TYPE PRECISION MILLING MACHINE. LISTING INCLUDES THE FOOTSTAND FOR THE PM25MV WITH 4PCS LEVELING FEET AND PADS INCLUDED! This machine requires a Standard 120V Power Supply! Highlights Of This Machine. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. Variable Speed with Belt Drive and Brushless DC Motor. Installed 3-Axis DRO w/LCD Display. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4? Face Milling Capacity 2/1/2? Table Size 27-1/2? X 7-1/8? Cross Travel (Y Axis) 7? Longitudinal Travel (X Axis) 19? Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13? Max Distance Spindle to Table 13? Taper of Spindle R-8, with 7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2? Kit listed is sized for this machine. Range of Spindle Speeds 50-2500rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Stand Dimensions: 13-3/4? W x 16-3/4? D (Top surface where machine mounts). Net Weight (Not Including Base) 275 LBS. Net Weight (With Base) Approx. Country of Origin: China. Power Required 110/120V, Minimum 15 Amp Circuit Approx. 5′ cord with standard 120V plug included. Average time delivered is 2-7 days depending on how far from Pittsburgh you are located. If you need liftgate service, please message us one you place your order to let us know. Quality Machine Tools / Precision Matthews Machinery Co. 1060 Montour West Industrial Park. We are machinists here too and have been in business for over 20 years. We know our machines and we know what we sell. So if there is any question, we can help.

STAND INCLUDED WITH LISTING! This machine requires a Standard 120V Power Supply! Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard. Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4? Spindle To Table Max Distance for taller work. 8-1/2? Y Axis Travel, More than other machines in this class. 3 Axis DRO Installed. Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered. Drilling Capacity: 1-1/4? Max. End Milling Capacity: 1? Max. Face Milling Capacity: 3? Table Size: 27-1/2? X 7-1/8? Cross Travel (Y Axis): 8-1/2? Longitudinal Travel (X Axis): 15? Table Leadscrew Pitch 10 TPI. 100? Per Turn Table Dial Graduations. 001? Vertical Travel (Z Axis): 16? Max Distance Spindle to Table: 18-1/4? Taper of Spindle: R-8, w/7/16-20 Drawbar Thread Spindle (Quill) Travel: 3? T Slot Size: 1/2? (T Slots are slightly less than 1/2? , actual size 12mm, our 1/2? Kit is sized for this machine) Range of Spindle Speeds: 115 – 1700 rpm, 6 Steps Head Tilt: Left & Right ±90° Motor: 1 HP Net Weight (Not Including Base): 475 LBS Net Weight (With Optional Base): 575 LBS Power Required: 110/120V, 20A Circuit. 5′ cord, Includes 120V Plug with ground Dimensions (Assembled on stand): 39? W x 74? H x 30? D Height with head at top of Z travel: 80? (On Stand) Height with head at normal working height: 75? (On Stand) Optional Stand Height 32? Country of Origin: China. Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2″Wx21″D Machine Base Dimension (Bolt Pattern) Approx. 11″Wx14-1/4″D Table Height, machine base (Where it sits on the chip tray) to table, approx. 8-1/2? Footprint of stand at floor, approx. 14-1/2? W x 21-1/4? Front to back. Average time delivered is 2-7 days depending on how far from Pittsburgh you are located. If you need liftgate service, please message us one you place your order to let us know. Quality Machine Tools / Precision Matthews Machinery Co. 1060 Montour West Industrial Park. We are machinists here too and have been in business for over 20 years. We know our machines and we know what we sell. So if there is any question, we can help.

Heavy-Duty Mill Drill stand. Compatible with JET 350017, JET 350018, JET 350020. For use with JMD-15, JMD-18, and JMD-18PFN Drilling/Milling Machines. What’s in The Box. JET CS-18 Stand for Mill/Drills. JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. 30 Day Satisfaction Guaranteed. 26″ x 32″ x 29. Secure & hassle-free shopping. All our sales are backed by a 30-day satisfaction guarantee.

3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling – Much improved over the single bolt mount type.

Item model number: 350045. Compatibility: Designed to fit JET JMD Series mill drills.

G0704 7″ x 27″ 1 HP Mill/Drill with Stand. G0704 7″ x 27″ 1 HP Mill Drill with Stand. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill.

RK Rose+Krieger Manual Hand Crank Column Stand. Previously used with a dot peen marking machine. Overall length is 24″ and movement range is around 12″ to 13. The unit holds a 30mm diameter horizontal boom (not included). Label reads “RK Rose+Krieger Connection and Positioning Systems” in German. Item weight is 12.25 lbs. Appears to be fully functional.

These are JET tool stands model CS-18. They can be used in your shop for any tool that will fit the dimensions of the top and they can support several hundred pounds.

Jet JMD-18 Milling Drilling Machine 2 HP BRAND NEW MILL DRILL 1 Phase With Stand.