1985 Aciera F1 Precision Universal Milling Machine. In absolute excellent condition both working & cosmetically. One of the rarest and cleanest “barn find” Acieras we’ve ever come across. Original paint and comes loaded with attachments. Absolutely beautiful precision, hard to find Swiss made gem. You will not find another one like this! The spindle is quiet throughout the speed ranges, ways are beautiful & very minimal backlash on the screws. Full description with complete tooling list below. Everything on this machine is in 100% working condition and comes loaded with features. This machine was well taken care of. Backed by our 30-day return privilege. Check out the short video below of the machine under power. ACIERA F1 Precision Universal Milling Machine Demo. Aciera F1 Universal Precision Milling Machine. Longitudinal travel of the table 3.94. Vertical Travel of the Table 5.90. Transverse movement of the headstock 2.95. Graduated feedscrew drums, 1-div. Movement of quill in its housing 1.97. Pitch of feedscrews (mm or tpi) 2mm (10 tpi). Headstock movement , 1-turn of crankhandle. Long movement, 1-turn of crankhandle. Vert movement, 1-turn of crankhandle. Cutter spindle clamping collet, shank dia. Plain Table – horizontal spindle axis. 39″ (Min) to 6.3″ (Max). Plain table – Vertical Spindle Nose distance 0-6.89 max. Plain Table Clamping Area 8.66″ x 3.94″. Collet clamping range, bore dia 1/16″ to 3/8″. Vertical & Horizontal Capability. Welded Steel Cabinet Base with Storage. Standard Vertical Support Spindle. 4.72 Rotary Table Attachment. Rotating 2.16 Vise Attachment. Simple Dividing Head (No indexing arbor). Spindle Dividing Head Center Support. 5C Collet Indexing Head (Non-Aciera). 5C Collet Clamping Fixture (Non-Aciera). Various Table clamping Tools. The milling head is a single unit, including the motor, gear box and cutter spindle. It can be mounted horizontally, or vertically by means of one of the vertical supports; these supports can swivel to left or right and one of them also tilts forwards and backwards. The machine is therefore universal in the true sense of the word. The cutter spindle, with provision for W 12 collets and spindle inserts, is hardened and ground and runs free from play in high precision pre-loaded bearings. The feedscrews are of special steel and have a ground thread. The 3 slides have ground and scraped prismatic-section slideways and any play is taken up by tapered gib-strips. These are some of the features which permit the “toolmaker’s accuracy” of +/. The work-holding accessories, such as the plain table and, by the intermediary of the swivel support, the universal table, the rotary table, the vices and the dividing heads, are mounted on a dove-tail section on the horizontal slide, which permits their displacement along it, and also effectively doubles the horizontal traverse. Fine Feed by Feedscrew or Rapid Feed by Lever. The slides may be traversed either by feedscrews or levers, dependent on the application of the machine. The changeover from one method to the other is effected by clamping or unclamping the feedscrew nuts. The graduated drums read to 0.01 mm. Vertical Compensation by Spring. The vertical slide is equipped with an adjustable compensating spring, which guarantees lightness of vertical traverse irrespective of the load on the table. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. S forms which are different or in addition to the terms herein. S accepting or retaining possession of the goods described on this invoice. The free listing tool. The item “ACIERA F1 Swiss Precision Universal Milling Machine. Loaded. Rare Barn Find” is in sale since Monday, December 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped to United States.

• Model: F1
• Country/Region of Manufacture: Switzerland
• Machine Type: Milling Machine
• Model Year: 1985
• Power Source: Electric
• Brand: Aciera
• Control: Manual
• Voltage: 220 V

