Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Protected by one or more US patents. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in this country: US. This item can be shipped to United States.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill
• Brand: Edge Technology
• UPC: 738435265885

Here is a Nasa Producer 5-axis CNC bridge type machining center. The control is a Fagor 8055MC with firmware for up to 7-axis simultaneous interpolation. It has RS232, ethernet, and linear flash program storage. It has Fagor FXM AC servos. The spindle is a Precise 4082. Max rpm is 40K. The spindle is a HSK-E25. It uses ATC4-E25-16 tool holders with SRP16 collets. The table is 25.6″ X 21.6″. Travels are 30″ table and 20″ bridge. The height under the bridge is 10. It has a 16 position tool changer. The tilting rotary table is a Yuasa. It has a standard Hardinge 2 3/16-10 threaded spindle with a 5C collet holder. It comes with a chiller for the high speed spindle. I have also included a small 240/480 transformer for testing purposes. The Fagor drives require 480v 3-phase and the rest of the machine uses 240v 3-phase. The included transformer isn’t large enough for full drive power. The footprint of the machine is 6 ft x 6 ft including the pendant. It fits under an 8 ft ceiling and will go through a 7 ft garage door with the Z axis motor removed. It weighs 6000 lbs. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “9warren9″ and is located in this country: US. This item can be shipped to United States.

• Machine Type: Machining Center
• Function: Milling
• Control: CNC

Milling Machine Accessory – Right Angle Attachment R8 fits Bridgeport. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078″) WHAT YOU’LL RECEIVE Right angle attachment, R8 stub arbor, Drawbar extension socket, 7/16-20 bolt with 1/2″ hex head Wooden box. If You have any questions regarding this item, please let us know we’ll be happy to help. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in this country: US. This item can be shipped worldwide.

• Brand: GemPower
• MPN: G102-R8
• Model: G102-R8
• Country/Region of Manufacture: Taiwan