“Model/Year” MODELA model MDX-15.

HAAS V0P40M T25 LATHE PROBE.

This Haas VF2SS milling machine has been expertly cared for and maintained, showcasing a near-new appearance that reflects the utmost attention to detail. Machine has been kept in working condition and used primarily for machining aluminum. Everything works properly and smoothly. The motor runs without any hiccups and the spindle sounds perfect. Functions on 220-260v 3-phase only with an 80-amp breaker. X Axis Travel: 30. Y Axis Travel: 16. Z Axis Travel: 20. Rapid Rate X Axis: 1,400 IPM. Rapid Rate Y Axis: 1,400 IPM. Rapid Rate Z Axis: 1,400 IPM. Table Size: 36″ x 18″. Max Table Load: 1,500 LBS. Spindle Motor: 30 HP. Spindle Speed: 12,000 RPM. Spindle Taper: 40 BT. Tool Changer: 24 ATC. Max Cutting 833 ipm. Max Weight 1500 lb. Max Thrust X 1995 lbf. Max Thrust Y 1995 lbf. Max Thrust Z 3085 lbf. Chip-to-Chip 3.6 s. Coolant Cap 55 gal. Amps 3 Phase 35A (High). Dimensions: 106″ x 101″ x 101. Weight: 7,800 LBS.

3D Touch Probe Trigger Edge Finder to Find Desktop Center F/ CNC Milling Machine. 1 x 3D Precision Tool Setting. CR1632 3V button battery. Product Name: Trigger 3D Edge Finder. Item model number: CF-38. Repeat positioning accuracy: =0.005. Probe direction: ±X ±Y +Z. Probe safety stroke: X. Y plane ±20°, Z direction +2.5mm. Trigger life:=3 million times. Power supply: CR1632 3V button battery × 1. Installation of the probe. As shown in the figure below, there is a wrench slot at the probe interface. When installing the probe, you must hold the probe seat to prevent it from rotating, otherwise the internal parts of the probe will be damaged. As shown in the figure below, remove the battery plug, remove the battery with tweezers, replace the battery with a new one, and install the battery according to the “±” mark on the side. After the replacement, plug the battery plug tightly. There is a wrench slot at the probe interface. Remove the battery rubber plug, remove the battery with tweezers, replace the battery with a new one and install the battery according to the “±” mark on the side. After the replacement, plug the battery rubber plug tightly. Adjustment of center deflection. The silver screw is the adjustment screw × 4. Use a dial gauge to measure the runout of the probe ball and adjust the runout to 0. 1x V5 3D touch probe. 1x Stainless steel probe tip. 1x Storage box for storing probe. The DIYO three-coordinate probe can realize quick centering, edge finding, center finding, shape measurement and other functions by connecting the CNC to the knife edge, which greatly;Repeatability Accuracy: 0.01 mm/ 0.0004 in. Solves the trouble of positioning the workpiece during the second clamping during the machining process. Adapt to various control panels such as grbl control panel and Mach3. NPN-NO 3 wires: Red-VCC (DC5-24V power);Yellow: IO/ Signal Output;Black- GND(DCM); Indicator light: green light when power on, red light after triggering. Material of the probe? The shell is made of fine frosted black oxidized aluminum alloy with a flat surface anti-roll design. Material of the stylus? The probe tip/stylus is machined from stainless steel up and down, and the ball head is made of tungsten steel ball, which has the advantage of wear resistance. Please measure and adjust it by yourself after receiving the goods. Be sure to use ER11 spring chucks of AAA or above, otherwise the concentricity of the probe tip will be affected. The feature of waterproof and dustproof greatly extends the service life of the probe. Our product comes with a storage box. The shockproof cotton in this storage box protects the probe well, and also avoids collisions and scratches during transportation. The probe tip is machined from stainless steel up and down, and the ball head is made of tungsten steel ball, which has the advantage of wear resistance. NPN-NO 3 wires: Red-VCC (DC5-24V power);Yellow: IO/ Signal Output;Black- GND(DCM). Repeatability Accuracy: 0.01 mm/ 0.0004 in. Approach Direction: ±X, ±Y, +Z. Over Travel Protection Distance: X- ± 4mm/0.16 in, Y- ±4mm/ 0.16 in,, Z- 2mm/ 0.08 in. Lifetime: > 3 million triggers. Yellow: IO/ Signal Output. Indicator light: green light when power on, red light after triggering. Software Recommendation for 3D Probe (We do not provide software). If you are using a mach3 system, it is recommended to use the open source Probe Wizard. If you are using the grbl system, it is recommended to use Grblgru. Need to turn on the spindle speed? Never, never, never, definitely no. How to distinguish the three wires? The red wire is VCC, the black wire is GND, and the white wire is IO. Why is the concentricity different every time the probe is installed? Because your ER chuck spring clip cannot ensure 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again. Problem&Feedback Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. Item must be in it’s original condition and no physical damage.

This machine is in great condition with no issues. It is all original paint. All of the axis sound great as well as the spindle. The machine is tight. If your local and would like to come see this machine in person I can power it up for you. Once it leaves my possession I’m no longer responsible for it. I do have a forklift on site and can load for you. I took a VERY DETAILED video of me operating this machine the day I posted this ad. Please watch that video by clicking on the video like in this box. I do have this machine posted on other platforms and reserve the right to remove at any time if I sell on one of those platforms. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “admoi-13″ and is located in this country: US. This item can be shipped to United States.

• Brand: Fadal
• Function: Milling
• Control: CNC
• Model Year: 1994
• Machine Type: Machining Center
• Power Source: Electric
• Voltage: 240 V
• Model: Fadal VMC 15
• Spindle Taper: CAT 40

HAAS DT-1 10k Spindle Probe Low Hours. Under power with low hours see picture. Rigid tapping Renishaw shop probing M controlled air blast chip auger. Can video upon request. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “phillipsdesign1″ and is located in this country: US. This item can be shipped to United States.

• Brand: Haas
• Function: Milling
• Model Year: 2011
• Control: CNC
• Machine Type: Vertical Milling Machine
• Max Spindle Speed (RPM): 7501 – 10000
• Voltage: 220 V
• Model: HAAS DT-1
• MPN: DT-1
• Spindle Taper: CAT 40

EXTENDED Y AXIS TRAVEL. SIDE MOUNT TOOL CHANGER. PRE NEXT GEN SERVICEABLE MACHINE. PRICE IS LOADED ON TO CUSTOMERS TRUCK. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “partsatnorthernmts” and is located in this country: US. This item can be shipped to United States.

• Function: Milling
• Brand: Haas

Mazak VCU 500A 5X 5 Axis Vertical Machining Center, Probe, Immaculate. This VCU 500 is in amazing condition, equipped with Renishaw Probe package, Chip Conveyor, Mist Collector, tons of options and only 2522 Cutting hours as of the time of listing. Originally used by Mazak as a demo machine. Options include: EIA Spiral EIA 3D Comp Rotation Geometric Scaling EXT-Data I/O Shape Comp Thread Inverse Time Dynamic Comp 3-D CO-OR ROT Auto TLM Polar Coordinates Input Comparison Stop G54.1 Sync. Mill Tapping Variable 600 Sets Simultaneous 5 Axis EIA Herical Tap Cycle EIA Patter Cycle Tilted Working Plane Work Pos Err Comp. We are proud to be a member of the MDNA. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinetool_emporium” and is located in this country: US. This item can be shipped to United States.

• Brand: Mazak
• Machine Type: VERTICAL MACHINING CENTER
• Model: Mazak VCU 500A 5X

USED RENISHAW PRESETTER TS27RB / RP2 PROBE UNIT. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “elitetooling” and is located in this country: US. This item can be shipped to United States.

2005 HAAS TM-2 CNC TOOLROOM MILL. Only 1,764 Cutting Hours. X, Y, Z TRAVELS. 40 X 16 X 16. SPINDLE NOSE TO TABLE TOP. 57.75 X 10.5. 0 – 4,000 RPM. MAXIMUM WEIGHT ON TABLE. 86 X 75 X 92 H. BUYERS ARE ENCOURAGED TO CHECK IMPORTANT CHARACTERISTICS. Point is loaded onto buyers truck in Atlanta, GA. 30 day return privilege. 90 days, labor only in AL, GA, SC, NC. For more information, please call Jimmy Payne at CNC South. The item “HAAS TM-2 Toolroom CNC Milling Machine, 40 X 16 X 16 Travel, Wireless Probe” is in sale since Tuesday, October 19, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “2old2no1″ and is located in Suwanee, Georgia. This item can be shipped to United States.

• Model: TM-2
• Machine Type: Milling Machine
• Function: Milling
• Brand: Haas
• Control: CNC