1985 Aciera F1 Precision Universal Milling Machine. In absolute excellent condition both working & cosmetically. One of the rarest and cleanest “barn find” Acieras we’ve ever come across. Original paint and comes loaded with attachments. Absolutely beautiful precision, hard to find Swiss made gem. You will not find another one like this! The spindle is quiet throughout the speed ranges, ways are beautiful & very minimal backlash on the screws. Full description with complete tooling list below. Everything on this machine is in 100% working condition and comes loaded with features. This machine was well taken care of. Backed by our 30-day return privilege. Check out the short video below of the machine under power. ACIERA F1 Precision Universal Milling Machine Demo. Aciera F1 Universal Precision Milling Machine. Longitudinal travel of the table 3.94. Vertical Travel of the Table 5.90. Transverse movement of the headstock 2.95. Graduated feedscrew drums, 1-div. Movement of quill in its housing 1.97. Pitch of feedscrews (mm or tpi) 2mm (10 tpi). Headstock movement , 1-turn of crankhandle. Long movement, 1-turn of crankhandle. Vert movement, 1-turn of crankhandle. Cutter spindle clamping collet, shank dia. Plain Table – horizontal spindle axis. 39″ (Min) to 6.3″ (Max). Plain table – Vertical Spindle Nose distance 0-6.89 max. Plain Table Clamping Area 8.66″ x 3.94″. Collet clamping range, bore dia 1/16″ to 3/8″. Vertical & Horizontal Capability. Welded Steel Cabinet Base with Storage. Standard Vertical Support Spindle. 4.72 Rotary Table Attachment. Rotating 2.16 Vise Attachment. Simple Dividing Head (No indexing arbor). Spindle Dividing Head Center Support. 5C Collet Indexing Head (Non-Aciera). 5C Collet Clamping Fixture (Non-Aciera). Various Table clamping Tools. The milling head is a single unit, including the motor, gear box and cutter spindle. It can be mounted horizontally, or vertically by means of one of the vertical supports; these supports can swivel to left or right and one of them also tilts forwards and backwards. The machine is therefore universal in the true sense of the word. The cutter spindle, with provision for W 12 collets and spindle inserts, is hardened and ground and runs free from play in high precision pre-loaded bearings. The feedscrews are of special steel and have a ground thread. The 3 slides have ground and scraped prismatic-section slideways and any play is taken up by tapered gib-strips. These are some of the features which permit the “toolmaker’s accuracy” of +/. The work-holding accessories, such as the plain table and, by the intermediary of the swivel support, the universal table, the rotary table, the vices and the dividing heads, are mounted on a dove-tail section on the horizontal slide, which permits their displacement along it, and also effectively doubles the horizontal traverse. Fine Feed by Feedscrew or Rapid Feed by Lever. The slides may be traversed either by feedscrews or levers, dependent on the application of the machine. The changeover from one method to the other is effected by clamping or unclamping the feedscrew nuts. The graduated drums read to 0.01 mm. Vertical Compensation by Spring. The vertical slide is equipped with an adjustable compensating spring, which guarantees lightness of vertical traverse irrespective of the load on the table. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. S forms which are different or in addition to the terms herein. S accepting or retaining possession of the goods described on this invoice. The free listing tool. The item “ACIERA F1 Swiss Precision Universal Milling Machine. Loaded. Rare Barn Find” is in sale since Tuesday, December 3, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped to United States.

• Model: F1
• Country/Region of Manufacture: Switzerland
• Machine Type: Milling Machine
• Model Year: 1985
• Power Source: Electric
• Brand: Aciera
• Control: Manual
• Voltage: 220 V

We are pleased to offer you.. Aciera , Model F1 Universal Precision Milling Machine, Equipped with Haas Model 5C CNC Ring Indexer Control. Our Inventory Number: 2533-460. Motor: cutter spindle 0.33 HP, 2800 RPM. Motor coolant: 0.10 HP, 2800 RPM. Spindle: ww collets, shank diameter: 12mm. Speeds: 125 – 200 – 310 – 500 – 1000 – 1800 – 2500 – 4000 RPM (8). Supplemental table movement on slide: 100mm. Horizontal – total: 200mm. Transverse of the headstock: 75mm. Manual traverse: by feed screw or by lever. Horizontal feed screw, 1 turn: 2mm. Vertical feed screw, 1 turn: 2mm. Transverse feed screw, 1 turn: 2mm. Graduated drums – 1 – division: 0.01mm. Plain table – horizontal spindle axis: 10-160mm. Plain table – vertical spindle nose: 0 – 175mm. Maximum cutter diameter under steady arm support: 60mm. Plain table clamping area: 220 x 100mm. 3 – T-slots width: 8mm. Overall dimensions: 51″(w) x 21″(d). Estimated weight: 264 lbs. 360 degree rotary table. 180 degree angular work piece holder. Trico spray mist unit. Aciera modular steel cabinet stand with dual storage. Motorized CNC ring indexer attached to Haas Model 5C controller, S/N: 52278. If you have any questions, please feel free to reach out to us. We will load your truck for free from our adjustable loading dock (not crated). Our company is a third generation family owned machine dealer with over 50 years experience in the field. Were conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills, all dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85,000 square foot Showroom/Warehouse facility is located at the Foot Of Exit #26 off Interstate Route 95 North in Pawtucket, Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clienteles machinery and equipment needs. We are always available to handle your requests. Please note that freights costs are determined by the weight, size, and destination. We do offer financing through Direct Capital. The item “Aciera Model F1 Universal Precision Milling Machine, Equipped with Haas CNC -5C” is in sale since Thursday, April 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “goldmachinery” and is located in Pawtucket, Rhode Island. This item can be shipped to United States.

