Item include: 1AL-310 power feed for X axis milling machine. It includes accessories for installion. The shaft is 16mm for mounting. Milling machine power feeding apparatus with low noise, large torque, high speed, convenient installation and flexible operation, good appearance, as to meet the requirements of ergonomics. It’ll just take you 1 minute. We will work with you to solve any problems. The item “Best price ALSGS AL-310 110V 220V Power feed for Vertical milling machine X axis” is in sale since Thursday, August 9, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “88490755″ and is located in China. This item can be shipped worldwide.

• Application: For milling x axis
• Model: AL-310 for x axis milling
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• MPN: No have
• Brand: ALSGS
• Non-Domestic Product: No
• Voltage: 110V / 220V

NO STAND IS INCLUDED IN THIS LISTING. Heavier Class Milling Machine, (1100 LBS With Base) For More Rigidity, And Greater Cutting Ability. Larger Knee Mill Style Table Handles, for Much Better Control By Hand. True Inch Pitch Leadscrews on X and Y Axis, 10 TPI Screws. 100 Per Turn For Easier Operation. Available With Power Down Feed on Spindle (PDF Model Only) For Boring Operations. Optional Stand is Heavy Duty Cast Iron, For Better Vibration Dampening and Rigidity. Table Size: 9×31.5. Table Load Capacity: 300 lbs. Table T-Slot Size and Number: 14mm / 9/16, 3 Slots. Table Travel, X Axis: 22-3/8 Hand Only, 19.5 w/ Power Feed. Table Surface Height from floor, 34-3/4 (With base flat on floor). Base Dimension at floor approx. Bolt Mounting Pattern, Milling Machine Base (Where the machine would bolt to either a work bench or to the cast iron base) Approx. 12-3/4 Wide x 18-3/4 Deep, 9/16 Hole Diameter. Cross Travel, Y Axis: 8. Head Vertical Travel: 17. Distance Spindle to Table: 18. Quill (Spindle) Travel: 5. Lead Screw Type: Inch Pitch Acme Threads. Spindle Taper: R-8, with 7/16-20 drawbar thread U. Head Tilt Front to Back: N/A. Head Swivel: Side To Side, 90 Degrees. Power: 220 Volt, Single Phase, 9 Amps. Motor Horsepower: 1.5 H. (Some other similar machines will say that they are 2HP, but its the SAME exact motor as this one, just rounded up to 2hp and marked that way, we prefer to be honest and mark it as what it really is, which is 1.5HP, which is more than enough power for this machine either way). Casting Type: Fine Grain Cast Iron. Approximate Weight: 850 Without Stand. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-932M-PDF VERTICAL MILLING MACHINE POWER DOWN FEED NO STAND FREE SHIPPING” is in sale since Monday, April 8, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Non-Domestic Product: No
• Modified Item: No
• Custom Bundle: No
• MPN: PM-932M-PDF with CHIP TRAY
• Brand: Precision Matthews

Product parameters – Name: electronic power feed, electronic feeders – Model: ALB-310SX (Horizontal) – Main motor power: 95w – Speed range: 0-200 – Maximum speed: 200RPM – Maximum torque: 450in-lb – Power Requirements: AC110V / AC220V, 50 / 60HZ (optional) – Applicable models: vertical turret milling machines, drilling and milling machine, other machinery. Milling machine power feeding easy to install with low noise, large torque, high speed, convenient installation and flexible operation, good appearance, as to meet the requirements of ergonomics. We plug is three categories: US plug, UK plug, European plug. Our product is the default US plug. Please do tell us the needed voltage and the Plug type when you place order Package Content: 1 x ALB-310SX X-Axis Power feed Milling drill Machine 200RPM 450in-lb 110V / 220V (as picture). Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “ALSGS 110V Power Feed for Vertical Milling Machine X Y Axis AL-310SX US” is in sale since Wednesday, March 28, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “buyfromtzt” and is located in California. This item can be shipped to United States, Canada, Mexico.

