Machining custom XRD sample holders – YouTube. It got light use and was eventually leased to another machine shop briefly before making its way to me. It’s been installed in my home garage for the last 4 years and runs beautifully even on single phase power. It’s gotten fewer hours in the last four years than most Haas mills get in their first month on the floor so you can expect many years of operation. 40″ x 20″ 16 Z travels. 57 x 14.5 table. 6000 RPM spindle 7.5 hp. 10-position automatic tool changer. The machine has many of the most popular Haas options. Renishaw tool and spindle probe. Measures the length AND diameter of tools very precisely and completely automatically! The spindle probe is usually used for picking up work offsets, but can do so much more. Need a bore machined precisely withing 0.0005? The probe can measure it after machining and adjust the offsets for the tool before final boring! Watch some videos on this thing. It’s also completely wireless. Upgraded high-flow coolant system with 0.75 hp pump motor I have the original coolant system too. It’s never been used as it’s way too small. Chip auger I thought this was excessive until the first time I ran more than a few parts. It’s a life saver! Rigid tapping I use roll form taps almost exclusively and haven’t broken one yet. It will also peck tap if you have only a traditional tap. High-speed machining The machine didn’t have this when I first got it, but after I got into better CAM software, the benefits were obvious. I don’t even consider this optional anymore. The battery backup has been replaced with the Haas, dual-battery holder so you should never have to worry about losing memory again. Visual Quick Code programming interface (I only like it for the probing cycles it offers). Spindle orientation I’ve never used this myself, but coupled with a right-angle head, driven or air powered, you’ve got an extra positioning axis for 3+1 or 3+2 if you add a rotary. Coordinate rotation and scaling (cool way to adjust the movements to match the orientation of the part if you’ve got something hard to orient precisely like a plate with two holes in it). I added a Redbone Tool coolant ring. This thing is awesome. I had been twiddling with coolant lockline during machining constantly. I installed this about 6 months after I bought the mill and haven’t touched a coolant nozzle since then. THE HRT 160 ROTARY IS OPTIONAL. It is available separately. Vises, fixtures, chucks, tooling, and hand tools are not included. The hand tool rack is included. Listed for sale locally and offered subject to prior sale. The item “Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready” is in sale since Sunday, April 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ks-analytical” and is located in Aubrey, Texas. This item can’t be shipped, the buyer must pick up the item.

• Model: TM-3P
• Country/Region of Manufacture: United States
• Spindle Horsepower: 7.5
• Machine Type: Milling Machine
• Table Length: 10 in – 14.9 in
• Max Spindle Speed (RPM): 6000
• Model Year: 2012
• Power Source: Electric
• X-Axis Travel Bed: 36 in – 40 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 16 in – 20 in
• Function: boring
• Brand: Haas
• Table Width: Over 40 in
• Control: CNC
• Voltage: 230 single phase

Bridgeport vertical milling machine. Series I, 2 HP, 9″ x 42″ T-slot table, 2- axis DRO. The item “Bridgeport vertical milling machine” is in sale since Thursday, May 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “107eastwood” and is located in Michigan City, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Machine Type: Vertical Milling Machine