All are in very good to excellent condition. Both universal tables include all tramming indicators and covers. The second table came off an FP4NC machine. They both have 14mm t-slots. The slotting head was rebuilt by Franz Singer in Germany. The milling machine is NOT a servo driven ball screw machine, but has acme lead screws that allows for free-cranking manual machining along with programable linear movements. It has a 40 year old control that still runs (machine is currently under power,) but may be difficult to find parts for should it fail. Most of the value in this group are in the two tables and the slotting head which may all be used on various manual and NC Deckels. Contact for more pictures. The item “Deckel FP3A Mill + Slotting Head + 2 Universal Tables” is in sale since Thursday, November 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bramu” and is located in Ferndale, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: Germany
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 2500
• Model Year: 1981
• Power Source: Electric
• X-Axis Travel Bed: 20 inch
• Y-Axis Travel Bed: 12 inches
• Z-Axis Travel Bed: 16 inch
• Spindle Taper: 40 Taper with DIN Pull Stud
• MPN: FP3A
• Function: Drilling
• Brand: Deckel
• Control: CNC
• Voltage: 230 V

VICEROY AEW’HORIZON’ MILLING MACHINE. UNIVERSAL MILL WITH MULTIPLE FUNCTIONS. COMPLETE WITH QUICK CHANGE COLLET CHUCK, BUILT IN COOLANT, WORK LIGHT, SPINDLE GUARD, FOOT PEDAL E-STOP AND MACHINE VICE. VERY COMPACT YET POWERFUL MILL IN GREAT CONDITION- FULLY SERVICED AND RUNS LOVELY! CUSTOMER TO COLLECT OR PALLET SERVICE AVAILABLE. The item “VICEROY AEW HORIZON UNIVERSAL MILLING MACHINE, 3 PHASE WITH VICE” is in sale since Thursday, November 7, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “sorted-uk” and is located in Bristol. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Bahamas, Colombia, Jamaica, Kuwait, Panama, Qatar, Uruguay.

• Machine Type: Vertical Milling Machine
• Function: Milling
• Brand: VICEROY
• Control: Manual

Used Burke B-100-4 4×20 universal horizontal milling machine. Mill runs fine, power feed and kick outs work fine as well. Table and ways are decent. Backlash is 1/2 turn on the x and about 1/4 turn on the y and knee. Currently has a 1/2hp 110volt motor. Paint is a decent. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Burke B-100-4 Universal Horizontal Milling Machine Power Feed Benchtop 4×20″ is in sale since Wednesday, October 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Spindle Horsepower: Less than 1 hp
• Machine Type: Horizontal Milling Machine
• Brand: Burke
• Voltage: 110 V

VICEROY AEW’HORIZON’ MILLING MACHINE. UNIVERSAL MILL WITH MULTIPLE FUNCTIONS. COMPLETE WITH QUICK CHANGE COLLET CHUCK, BUILT IN COOLANT, WORK LIGHT, SPINDLE GUARD, FOOT PEDAL E-STOP AND MACHINE VICE. VERY COMPACT YET POWERFUL MILL IN GREAT CONDITION- FULLY SERVICED AND RUNS LOVELY! CUSTOMER TO COLLECT OR PALLET SERVICE AVAILABLE. The item “VICEROY AEW HORIZON UNIVERSAL MILLING MACHINE, 3 PHASE WITH VICE” is in sale since Thursday, October 24, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “sorted-uk” and is located in Bristol. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Bahamas, Colombia, Jamaica, Kuwait, Panama, Qatar, Uruguay.

• Machine Type: Vertical Milling Machine
• Function: Milling
• Brand: VICEROY
• Control: Manual

Van Norman Ram Type Universal Milling Machine. 3 HP Main Drive. 220V/440V / 3 / 60. (14) 55 – 2000 RPM. (9) 3/4 – 17 IPM. 55″ x 60″ x 76. The item “Van Norman Universal Ram Type Milling Machine ID# M-046″ is in sale since Wednesday, August 15, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “energ_machinery” and is located in East Hampton, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Type: Manual Horizontal/Vertical
• Highest Spindle Speed (RPM): 1501 – 2000
• Make: Van Norman
• Model: 1R-3-22
• Country/Region of Manufacture: United States
• Table Length: 40” – 59.9”
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: 10” – 15”
• Z-Axis Travel Bed: 21” – 25”
• Table Width: 10” – 14.9”

Deckel FP4M CNC SERVO II Universal Milling Machine Vertical Horizontal Mill Nice. This Machine Runs Good and can be inspected in our warehouse. You can contact me at. 8I8 44I – 894I. If you have any questions. Please see pictures for additional details. The item “Deckel FP4M CNC SERVO II Universal Milling Machine Vertical Horizontal Mill Nice” is in sale since Monday, September 25, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron11″ and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

• MPN: Does Not Apply
• Brand: DECKEL
• Model: FP4M
• UPC: Does not apply