• Non-Domestic Product: No
• Bundle Listing: No
• Modified Item: No
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Brand: Unbranded/Generic

Heavier Class Milling Machine, (1100 LBS With Base) For More Rigidity, And Greater Cutting Ability. Larger Knee Mill Style Table Handles, for Much Better Control By Hand. True Inch Pitch Leadscrews on X and Y Axis, 10 TPI Screws. 100 Per Turn For Easier Operation. Available With Power Down Feed on Spindle (PDF Model Only) For Boring Operations. Optional Stand is Heavy Duty Cast Iron, For Better Vibration Dampening and Rigidity. Table Size: 9×31.5. Table Load Capacity: 300 lbs. Table T-Slot Size and Number: 14mm / 9/16, 3 Slots. Table Travel, X Axis: 22-3/8 Hand Only, 19.5 w/ Power Feed. Table Surface Height from floor, 34-3/4 (With base flat on floor). Base Dimension at floor approx. Bolt Mounting Pattern, Milling Machine Base (Where the machine would bolt to either a work bench or to the cast iron base) Approx. 12-3/4 Wide x 18-3/4 Deep, 9/16 Hole Diameter. Normal Working Max Height: (top of column travel motor) 76-1/2 (with optional stand). Height with head all the way up: (top of main motor) 81-1/2(with optional stand). Stand (Base) height, to machine mounting surface: 24. Cross Travel, Y Axis: 8. Head Vertical Travel: 17. Distance Spindle to Table: 18. Quill (Spindle) Travel: 5. Lead Screw Type: Inch Pitch Acme Threads. Spindle Taper: R-8, with 7/16-20 drawbar thread U. Head Tilt Front to Back: N/A. Head Swivel: Side To Side, 90 Degrees. Power: 220 Volt, Single Phase, 9 Amps. Motor Horsepower: 1.5 H. (Some other similar machines will say that they are 2HP, but its the SAME exact motor as this one, just rounded up to 2hp and marked that way, we prefer to be honest and mark it as what it really is, which is 1.5HP, which is more than enough power for this machine either way). Casting Type: Fine Grain Cast Iron. Approximate Weight: 1100lbs with Stand, 850 Without Stand. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-932M-PDF VERTICAL MILLING MACHINE POWER DOWN FEEDWITH STAND FREE SHIPPING” is in sale since Thursday, April 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-932M-PDF with STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: China

BRAND NEW GENUINE ALIGN Z AXIS POWER FEED. Z Axis (Up/Down) Knee Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. These are very high quality units, made in Taiwan, Not China. These are very high quality, very durable and built for every day use. Spend a little more and it will work for many years to come. This unit is brand new in the box (The one in the picture was just opened up for display, you will receive one that is brand new in the box). GET IT FAST, THESE ARE IN STOCK! SHIPS SAME DAY IF ORDERED BY 2PM EASTERN STANDARD TIME! These will fit almost any vertical knee type mill out there, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more if you mill has the same mounting pattern. As long as it is the Bridgeport Type Machine, it should fit. (It will NOT fit mills with a different mounting pattern or different sized leadscrew like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport Type as mentioned above). These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. This set includes everything you should need to install this power feed, including the power feed unit, mounting bracket, drive gear, shims, safety stop with track, and hardware. If you have any questions about this unit at all, please feel free to ask. The item “ALIGN TAIWAN Z AXIS POWER FEED KNEE MILLS BRIDGEPORT & OTHER MILLING MACHINE” is in sale since Thursday, March 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Non-Domestic Product: No
• Model: ALIGN-500P-Z
• Modified Item: No
• Country/Region of Manufacture: Taiwan
• Custom Bundle: No
• MPN: ALIGN-500P-Z
• Brand: Align

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. AS-250-150 X-Axis Power Feed for Milling Machine. Set of Necessary Accessories. If you have a problem with the product. We will require a picture of the damaged part for verification. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. The item “Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM” is in sale since Saturday, March 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “zbondfactory-1″ and is located in Hacienda Heights, California. This item can be shipped to United States.

• Brand: ZBOND
• Model: AS-250
• MPN: ZY8LX00361
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″

