Milling Machine Shaft Spindle Taiwan Rocker R8 Conversion NT40 Vertical For Mill Part CNC Milling Machine. Name: Milling machine R8 conversion NT40 spindle. Dimensions: Spindle stem is the same size as R8, spindle head is the same size as NT40. Applicable machine tool: milling machine.

Cnc Remax 5 Axis 7.3kw Spindle Ats 220vac 60hz Allmost New.

Your Best Online Business Partner.

Please ask any questions prior to purchasing, happy to provide measurements/etc if needed.

After the spindle is replaced, the work effect is as new. Fit for most Milling machine. 1 Set 6206 Bearing.

2.2kw air-cooled spindle from Spinogy with 30,000rpm ER-20 collet. This item has a custom machined tramming plate included with 1 degree of tramming in either direction. The tramming plate locks down onto a z-axis carriage with (6) M8 shoulder style bolts (McMaster-Carr part #: 92981A756) included in this kit. The spindle then mounts directly to the tramming plate with (4) M6 shoulder style bolts (McMaster-Carr part #: 92981A196) also included in this kit. Provided is a shielded cable with connector from Spinogy and is 17′ long. This spindle has about 5 hours of total runtime before it was removed in favor of an ATC spindle and is in like new condition. (1) Spinogy X-22 air cooled spindle 2.2kw 30,000rpm ER-20 collet. (1) Custom machined tramming plate 6061-T6 aluminum. (6) M8 shoulder bolts mcmaster pn: 92981A756. (4) M6 shoulder bolts mcmaster pn: 92981A196. (1) Helukabel Topserv PUR shielded cable from Spinogy 17ft in length. (1) collet wrenches.

The VFD / Inverter does not need to be set and can be directly plugged in for use.

PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST TO ANSWER ANY QUESTIONS.

For sale is (1) optical spindle encoder part number 32-1457 AKA 93-0446. This is a replacement for older machines that have either a black or blue colored optical encoder. This was a rigid tapping encoder on a 1998 VF-1 with gearbox. Included is the short adapter cable (not pictured) that goes from the round plug on the encoder to the molex minfit connector. This encoder is tested working and was pulled from a running machine that was parted out.

For sale is a 40 taper spindle cartridge, I believe for a Haas but can’t confirm and there aren’t any helpful identifying marks. It came with a lot of other Haas parts I will also be listing. It does spin freely but I have no way to gauge the condition of the bearings. If there are any measurements that would be helpful just ask. Check out my other listings for more tooling.