With Electric Motor for Head Positioning, No more cranking the head up and down by hand! And X Axis Table Power Feed Included – BE SURE TO NOTICE THESE WHEN YOU COMPARE, OTHERS DO NOT HAVE THESE FEATURES. THIS LISTING COMES WITH A SHEET METAL CHIP TRAY BUT THERE IS NO STAND. IF YOU ARE LOOKING FOR A STAND PLEASE SEE OUR OTHER LISTINGS. Here are some features of this milling machine. Quill Depth DRO, R8 Spindle Taper. Different packages available to meet user’s. Class 5 high precision spindle bearings. Generous table size and travel in a compact machine. Solid Dovetail Way Column for high rigidity and precise up and down. Easy speed changes, no need to open any covers and change belts. Just stop, flip a lever, and go. Very Solid cast iron head and body make deeper cuts no problem. Head tilts 90 degrees left and right for angled cutting. Oil Filled gearbox in head for long life. Ears in head for long life. Adjustable tapered gibs and backlash to keep the machine tight and. So with this machine, you will receive. Z Axis / Head Electric Motor for head positioning. X Axis Table Power Feed. Quill DRO is built in. Sheet Metal Chip Tray (NO STAND IN THIS LISTING). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table T-Slot Size and Number. Table Travel, X Axis. Normal Working Max Height: (top of column travel motor). Height with head all the way up: (top of main motor) 57-1/2. Cross Travel, Y Axis. Distance Spindle to Table. With 7/16-20 drawbar thread U. Side To Side, 90 Degrees. Some other similar machines will say. That they are 2HP, but its the SAME exact motor as this one, just rounded. Up to 2hp and marked that way, we prefer to be honest and mark it as. What it really is, which is 1.5HP. More than enough power for. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL MILLING MACHINE R8 SPINDLE X-AXIS POWER FEED 3YR WARRANTY” is in sale since Wednesday, November 15, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Make: Precision Matthews
• Model: PM-932M & PM-932M-CHIPTRAY
• Type: Manual, Vertical
• Model Year: 2017
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5

X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM” is in sale since Thursday, August 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rumei-shopping” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Australia.

• Brand: VEVOR
• MPN: ZCXZG0085
• Bundle Listing: Yes
• Model: AS-250-150
• Country/Region of Manufacture: CHINA
• RPM: 0~200
• TORQUE: 150LBS
• Type: X-axis
• VOLTAGE: 110 V, 60 Hz
• Gross weight: 6.5 kg(14.3 lb

This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power drawbar will fit Bridgeport and most other import. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, and believe me its more than enough pressure to do the job. You will LOVE this product! Please note: This will not fit the Bridgeport J head machines, see my other listings for J head power drawbars…… There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine.. If this product will fit your mill. If your holes do not line up, this product can still work if YOU are willing to locate, drill and tap 2 mounting holes. Measure and be sure, thanks…… The item “Power Draw Bar for Bridgeport & Import mills” is in sale since Wednesday, July 23, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped to United States.

• Brand: n/a
• MPN: Does Not Apply

Bridgeport Series I Milling Machine (Remanufactured). Vari-Speed Drive Head, remanufactured. New drive belt, timing belt, bearings, seals etc. New x and y screws and nuts. New lines and meters for lubrication system. All ways hand scraped to original factory tolerances. All gibs refit with full adjustment. Servo powerfeed on x axis. Repainted to original factory color. One (1) year parts and labor under normal use and proper maintenance. 002 with magnetic seals. The item “BRIDGEPORT 48 2 HP MILLING MACHINE POWER FEED” is in sale since Thursday, October 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “kevinzierke2010″ and is located in Addison, Illinois. This item can be shipped to United States.

• Brand: Bridgeport

You may also like. Metal Mini Milling Machine Metalworking DIY Woodworking Power Tools Modelmaking. Motorized Metal Table Mini Milling Machine Metalworking DIY Woodworking Power Tools Machinery Student School Modelmaking. This item is located in California, USA/Shenzhen, China. Please note that the production material and models are not include. 1 tool is a milling cutter, milling machine, milling cutter and the side of the front blade. Has certain risk, so be sure to use under the guidance of professional personage. 2, machine main parts: such as the spindle, the tailstock, pedestal, slider, motor blades. Connection piece, gear adopts full metal structure. 3, the color of the machine tool is composed of red and black classical collocation. 1 Motor speed: 20,000rpm 2 Power: 12VDC/2A/24W, 3 Slide travel: 30 — 50mm 4 Clamping dimensions: 1- 6mm 5 Material: Carbon steel, Aluminum, ABS 6Vise clamping size : 30mm. Provide it when you order. Remote is defined as islands and highlands; or a post code/zip code that is difficult to serve; or a suburb/town that is distant, inaccessible or infrequently served. DHL remote areas range can be checked here. The item “Metal Mini Milling Machine Metalworking DIY Woodworking Power Tools Modelmaking” is in sale since Tuesday, May 30, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “care-mart” and is located in Santa Fe Springs, California. This item can be shipped worldwide.