Maxi Torque Rite Power Draw Bar – Authorized Distributor – Proudly Made in the USA. Maxi torque rite drawbar Tech Data and Quantity Specials. SEE OTHER MAXI TORQUE MODELS FOR SALE SPECIFY MODEL & SPINDLE TYPE. Maxi Torque Rite Air Power Draw Bar For Manual & CNC Milling Machines. TR100-DB Automatic Drawbar complete system (shown above). Maxi Torque Rite Air Power Draw Bar is a Air Powered Drawbar Pneumatically Operated. TR100-DBxxx Automatic Drawbar complete system. Fits Bridgeport Sharp-Kent -Acer Manual Milling Machines WITH R-8 SPINDLE. SELECT 2 & 3 Axis BRIDGEPORT CNC Milling Mills. Saves Labor Time in Tool Changeovers. Improves work Holding Accuracy and Repeatability. Ergonomically Designed for Ease of Operator Repetitive Usage! Factory Trained Full Support and Service with Local Stocked Parts Availability and Interchangeability. COMPARE OUR 100% USA MADE with Our Superior Quality, performance, manufacturing features and LOW COST. Maxi Torque Rite Air Power Draw Bar. The item “MAXI TORQUE AIR POWER DRAWBAR KIT TR100-DB100 BRIDGEPORT USA Mill Vari-Speed R8″ is in sale since Saturday, January 26, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “machinery4less” and is located in Greeneville, Tennessee. This item can be shipped to United States, Canada.

• Model: TR100-DB100
• Country/Region of Manufacture: United States
• MPN: TR100-DB100
• Brand: MAXI TORQUE

X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS Mill Fit” is in sale since Friday, January 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “supply2worldwide” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico.

• Brand: Vevor Au coup
• MPN: ZCXUN00525
• Model: AS-250-150
• Country/Region of Manufacture: CHINA
• RPM: 0~200
• TORQUE: 150LBS
• Type: X-axis
• VOLTAGE: 110 V, 60 Hz
• Gross weight: 6.5 kg(14.3 lb)

A Class APF-750Z, Z Axis Power feed. 100% Made in Taiwan. Can fit Acer, Bridgeport, and most Taiwanese import mills. Add an auto power table feed to your milling machine for a simple and inexpensive way to increase user productivity on any conventional milling machine. “Aclass” powerfeeds feature next-generation design that boasts a number of improvements. Clutch device, direction changes are noiseless and effortless to operate. If tool crashes into workpiece or if there’s abrupt change in direction, the powerfeed has. Safety feature to protect the transmission gear and electronic components. Rapid traverse button is built right on top of the direction switch. The ergonomic design reduces fatique and stress. Jog function can be operated at any feed speed, so workpeice can be moved into position easily. On the table limit switchs are coolant proof, oil proof and protected from dust. Zero point repositionings repeatable within 0.05mm (0.00019) at the same speed. The powerfeed uses spiral bevel gear to transfer power to leadscrew for low noise operation and long operating life. Excellent speed control across the entire range. When cutting, speed variation is very low for better surface finishes. On the other hand, at low speed traverse, the power table feed won’t vibrate or strain. The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. 107T for plastic transmission gear and 6T for motor shaft gear 107 is not divisible by 6, 107 % 6 = 17.8333333333… The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Maximum Torque Using new patent Electron-Magnetic Clutch Devise for quiet operation and easy maintenance. Rapid Feed switch designed with the Direction Control Knob for easy and rapid operation. JOG Function working with any speed for operator easily find the machined point of working piece. X or Y axis. 110V / 2.8amp. X, Y or Z axis. 110V / 3.0amp. 110V / 3.4amp. Fullerton Office 2320 E Valencia Dr Fullerton, CA 92831. Piscataway Office 244 N. Randolphville Road Piscataway, NJ 08854. 2320 E Valencia Dr Fullerton, CA 92831. Note: Weight restrictions may apply in some cases. Orders under 150 lbs. Orders above 150 lbs. We guarantee the items are exactly as said in description. Thank you for viewing. Supra Machine Tool appreciates your business very much. Supra Machine Tool E-bay Store. For a wide selection of parts for milling machine, machining center, surface grinder, and engine lathes. The free listing tool. The item “Milling Machine Part- Z Axis Power feed fits Bridgeport- A Class APF-750Z” is in sale since Wednesday, January 20, 2016. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “supramachinetool” and is located in Fullerton, California. This item can be shipped worldwide.

• Brand: A Class
• Country/Region of Manufacture: Taiwan
• MPN: APF-750Z

Complete Power Drawbar Kit for Trak K3 Knee Mill. Packages available for other makes and models. Thank you for looking. All sales are final. The item “Maxi Torque-Rite Power Drawbar Kit Trak, Prototrak, SWI K3 Knee Mill R8 Spindle” is in sale since Thursday, March 1, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “ezbayestore” and is located in Cicero, New York. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• MPN: TR100-DB182
• Brand: MAXI TORQUE-RITE