2025
Buildmate Bosch 30pcs Set Router Bit Set Trim U0026 Edging 1 4 Inch Shank Mixed Cutter For Wood Bax
Comments Off
Comments Off
The ALBERTI T90-0.5C right angle milling attachment is a high-quality machining accessory designed for milling applications on machining centers. With a CAT 40 spindle taper, this attachment ensures precise and efficient machining performance. Made by the reputable brand ALBERTI, this milling attachment is a reliable and durable option for enhancing the capabilities of your metalworking equipment. ALBERTI T90-0.5C RIGHT ANGLE MILLING ATTACHMENT ER11 COLLET CAT40 SHANK 1:1 RATIO VGC.
Comments Off
Made in Japan by BIG Daishowa. This is an NBC16 Speed Increaser Milling Attachment w/ CAT50 Shank. Tool Capacity Range: 2.5mm to 16mm. Collet Size Included: 10mm. Gear Ratio: 1:4. Maximum Operating Speed: 15,000 RPM. Overall Dimensions: 6″ x 5″ x 13 high. Comes exactly as shown in pictures.
Comments Off
12Pc 3″ Boring Head R8 Shank 3/4″ Carbide Boring Bar Set Bridgeport Milling. 3/4 Boring Bar hole diameter. 3/4 Cross hole diameter. Description: 3 Boring Head. 3/4 Product application Shank Diameter No. Of Pieces Overall Length Bore Depth Min. Bore 3/4″ 12 pcs 3-1/8″ 1-1/8″ 7/16″ 3-11/16″ 1-11/16″ 7/16″ 4-1/4″ 2-1/4″ 7/16″ 3-1/2″ 1-1/2″ 9/16″ 4-1/4″ 2-1/4″ 9/16″ 5″ 3″ 9/16″ 3-7/8″ 1-7/8″ 11/16″ 4-13/16″ 2-13/16″ 11/16″ 5-3/4″ 3-3/4″ 11/16″ 4-1/4″ 2-1/4″ 13/16″ 5-3/8″ 3-3/8″ 13/16 ” 6-1/2″ 4-1/2″ 13/16 Product features Designed so that the same bar can bore flat bottomed holes or face Alloy steel shanks hardened and ground Ccarbide for steel and alloy steel 12 pc Set. Orders over a certain dollar amount will be insured and sent signature required. CANCELLATION NOTICE: Please be sure your address is correct before placing your order!
Comments Off
We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? And 3? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? By 3/4? By 3/4? With a brushed finish. 5? By 1/2? Shank hardened dowel pin with a 18-8 stainless set screw to retain. 1/4 by 1/4? Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.
Comments Off
We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? And 3? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? By 3/4? By 3/4? With a brushed finish. 5? By 1/2? Shank hardened dowel pin with a 18-8 stainless set screw to retain. 1/4 by 1/4? Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.
Comments Off
SANDVIK 2-1/2 FACE MILLING CUTTER + LYNDEX SHANK RA245-051R19-12L. You are purchasing this SANDVIK 2-1/2 FACE MILLING CUTTER + LYNDEX SHANK, numbered RA245-051R19-12L on the side. The shank has a diameter of. 095, and the distance to the beginning of the taper is 3. Will combine if it makes sense. THERE IS NEVER A NEED TO LEAVE NEGATIVE OR NEUTRAL FEEDBACK! Just let me know the item is on the way. Do NOT pay until you are finished! Please study the photographs, as they constitute part of the description, as do the questions at the very bottom–with their answers. This should be obvious, but just in case anyone is tempted to write me and ask.. Please note: my online name, ToolShedOfMassachusetts is not owned by, nor affiliated with, any business with the same or similar name. Vendio Images: More than just a pretty image. 250+ Mobile Responsive & Active Content Free Listing Templates with Vendio Sales Manager. Get business information that counts! – Vendio Counters are active content free.
Comments Off
Please call with any questions. We will assist you in any reasonable way to help get your items to your destination, All checks subject to bank verification. Please Call: Two Zero T hree, Five Nine Two, Eight Four Zero Two, with any questions or concerns, Thank You! You are welcome to inspect any machine by appointment. Guerrera Machine Company, LLC. Will not be held liable for any inaccurate information.
Comments Off
Made in the USA by Volstro Manufacturing. This is a Rotary Offset Milling Head Attachment w/ R8 Shank. Includes Accessories and Case. Collet Sizes Included: 4-3mm, 5-4mm, 7-6mm, 8-7mm, 10-9mm, 12-11mm, 13-12mm. Head Rotation: 360 degrees. Mounting Collar Diameter: 3-3/8. Overall Dimensions: 10-1/2″ x 5-3/4″ x 10-1/2 high. Case Dimensions: 13″ x 13″ x 8 high. Comes exactly as shown in pictures.
Comments Off
We will take care of you! Cell Phones & Accessories.
Comments Off