This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, VARIABLE SPEED 3 YEAR WARRANTY” is in sale since Wednesday, August 23, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

This Listing is for a. With Electric Motor for Head Positioning, No more cranking the head up and down by hand! And X Axis Table Power Feed Included – BE SURE TO NOTICE THESE WHEN YOU COMPARE, OTHERS DO NOT HAVE THESE FEATURES. Here are some features of this milling machine. Quill Depth DRO, R8 Spindle Taper. Different packages available to meet user’s. Class 5 high precision spindle bearings. Generous table size and travel in a compact machine. Solid Dovetail Way Column for high rigidity and precise up and down. Easy speed changes, no need to open any covers and change belts. Just stop, flip a lever, and go. Very Solid cast iron head and body make deeper cuts no problem. Head tilts 90 degrees left and right for angled cutting. Oil Filled gearbox in head for long life. Ears in head for long life. Adjustable tapered gibs and backlash to keep the machine tight and. Precision Matthews 3-Axis Digital Readout. So with this machine, you will receive. Z Axis / Head Electric Motor for head positioning. X Axis Table Power Feed. Quill DRO is built in. Cast Iron Stand/Base as pictured. Precision Matthews 3-axis Digital Readout. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table T-Slot Size and Number. Table Travel, X Axis. Table Surface Height from floor. 34-3/4 With base flat on. Base Dimension at floor. 18-5/8″W x 27″D. Normal Working Max Height: (top of column travel motor). Height with head all the way up: (top of main motor). Stand (Base) height, to machine mounting surface. Cross Travel, Y Axis. Distance Spindle to Table. With 7/16-20 drawbar thread U. Side To Side, 90 Degrees. Some other similar machines will say. That they are 2HP, but its the SAME exact motor as this one, just rounded. Up to 2hp and marked that way, we prefer to be honest and mark it as. What it really is, which is 1.5HP. More than enough power for. Fine Grain Cast Iron. With Base, 850 Without Base. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL MILLING MACHINE with3AXIS DRO X-AXIS PWR FEED 3YR WARRANTY” is in sale since Thursday, August 17, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Make: Precision Matthews
• Model: PM-932M w/PM-3ax & PM-932M-CASTSTAND
• Type: Manual, Vertical
• Model Year: 2017
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5

Replaces most top name brand displays. Welcome to some of the most user friendly, reliable and affordable DRO you will find anywhere! For the price you will find that these will stand up with any of the. Big name Brands on the market today, at half the cost. They have stood up to the test of time – with many satisfied customers already. These units are simply the best in terms of quality, value and functionality. Kits Also Available: Check out Toolmann Store. 5 um (0.0002) resolution scales (display supports 0.1um – 10um). Can be switched between Mill, Lathe, Grinder and EDM. Supports both English and Metric units (in/mm display). Absolute and Incremental measuring mode. Center line (1/2) function – Sub datum (200 points). Tool library (200 points). Linear drilling function Mill Mode. Bolt circle (PCD) machining in Mill Mode. Incline and oblique plane machining Mill Mode. Simple and Smooth Radius machining Mill Mode. Asymptotic machining of inner cavity (cambering) Mill Mode. Radius/Diameter function in Lathe mode. Taper function in Lathe mode – Axis summing in Lathe mode. Filter in Grinder mode. Linear and non-linear error compensation. Auto Zero/reference function – Calculator with trigonometric functions. Sleep Mode – Power Off memory. 100-240V, 50/60Hz universal AC power. Mounting Arm and hardware included. Toolmann is a US company and we stand behind our products. This item is GUARANTEED against DOA. Defective items will be replaced upon receipt and completion of manufacturers inspection process. Defects caused by improper installation, abuse, physical damage, and normal tear and wear are not covered. The item “DRO Display 3-axis USA -2yr warranty programmable” is in sale since Saturday, May 06, 2017. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Manufacturing Equipment Parts\Digital Readouts”. The seller is “toolmannmachinery” and is located in Oshkosh, Wisconsin. This item can be shipped to United States.

• Brand: Ditron
• Type: Digital Readout
• Model Year: 2017
• Model: D60-3V
• Equipment Type: Milling Machine
• Equipment Make: Toolmic
• Compatible Equipment Type: EDM
• MPN: 0200-01
• Compatible Equipment Make: ACURITE

CNC Benchtop milling machine package. The CNC Benchtop Mill is a complete milling machine package. Advanced motion controller and the. Precision ground bedways, bipolar drive electronics for 40% more power, and high torque. Motors on all axes provide unmatched quality and performance. 3/8 End Mill Holder with Spindle Bar. 4 Jaw Hold Down Set. Standard Hold Down Set. 1/4 Drill Chuck & Drawbar. (Extended Mill also includes Mill Headstock Spacer). Engineering Quality CNC Components and Systems Since 1985. 2117 Barrett Park Drive. The item “CNC Benchtop Milling System Package In Stock NEW with Warranty” is in sale since Thursday, January 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “microkineticscnc” and is located in Kennesaw, Georgia. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• MPN: 999-6110-008

