feed Subscribe to feed
pic
28. 11
2017

Swiss Sixis 101 Universal Milling Machine

Written by: admin - Posted in: Uncategorized - Tags: , , , ,


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


Swiss Sixis 101 Universal Milling Machine


This machine would be great for someone who is in the jewelry or horology field or even someone making high precision small instruments. Here is a description of the machine on Lathe Archives: Sixis 101 Designed for the precision machining of small components used in the instrument, watch, jewellery and similar industries, the Sixis 101 was a superbly made miniature universal miller capable, in the right hands, of the finest quality work. Like the better known and very similar (but rather lighter and smaller) Aciera F1 it is not as big as photograph might suggest and, even allowing for the full extent of the table’s travel and the length of the operating handles, it is possible to mount and work one within a space equal to a square with a side length of little more than 24 inches (580 mm). With its cast-iron base plate the (58 kg/127 lbs) machine could be either bench mounted or fitted to the maker’s heavy 60 kg (130 lbs) cabinet stand that was neatly arranged inside to hold a range of accessories. Consisting of a motor, a smooth-running 3-step flat pulley and a 2-speed gearbox, the drive system was arranged as a neat, integral unit and able to power the spindle in either a horizontally or vertical position (although in the latter case a support casting part number 211 was necessary) with a total of six speeds that spanned 125 to 4000 rpm. However, these speeds were not fixed, the factory being able to vary the speed range according to a customer’s requirements by fitting different pulleys – although the gearbox speed range always remained unchanged. The options available were: Geared speeds: 125, 250, 500, 1000, 2000 and 4000 rpm Direct (belt) drive: 1000, 2000 and 4000 rpm 2000, 4000 and 6000 rpm 6000, 8000 and 10000 rpm 9000, 12000 and 15000 rpm Two T-slotted tables were offered: a plain right-angle type and a useful swivelling, tilting and inclinable version both of identical size at 200 mm x 600 mm. The table feed screws were hardened and ground and (on the example used by the writer) ran through backlash-adjustable bronze nuts; each axis was also fitted with a lever feed, the very sensitive feel obtained through the long (adjustable) activating arms being considered an advantage when machining delicate jobs. The length of both the longitudinal and vertical feeds was just under 6 inches (150 mm) and the traverse a little less than 4 inches (100 mm). Large and clearly engraved micrometer dials were fitted, graduated in intervals of 0.001″ on the longitudinal and traverse feeds and at intervals of 0.0005″ on the vertical. All feeds were by hand, there being no provision for a power fitting, though rumors persist of one offered by a third-part supplier and not included in the main catalogue. Unfortunately, and a surprising omission on a machine developed for ultra fine work of a complex nature, the vertical head had no quill movement, either fine or quick-feed. Consequently, all vertical travel had to originate from the knee – a serious inconvenience when the need arose to drill or machine downwards along an inclined axis. The direct competitor to the Sixis 101, the Aciera F1 did offer such a fitting (part 01-87-1504-01) and it is just possible that Sixis did too, but no details have come to light. The collet fitting was the popular and easily-obtained Schaublin type W12.. It runs on a VFD using 110V and is in good working condition. After refurbishing the machine I have never used it so after moving it twice I have decided to sell it (the cosmetic scratches came from moving). The machine will be ready to be picked up on a pallet and all accessories packed in boxes. The item “Swiss Sixis 101 Universal Milling Machine” is in sale since Friday, November 17, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “allennvalerie” and is located in New Braunfels, Texas. This item can’t be shipped, the buyer must pick up the item.

  • Brand: Sixis
  • MPN: Does Not Apply
  • Bundle Listing: No
  • Country/Region of Manufacture: Switzerland
  • Model: 101
Tags: , , , ,

No Comments

No comments yet.

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Search this blog

Tag cloud