Spindle Nose to Table…………………………………………………….. 20-Position Programmable Coolant Nozzle. Coordinate Rotation & Scaling. Coolant Pump & Tank. ONLY 1324 Original Spindle Hours. Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. All items are subject to prior sale. Established 2009, 520 Machinery Sales is a full service machine tool distribution company servicing the Northern Illinois territory for new equipment and across the nation for Used Equipment. We have recently opened a satellite office in Phoenix AZ for Used Equipment sales. 520 Machinery Sales consists of a 30 person team; which includes two office administrators, eight new equipment sales professionals, ten Used Equipment sales professionals, ten Service and Application Engineers including a dedicated Parts Manager. Also, included is an automation specialist for robotics and custom applications. Our service personnel are involved in factory training including both Fanuc and Mitsubishi programming. Our locations include a 10,000 sq. Office and showroom in Schaumburg along with an additional 5,000 sq. Used Equipment Center also located in Schaumburg and a 2000 sq. Sales office in Phoenix. We have been awarded with winning Service and Sales achievements in 2017 and have achieved builder sales quotas in all years since 2010. Product offerings include: Samsung Machine Tools, Muratec Machinery, Tornos, Milltronics Machinery along with various machine tool accessory offerings. Our company mission is to support our customers by providing superior products and services of exceptional value which help them gain competitive advantage in their market. 520 Machinery Sales strives to provide the highest standards of service available through our highly trained sales and service personnel. We provide work environments where our employees can meet their potential and thrive in an atmosphere of excellence. We strive to exceed the industry standard in service to customers while maintaining a superior level of integrity in interactions with business partners and associates. 520 Machinery Sales appreciates our achieved success and conduct our business as model corporate citizens. John Schneider; Co-Owner of 520 Machinery Sales. With 24 years of machine tool sales history and previously worked for family business of a contract machining company. Everett Dahlberg; Co-Owner of 520 Machinery Sales. With over 25 years of sales history with over 20 years of machine tool sales experience. Dave Fahlgren; Co-Owner of 520 Machinery Sales. With 15 years of machine tool sales experience. Wes Kowalczyk: Over twenty years of machine tool sales experience and joined the 520 sales staff in 2011. Mike Land- 30 years of machine tool sales experience and joined the 520 sales staff in 2015. Dan Anderson- 20 years of machine tool sales experience and joined the 520 sales staff in 2019. Brian Doherty- Has ten years of industrial sales experience and joined the 520 sales staff in 2015. In addition to our new sales team, 520 machinery has a 9 person strong used equipment team. The used equipment team helps to generate new equipment sales through various outlets not traditionally used for new equipment. The inside sales role of 520′s used equipment team is something that sets 520 apart from our competition. The used equipment team is as follows. Mark Lipowski- used equipment manager, 20+ years in used equipment sales. Bob Nelson- 20+ years in used equipment sales. Cris Mulvihill- 20+ years in used equipment sales. Jason Stob- 11+ years in used equipment sales. Nate Parker- 10+ years in used equipment sales. Brian Foerster- 5+ years in used equipment sales. Zeno Molteni- 5+ years in used equipment sales. Kurt Dahlberg- 3+ years in used equipment sales. Our company philosophy has and will be to maintain the highest degree of integrity along with a teamwork mentality when working with customers, builders and vendors. We are financially strong and we pride ourselves on our ability of making payments in a timely manner. Data base of northern Illinois territory with Sales Force as the CRM. Aggressive marketing campaigns consisting of cold calling, direct mailings, mass e-mails, websites, trade association involvement and telemarketing. Our used equipment staff has been trained to augment our new equipment sales by offering trade-in programs, often times with other machine tool distributors all across the country. The item “Used 2012 Haas VF-4SS CNC Vertical Machining Center Mill WIPS Probing 12k RPM CT” is in sale since Thursday, November 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “520machinery” and is located in Tampa, FL. This item can’t be shipped, the buyer must pick up the item.

• Model: VF-4SS
• Modified Item: No
• Custom Bundle: No
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 12k rpm
• Model Year: 2012
• Power Source: Electric
• Type: CNC, Vertical
• Non-Domestic Product: No
• Function: Drilling
• Brand: Haas
• Control: CNC

Bridgeport Vertical Milling Ram Type Machine. 80 – 135 – 210 – 325. 660 – 1,115 – 1,750 – 2,720 RPM. 220V / 440V / 3Ph / 60Hz. 58LR x 60 FB x 80 H. Cash, wire transfers, or company checks are welcome and encouraged. This guarantee applies only to machines, which we own. Shall not be responsible for any damages done by truckers, riggers, or other parties. All machine prices include loading unless otherwise stated. Machinery descriptions are intended as a guide only and their accuracy is not guaranteed. There are no warranties which extend beyond the description of the face hereof. Quotations subject to change without notice. It is the buyers and users responsibility to provide proper safety devices, training and equipment to safeguard the operator from harm for any particular use, operation or set up, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. The item “Bridgeport Vertical Ram Type Milling Machine, 9 x 36 Table ID# M-079″ is in sale since Tuesday, January 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “energ_machinery” and is located in East Hampton, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Model: J-Head
• Brand: Bridgeport
• Ram Travel: 12″

Milling Machine power feed units – X-axis, Y-axis and Knee Z-axis motors – note that the Z power feed has a more powerful motor than either the X or Y axis power feeds. Fittings suit standard bridgeport – many brideports are 40 years old and have been adapted over the years – so may need adaptation to suit your bridgeport or to suit a brideport clone or other milling machines. Be prepared to use a lathe to adjust the shaft diameter – or to make a collar for the shaft at the end of the drive screw – so that the diameter is correct for the bevel gear of the new motor unit. Note: the unit is powered from the 100v/110v transformer. If your machine has been modified and no longer has a 100v/110v output then you will need a separate 100 volt or 110 volt transformer. (The unit can not be powered from the 240 volts mains, or directly from the 440v 3-phase input). Can be collected from Nottingham. I have found Malta and Croatia expensive for couriers. The item “Power Feed for Bridgeport Milling Machine” is in sale since Wednesday, April 3, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment”. The seller is “3977colin” and is located in Nottingham. This item can be shipped to European Union member countries, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bolivia, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Cambodia, Saint kitts and nevis, Liechtenstein, Macao, Monaco, Martinique, Nicaragua, Pakistan, Peru, Paraguay, Turks and caicos islands, Aruba, Saudi arabia, United arab emirates, Chile, Bahamas, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

• Non-Domestic Product: No
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• MPN: Does Not Apply
• Brand: ALSGS

Total weight is 870 lbs. Table has 3 slots and is 25″ lg and 6 1/6″ wide. There are 32 speed. Selections from 110 to 1850 rpm in clockwise & counterclockwise rotation. The table feeds in. Both directions from 1/8″ to 13″ per min. Longitudinal feed is 14″, transverse is 5 1/2″ and. Vertical is 13 1/4. Maximum distance from the table to the center of the spindle is 12. This includes the arm support and spindle. The item “Hardinge TM-UM Horizontal Universal Mill” is in sale since Tuesday, May 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pwpeterson69″ and is located in New Richmond, Wisconsin. This item can be shipped to United States.

• Model: TM UM
• Country/Region of Manufacture: United States
• Spindle Horsepower: 1 hp
• Machine Type: Horizontal Milling Machine
• Table Length: 25
• Power Source: Electric
• Function: Milling
• Brand: Hardinge
• Table Width: 6.1
• Control: Manual
• Voltage: 220 V

Atlas Model 7B 7 inch Metal Shaper with Stand. My friend would like to sell it and used it for a few jobs years ago. Just wanted to share what what I was told. The item “Atlas Model 7B 7 Metal Shaper with Stand” is in sale since Tuesday, May 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rocksinhed” and is located in Tucson, Arizona. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Model Year: Unknown
• Machine Type: Shaper
• Voltage: 120 V
• Power Source: Electric
• Spindle Horsepower: Less than 1 hp
• Control: Automatic

VERTICAL SLIDE VICE / DRILL PRESS VICE. HORIZONTAL AND VERTICAL GROOVED VEE ON MOVEABLE JAW. MOUNTING SLOTS 45MM ACROSS BETWEEN CENTRES. 3 SLOTS ON EACH SIDE 25MM BETWEEN CENTRES. The item “RDGTOOLS VERTICAL SLIDE VICE DRILL PRESS VICE STEEL ENGINEERING WORKSHOP” is in sale since Thursday, February 1, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford
• Type: Manual, Horizontal

ER 32 3MT COLLET CHUCK. THIS QUALITY MADE ONLY FOR RDGTOOLS. THREADED 12MM FOR DRAWBAR. TAKES STANDARD ER32 COLLETS. OR SEE OUR OTHER 6000 ENGINEERING TOOLS. The item “RDGTOOLS ER32 COLLET CHUCK 3MT MT3 TAPER MILLING MACHINE” is in sale since Thursday, September 15, 2011. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

2015 Haas VF2 Vertical CNC Machining Center. Currently under power running production – hours will increase. Power On Time – 7725. Cycle Start Time – 4548. Feed Cutting Time – 3553. 30″ x 16″ x 20 Travels. 30hp 8100 RPM Inline Direct Drive Spindle. 20 Station Automatic Tool Changer. 15 Color LCD Controller. 55 Gallon Flood Coolant System. Options on this machine. 300psi Through Spindle Coolant. Wireless Intuitive Probing System – Tool and Part Probing. Haas HRT-210 Rotary Table. 100 Deg Per Second. Machine only used to cut aluminum. Does not include “Chip Trap”. Does not include any tools or tool holders other than the Probe System. Does not include fixture plate currently on rotary. Machine is available for in person inspection or via facetime. The item “2015 Haas VF2 CNC with HRT210 Rotary Probe 20 ATC 4th Axis Auger P-Cool 300PSI TSC” is in sale since Thursday, May 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “darkstormindustries” and is located in Oakdale, New York. This item can’t be shipped, the buyer must pick up the item.

• Model: VF2
• Spindle Horsepower: 30 hp
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 8100
• Model Year: 2015
• Power Source: Electric
• X-Axis Travel Bed: 30.0″
• Y-Axis Travel Bed: 16.0″
• Z-Axis Travel Bed: 20.0″
• Spindle Taper: CAT 40
• Brand: Haas
• Control: CNC
• Voltage: 220 V