• Country/Region of Manufacture: China
• Brand: ZHOUYU
• MPN: CMLQY0006
• Model: Z20005M
• Input Voltage / Current / Power: 12VDC / 2A / 24W

SPEEDY POWER DRAWBAR II. For VARIABLE SPEED and. STEP PULLEY TYPE MILLING MACHINE. MADE IN THE USA! Approximate weight: 18 lb. This Speedy Power Drawbar II comes with a Draw bar at no extra cost. Ple ase specify the type of milling machine and Drawbar (from the list a bove) you ha ve with the order! Don’t settle for an imported copy… NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. For all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “Speedy Power Drawbar for Variable Speed and Step Pulley Milling Machines NEW” is in sale since Thursday, April 21, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Largo, Florida. This item can be shipped worldwide.

• Brand: HIGH QUALITY TOOLS
• Model: 1038-1
• Country of Manufacture: United States
• MPN: 1038-1

Sign up to Newsletters. Power Feed APF-500X Torque for Type Milling Machines 0-210 RPM Feeding Device. You are looking at our new Power Feed X for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. 107T for plastic transmission gear and 6T for motor shaft gear 107 is not divisible by 6, 107 % 6 = 17.8333333333… The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Set the fix stand on work table, set table bearing bushing on the axis screw, then set the power table feed on the fix stand, take out the gear housing. Use one hand to hold the center transmission shaft. Set the bevel gear on axis screw with the other hand. Then check if the backlash between gears is between 0.1-0.2mm. Add shims (1.0t, 0.25t, 0.1t) if the backlash is too large. Repeat step 2-3 until reaching satisfying backlash. Tighten the handle to start setting socket parallel key and bevel gear. Rotate the handle slightly to feel if any interfere occurs in between. If do, please repeat step 3-4 to add more shims. If not, go to next step. Take out the handle, add proper shim (43×33), adjust the backlash between dial & bevel gear and lock with fix ring. Set the handle and tighten, slightly rotate the handle. Normally it should be smooth without any interfere. Finally, set the gear housing and limit switch. Power supply switch and reset switch. The right side of power switch is ON. The left side is OFF. Red light will show when machine is on. The red round button on right side is reset switch. Reset button will jump up to cut off the power if the machine overloads. The operator must reduce cutting load, then press reset switch to continue operating. Feed knob and rapid button. Rotate feed knob after power is on. Turn left for left side feeding and vice versa. The button in the middle is rapid button. Tool will travel rapidly to left side if you keep pressing the button. Release to make power table feed will back to normal speed. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. NOTE: To stop jog operating, you must first turn FEED KNOB TO 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Add an auto power table feed to your milling machine. A simple and inexpensive way to increase productivity. Small volume and easy installation. Excellent speed control in the entire range. Jog function operates at any feed speed. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Package Dimensions: 11713(275175335mm). 1 x X-Axis Fix Stand with Bushing. 1 x Bevel Gear with Fix Ring. 1 x Handle Washer. 2 x Stop Blocks. 2 x Stop Set. 2 x Socket Screws (M8P1.2535). X Socket Screws M8P1.0. 6 x Small Shims. 2 x Small Shims 26.2. 3 x Small Shims 26.2. 4 x Large Shims. 2 x Spring Pins. 1 x Cable Clamp. 1 x User Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “X AXIS POWER FEED MILLING US STOCK BRIDGEPORT & OTHER KNEE MILLS FITS WHOLESALE” is in sale since Tuesday, August 29, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dairuirui122_3″ and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Canada, Mexico, Australia.

• Brand: Vevor
• MPN: GC543006
• Model: APF-500X
• Country/Region of Manufacture: CHINA
• Torque: 150lbs
• Weight: 13.2lbs
• Color: White
• Current: 2.8A
• R.P.M.: 0-210
• Package Dimension: 11 x 7 x 13 inch

9 x 42 Bridgeport Vertical Milling Machine Model J. 60 – 2750 RPM. HP 1 HP 220 Volt 3 Phase. Machine Weight 2000 LBS. 1 HP MIlling Head. Please Note the power feed needs a new on/off switch. The table has a few holes and hits there where filled. The head is quiet and fully functional. Inspect under power in our Lebanon NJ warehouse. The item “9 x 42 Bridgeport Vertical Milling Machine Model J, Bridgeport Power Feed” is in sale since Friday, November 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mfmachinery” and is located in Lebanon, New Jersey. This item can be shipped to United States.

• Brand: Bridgeport
• Model: J
• Country/Region of Manufacture: United States

Item include: 1AL-310 power feed for X axis. It includes accessories for installion. The item “ALSGS 110V 220V Power Feed for Vertical Milling Machine X Y Axis AL-310SX US” is in sale since Tuesday, July 19, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “trustinchina” and is located in Walton, Kentucky. This item can be shipped to United States.

• Brand: Unbranded
• MPN: Does Not Apply

It is a very useful power feed system for the X axis to provide a smooth, variable speed drive to the travers of the table. This will enable control of the cut finish to a much greater extent than achievable by hand. With simple controls for left/right movement, auto stop in any position on the table provided by movable stops, overload protection and a fast traverse button giving 40 per min speed. Simple to fit and powered by a standard 110V/220V plug, so no wiring is required. ALB-310 Power feed details: RPM:200 Max torque:450in-lb Voltage:110V/220V for option. The item “ALSGS ALB-310 Horizontal Power Table Feed Milling 110V 220V” is in sale since Saturday, July 09, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “trustinchina” and is located in Los Angeles, California. This item can be shipped to United States.

• Brand: Unbranded
• MPN: Does Not Apply