Rare, early, Brown & Sharpe horizontal milling machine. It has loads of original tooling in the base, as well as the vertical head. Also included is the jack shaft and cone pulley. The table swivels, allowing milling angles and tapers! Located in Erwin, TN. The item “Rare Early Brown & Sharpe Horizontal Milling Machine Mill Tooling & Vert Head” is in sale since Tuesday, December 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hicottn” and is located in Inman, South Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Brown & Sharpe
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

Each item is described to the best of our ability. We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details /Spec’s. (1) Pre-Owned Clausing 8512 Vertical Milling Machine Model 8520 a. 24″ x 6″ table. 5 of cross movement. Spindle Taper – #2MT. Vertical travel of the table 11. Clearance between the spindle nose and table top 15. Throat (from spindle centre to column) 8.5. Overall dimensions 36 ” deep x 40″ wide x 70 high. Inspect Under Power in Our Providence RI 02905. Great Overall & Operating Condition Ready To Work!! Additional & Optional After Sale Services. Above Are Typical Minimum Trucker Requirements Needed To Obtain The Best LTL Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Bdavis at davismachinery dot com. The item “Milling Machine Clausing Model 8520 Vertical Mill 6 x 24 Table, Rare Find Nice” is in sale since Monday, June 06, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Clausing
• MPN: 8520
• Country/Region of Manufacture: United States
• Model: 8520 Vertical

Each item is described to the best of our ability. We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details /Spec’s. (1) Pre-Owned Clausing 8512 Vertical Milling Machine Model 8520 a. 24″ x 6″ table. 5 of cross movement. Spindle Taper – #2MT. Vertical travel of the table 11. Clearance between the spindle nose and table top 15. Throat (from spindle centre to column) 8.5. Overall dimensions 36 ” deep x 40″ wide x 70 high. Inspect Under Power in Our Providence RI 02905. Great Overall & Operating Condition Ready To Work!! Additional & Optional After Sale Services. Above Are Typical Minimum Trucker Requirements Needed To Obtain The Best LTL Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Bdavis at davismachinery dot com. The item “Milling Machine Clausing Model 8520 Vertical Mill 6 x 24 Table, Rare Find Nice” is in sale since Thursday, May 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Clausing
• MPN: 8520
• Country/Region of Manufacture: United States
• Model: 8520 Vertical

2001 Fadal VMC 5020A High Torque Vertical CNC Mill. Fadal Vertical Machining Centers are designed and built to give you the maximum in useful performance. Every element meets the highest standards of quality, productivity and reliability. Virtually every component in the Fadal VMC is American made, to strict quality standards. The VMC 5020A offers excellent performance for jobs up to 50″ x 20″ in size and occupies a floor space of 116 inches wide by 87 inches deep. The 5020A is equipped with a 22.5 hp motor that generates 160 ft-lb of torque at the spindle. Please call for more information on making this Fadal VMC 5020AHT machine, yours! Fadal Multi-Processor CNC Control. Side Mount 24 Station Turret. 220 ft-lbs High Torque Spindle (Standard 160 ft/lbs). Built In Work Light. Full Enclosure Splash Guards. Process Completion Flashing Lamp. Automatic Way Lubrication System. Floor to Table Surface. 5 x 0.687″ x 3.75″. Cutting Feed Rate (X/Y/Z). Rapid Feed Rate (X/Y/Z). 900(X/Y) 700(Z) ipm. Maximum Weight on Table. Axis Drive Motor (X/Y/Z). Spindle Nose to Table. Spindle Center to Column. 22.5 HP, 11kW. Machine Floor Space Dimensions. 80 – 120 psi, 15 scfm. 45 Amps, 230/440 VAC, 3-Phase. Specifications subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 120″ x 90″ x 114H. MACHINE WEIGHT: 11,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. Jason Adler is our dedicated Finance Manager. Speak to him directly to find the program that best fits your business. The item “2001 FADAL VMC 5020 HIGH TORQUE CNC VERTICAL MILL Rare Size 22.5HP, 24ATC” is in sale since Tuesday, May 13, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Fadal
• Country/Region of Manufacture: United States
• Model: VMC 5020AHT
• Country of Manufacture: United States
• Serial No.: 012001072661
• Year: 2001

Nice table for a BenchMaster mill. One repair: JB weld filled in where a 1/4 end mill hit the table in 2015. Minor scuffs and a few stains. The item “RARE BENCHMASTER MILL MILLING MACHINE TABLE NICE CONDITION FOR IT’s AGE” is in sale since Sunday, February 21, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “indnrdr” and is located in Wichita, Kansas. This item can be shipped worldwide.

• Brand: BenchMaster
• Country/Region of Manufacture: United States
• Model: MV1 MH1 Mill

BE SURE TO CHECK OUR OTHER AUCTIONS FOR MUCH MORE MACHINERY EQUIPMENT! CHECK OUR OTHER AUCTIONS AS WELL FOR A VERTICAL MILLING ATTACHMENT THAT IS FOR THIS BENCHMASTER!!! Despite its compact size, it can produce a heavy load of work just like the big boys! Motor runs smooth, strong and quiet! Also, if you;re looking for the vertical attachment, check my other auctions and make a package deal! Cosmetically looks very nice (could be cleaned up a little more). Motor is strong and quiet! The item “RARE BENCHMASTER SMALL MILLING MACHINE MILL NICE CONDITION HARD TO FIND” is in sale since Tuesday, January 19, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mybigredjeepster” and is located in San Diego, California. This item can be shipped worldwide.

Some rusting as is seen in the photos. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. The item “MACHINIST TOOLS LATHE RARE Indexer Center for Atlas shaper Milling Machine” is in sale since Monday, December 01, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “gigigirl111″ and is located in Morris Plains, New Jersey. This item can be shipped worldwide.

This is an Bridgeport Milling Machine optical measuring system. It operates like an old school DRO. It is fully functioning and works amazingly well. It “reads” the table position in both the X and Y axis using optical lenses to view the glass scales, then transposes them measurements into the viewing screen. The viewing screen looks similar to a ruler, but is graduated in. 001, with a smaller scale below for. 0001 It is original Bridgeport equipment. It is currently installed on my milling machine and I use is almost everyday. It is accurate to. The viewing devices are mounted on aluminum dovetail brackets the have thumbscrew adjustments. The whole system bolts up to the milling machine using the factory Bridgeport holes. It could probably be made to retrofit to any kind of mill. It has a power supply with it that converts 110v power to 6 v DC, that powers the lamps for viewing. It uses little 6v motorcycle bulbs, readily available at auto parts stores. The only real drawback to this optical system is that you can not zero out the scales after you find and edge, bolt center, etc. You will have to manually keep track of your starting point, but it is not hard, and it works really well. I have seen on forums that these are actually quite rare. The original manual for the system is still available online. Were a little dimmer than normal, and I have not changed them. I have had better luck with high quality bulbs from Napa, but was being cheap. I will pack these very securely as the glass scales can be very fragile while moving, however they are very secure and protected when installed on the machine. There is a rubber protection strip that mounts above the scale as well to help protect from chips and fluids. These are very cool, work well, and have a certain Bridgeport coolness to them that any Bridgeport aficionado should appreciate. I also have these for sale locally, so I reserve the right to end the listing early if I have any offers locally. The item “Bridgeport Mill Optical Measuring System, old school cool, rare DRO” is in sale since Tuesday, October 27, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “patriotsteel” and is located in Loveland, Colorado. This item can be shipped to United States.

• Brand: Bridgeport

The rotary table is made by Benchmaster and the chuck is made by Buck. Model number 3-4 on the table and 439 on the chuck. The chuck looks like it is threaded for 1 1/2-8 Tpi. The unit operates but has some broken pieces on the slots. The item “RARE BENCHMASTER MILLING MACHINE 6 ROTARY TABLE With Buck Chuck As Is” is in sale since Wednesday, August 19, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “auctiondemo” and is located in Millbrae, California. This item can be shipped to United States.

RARE BENCHMASTER MILL MILLING MACHINE VERTICAL HEAD ATTACHMENT. Its been converted to grease. The cover has a notch cut into it to get to the grease nipple. This invoice will be sent within 24 hours of auctions end. The item “RARE BENCHMASTER MILL MILLING MACHINE VERTICAL HEAD ATTACHMENT” is in sale since Friday, June 26, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tool-in-the-box” and is located in Hillsborough, New Jersey. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

Recent searches

• benchmaster drill head accessory