BRIDGEPORT 2HP VERTICAL MILL. 9″ X 42″ TABLE. WGT: 2,000LBS.

For sale is a Bridgeport Series 1, 2 HP Vertical Milling Machine 3 Phase, 9 x 42 Table, Power Feed and Newall C70 DRO. The mill is used and came from a working environment. It has been serviced and everything is in very good working condition. This mill is clean and has been very well maintained. Machine power supply will come bare wire as shown in last photo. Overall this Bridgeport remains in excellent, ready to use condition. Thank you for looking and please let us know if you have any questions. International Buyers Please Note. Doing that is against U. We at eTech Surplus strive to honestly and accurately describe each item we sell.

Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds. This is an American made cross slide, it came off of a machine we parted out where it had held a grinding spindle. The dovetails are tight (no play). The screws are not preloaded and the handle turns a little before the slide moves when reversing direction. The base is 6-3/4 square. The top has a 4 diameter milled surface with a 3/4-10 threaded hole. The height is 5. The weight is 43 pounds. It is a residential address. It is an agricultural address. Your business property also has a residence. You are a business surrounded by residential or agricultural area. You are a stand-alone business or one of only a few businesses miles from other commercial hubs. Our carriers will consider your address limited access if it is a: Cemetery, Church, Country Club, Farm, Golf Club, Hotel, Mall/Shopping Center, Mine, Park, Prison/Correctional Facility, School/College/University, Storage Facility or a utility site. Our carriers will also consider your address limited access if. A semi truck can not easily pull into and turn around. A semi truck must park on the road. A semi truck has to back in off the road. Please call ahead so we have time to pull your items from our Inventory. Thank you for your time and we look forward to serving you.

5 Combination Sine Table.

This is a USED Lagun Variable Speed Milling Machine that is made in Spain & Serial Number is SE-20645. It has a 10″x44″ table, R-8 spindle with 16″ of cross travel, 24″ of longitudinal travel, 16″ of knee travel & 5″ of quill travel. Head will tilt to the right & left 90°, then forward & back 45°. Then it has three 5/8 T-Slots & dials that read in. Includes a 6 vise, Servo table feed which does not work, but can be repaired. Also includes one-shot lube, work light, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″ R8 collets & a 1″ endmill holder. It has a 3 H. Motor that is 208/220/440-volt & weights in around 2400 lbs. Ever in the Toledo Ohio area? E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call!

WILL NEED ZIP CODE PLEASE CHECK.

/ Template: Frooition Description: Version: 1.2 /. CNC Vertical Machining Centers. America’s Premier Machine Tool Dealer. Providing Quality Machining and Fabrication Machinery Solutions. Air Cooling & Heating Equip. Chemical & Processing Equip. Cleaning, Painting, & Washing. CNC Horizontal Machining Ctrs. Electrical and Power Equipment. Glass and Window Machinery. Inspection & Measuring Equip. Paper & Printing Equipment. Tube and Pipe Machinery. Add to Favorite Sellers. Sign up to Newsletter. Fadal VMC4020HT Vertical Machining Center w/ Calmotion 4th Axis Rotary Table. 24′ L x 8′ W x 10′ H. Max Weight on Table. 0 – 10000 RPM. Spindle Nose to Table. Fadal Multiprocessor CNC Controller, Calmotion 4th Axis Rotary Table, 24 Capacity Side Mount ATC, Coolant Tank, Hennig Chip Conveyor. The Fadal VMC can be demoed upon request. Check out the video on the listing to see it in operation. Video will open in a new window. The Equipment Hub is a used machinery dealer and auctioneer that provides superior industrial equipment solutions to manufacturers throughout the world. We operate in a 40,000-square-foot warehouse and showroom located in Stone Mountain, Georgia with satellite offices located in Florida, North Carolina, and Texas. Established in December 2011, our core belief is that superior customer service is of paramount importance to the success of our company and yours. As proud members of the MDNA (Machinery Dealers National Association) we back up our core belief by providing 30-day MDNA return privileges on most of the machinery we sell. The Equipment Hub provides various services to help manufacturers achieve their machinery goals. We look forward to doing business with you and becoming a lifelong business partner. If you prefer to set up your own trucking we will place the item on a standard pallet with metal banding. If you need a custom pallet or skid built we can direct you toward local companies that provide these services. S place of business, unless otherwise specified on the accompanying “quote/invoice” form. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. STORAGE: The Equipment Hub will provide up to 30 days of free storage, unless otherwise specified on the accompanying “quote/invoice” form. Basis or brokered bears a thirty day return privilege. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. You May Also Like. View more great items. Haas DM-2 Vertical Machining Center, VMC w/ TRT100 5th Axis (2017). $74,999.00. Haas EC-400-4AX CNC Horizontal Machining Center. $39,500.00. Brother TC-324N CNC Vertical Machining Center, VMC. $16,000.00. Tsugami VA2 High Speed Vertical Machining Center. $59,950.00. Shop Popular Used Machinery Categories. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

Z-Axis power feed is made of aluminuml;Power Parameter:90Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. AUTOMATIC AND MANUAL CONTROL? You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work. And this mulitfunctional milling machine power feed can work with excellent speed control in the entire range according to your needs. This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage. PORTABLE AND EASY TO INSTALL? This power feed for milling machine is compact and portable. Weight: 3.75kg/8.27lbs, Size: 73.512.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself. This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end, But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Max Return Speed: 850 mm/min. Dimension: 8″x4.5″x13. Package Size: 11.8″x8.7″x13.8. Gross Weight: 16.5 lbs. 1 x Power Feed Z-axis for Milling Machine. 1 x Copper Gear & 1 x Flat Key Pin. 2 x Limit Block. 15 x Round Flat Washer. 1 x Nominal Diameter. 4 x Install Screw. 1 x Limit Switch Box. 2 x Limit Switch Spring+1 x Handle Spring. 1 x Bearing Inner Ring. 1 x Connecting Rod & 1 x Flange.

Please review pictures carefully and let us know if you have any questions! At Interscope we know that with today’s challenges, equipment maintenance and replacement can be costly; however we have a solution. Through our partnerships and program, we have access to an extensive inventory of new surplus and used components and assemblies that can not only deliver a significant cost savings, but also reduce lead time. We have a complete machine shop and manufacturing, fabrication, and assembly capabilities. We can rebuild assemblies, complete processing lines and other capital equipment at a substantially lower cost than new.

MYSWEETY Multifunction Worktable Milling Working Cross Table Milling Machine Compound Drilling Slide Table For Bench Drill Adjustme X-Y (6350 SIZE). Mini multifunctional working table 6350, The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy. Adjustment in X direction: 180 mm. Adjustment in Y direction: 50 mm, Distance between grooves : 34mm. Hand wheel with adjustable scale: A ring = 3 mm. Ideal for all drill stands, drilling and milling machines. Specification: Name: Bench Drill Work Table Vise Model: 800913 Specifications: 6350 Adjustment For X Direvction: 180mm Adjustment For Y Direvction: 50mm Material: Carbide Steel Color: Mainly Silver Size: 350100122mm Features: -Made with best quality components -Precise scale for better working -This support table is completely pre-assembled -Strong and sturdy -Stable performance Application: Ideal for all drill stands, drilling and milling machines. Package included: 1 X Milling Support Table Worktable Supplied with screws. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.