This Listing is for a. With Electric Motor for Head Positioning, No more cranking the head up and down by hand! And X Axis Table Power Feed Included – BE SURE TO NOTICE THESE WHEN YOU COMPARE, OTHERS DO NOT HAVE THESE FEATURES. Here are some features of this milling machine. Quill Depth DRO, R8 Spindle Taper. Different packages available to meet user’s. Class 5 high precision spindle bearings. Generous table size and travel in a compact machine. Solid Dovetail Way Column for high rigidity and precise up and down. Easy speed changes, no need to open any covers and change belts. Just stop, flip a lever, and go. Very Solid cast iron head and body make deeper cuts no problem. Head tilts 90 degrees left and right for angled cutting. Oil Filled gearbox in head for long life. Ears in head for long life. Adjustable tapered gibs and backlash to keep the machine tight and. Precision Matthews 3-Axis Digital Readout. So with this machine, you will receive. Z Axis / Head Electric Motor for head positioning. X Axis Table Power Feed. Quill DRO is built in. Cast Iron Stand/Base as pictured. Precision Matthews 3-axis Digital Readout. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table T-Slot Size and Number. Table Travel, X Axis. Table Surface Height from floor. 34-3/4 With base flat on. Base Dimension at floor. 18-5/8″W x 27″D. Normal Working Max Height: (top of column travel motor). Height with head all the way up: (top of main motor). Stand (Base) height, to machine mounting surface. Cross Travel, Y Axis. Distance Spindle to Table. With 7/16-20 drawbar thread U. Side To Side, 90 Degrees. Some other similar machines will say. That they are 2HP, but its the SAME exact motor as this one, just rounded. Up to 2hp and marked that way, we prefer to be honest and mark it as. What it really is, which is 1.5HP. More than enough power for. Fine Grain Cast Iron. With Base, 850 Without Base. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL MILLING MACHINE with3AXIS DRO X-AXIS PWR FEED 3YR WARRANTY” is in sale since Wednesday, May 24, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Make: Precision Matthews
• Model: PM-932M w/PM-3ax & PM-932M-CASTSTAND
• Type: Manual, Vertical
• Model Year: 2017
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5

This Listing is for a. THE PICTURES DO NOT SHOW IT BUT IT COMES INSTALLED ON THE MACHINE! 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Here are some features of this milling machine. Hardended and Ground Steel Gears in head for much heavier cutting capacity compared with plastic gear equipped models. Compact size for smaller workshops, but has more power to remove material when needed. 001 on X and Y with a true inch pitch. Main column is attached to the base with 4 bolts from the top, with a very wide mounting surface for much more rigidity over other models in this size range. Only requires 120 volt single phase circuit so it can be set up virtually anywhere, without needing additional circuits installed in your workshop. Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearing. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed. For Table, Head, Quill. Easy Reading Dials Have Satin Chrome Finish. Quill DRO is Standard. Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4 Spindle To Table Max Distance for taller work. 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 27-1/2 x 7-1/. Max Distance Spindle To Table 18-1/4. Range of Spindle Speeds. Headstock Tilt Left & Right ±90°. Net Weight (Not Including Base). Power Requirements 120V, 10 Amps. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE With3 AXIS DRO INSTALLED, 3YR WARRANTY” is in sale since Wednesday, March 29, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-727-M w/3axis DRO
• Country//Region of Manufacture: China

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Monday, February 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

This Listing is for a. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Here are some features of this milling machine. Hardended and Ground Steel Gears in head for much heavier cutting capacity compared with plastic gear equipped models. Compact size for smaller workshops, but has more power to remove material when needed. 001 on X and Y with a true inch pitch. Main column is attached to the base with 4 bolts from the top, with a very wide mounting surface for much more rigidity over other models in this size range. Only requires 120 volt single phase circuit so it can be set up virtually anywhere, without needing additional circuits installed in your workshop. Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearing. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed. For Table, Head, Quill. Easy Reading Dials Have Satin Chrome Finish. Quill DRO is Standard. Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4 Spindle To Table Max Distance for taller work. 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 27-1/2 x 7-1/. Max Distance Spindle To Table 18-1/4. Range of Spindle Speeds. Headstock Tilt Left & Right ±90°. Net Weight (Not Including Base). Net Weight (With Base). Power Requirements 120V, 10 Amps. Dimensions (Assembled) 39″W x 78″H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Wednesday, January 25, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Make: Precision Matthews
• Model: PM-727-M with stand
• Type: Manual, Vertical
• Model Year: 2015
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Friday, January 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

It is bolted to a skid, oiled, bagged in plastic and covered in protective cardboard. Remanufactured Bridgeport Milling Machines with 42″ Table, 48″ Table also available price adjusted accordingly. Highest Spindle Speed (RPM). For more than 60 years, the Bridgeport Series I Standard Mill – the original, all-purpose mill – has been the “real thing” in milling, drilling, and boring for metalworking shops throughout the world. Today, the Series I Standard continues to fulfill the industry’s need for an accurate, reliable, and versatile mill. The Series I Standard features an innovative airflow cooling design that uses no external fans to prolong bearing life and prevent expansion from heat build-up. A full range of accessories are available, including optional chrome-plated ways and gibs to ensure that the machine will last a lifetime. 18.75 (476 mm). 6.75 (171 mm). 42 x 9 (1245 x 299 mm). T Slot center distance. 0.625 (16 mm). Height Above Floor Max. 47.25 (1200 mm). Weight of Workpiece Max. 750 lb (340 kg). 3 hp (2.2 kW). 2 hp (1.5 kW). Power Quill Feed 3. 3/4 (19 mm) Mild Steel. 6 (152 mm) Mild Steel. 1.875 in (48 mm). 3.375 (86 mm). 60 – 500 rpm. 0.0015/rev (0.038 mm). 0.003″/rev (0.076 mm) 0.006″/rev (0.152 mm). 8.2 x 5.3 ft (2.5 x 1.6 m). 7.04 ft (2.15 m). Please feel free to call at any time Monday – Sunday 7:00am – 5:00pm EST. If we do not answer please kindly leave a detailed message. We will return all messages by the next. 2 HP Vari Speed Head. 1 Shot Lube System. We will assist you in any reasonable way to help get your items to your destination, Thank You. The item “Bridgeport Milling Machine with 42 Table & 2hp Vari Speed Head, 1 Year Warranty” is in sale since Friday, January 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “guerreramachinecompanyllc” and is located in Watertown, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply