting for more auctions to end- just let us know. The item “CRITERION TABH-250 2-1/2 TENTH SET OFFSET BORING HEAD With R8 SHANK MICRO ADJUST” is in sale since Friday, September 11, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stm_surplus” and is located in Ellington, New York. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.