Used 2001 Okuma ES V3016 CNC Vertical Machining Center. What u see is what u get all in good working order works as should spindle bearings quiet axis bearing quiet…. NO TOOL HOLDERS OR VISES included. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “geothom-13″ and is located in this country: US. This item can be shipped to United States.

• Non-Domestic Product: No
• Spindle Horsepower: 15 hp
• Machine Type: CNC Lathe Turning Center
• Power Source: Electric
• Custom Bundle: No
• Make: Okuma
• Modified Item: No
• Brand: Okuma
• Function: Drilling
• Model Year: 2001
• Type: CNC, Vertical
• Control: CNC
• Voltage: 220 V
• Model: ES V3016

Sherline 5400 Mini Deluxe Mill Milling Machine Bench Top w/ Stepper Motors. This listing is for a Sherline Table Top Milling Machine. Model: 5400 Specifications: Brand: Sherline Type: Mini Milling Machine Condition: Used RPM: 70 to 2800 RPM Travel: 8.65″ (X), 5.00″ (Z), 6.25″ (Y) Max Clearance (Table to spindle): 8″ Spindle Nose Taper: #1 Morse Table: 2.75″ x 13″ Electric: 115V, Single Phase Weight: 36.5 LBS Includes all accessories as pictured including milling vice. The unit has 3 stepper motors installed on each axis. It does not include the unit that these 3 motors plug into and that will need to be sourced separately. Main spindle tested and runs great. Please inspect picture carefully as only what’s pictured is included with the mill. Get images that make Supersized seem small. Showcase your items with Auctiva’s. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dockguys” and is located in this country: US. This item can be shipped worldwide.

• Brand: Sherline
• Country/Region of Manufacture: United States
• Function: Milling
• MPN: 5400
• Machine Type: Mini Milling Machine
• Max Spindle Speed (RPM): 2501 – 3000
• Model: 5400
• Power Source: Electric
• Table Length: 10 in – 14.9 in
• Table Width: Less than 10 in
• Voltage: 110 V
• X-Axis Travel Bed: Less than 10 in
• Y-Axis Travel Bed: Less than 10 in
• Z-Axis Travel Bed: Less than 10 in

Hurco cnc mill Dual Screen Monitor With Wire Harness. Hurco cnc mill parts Electronic. This was removed from a working cnc milling machine. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pnc_linda” and is located in this country: US. This item can be shipped to United States.

• Brand: Hurco
• Function: Milling
• Control: CNC

This is a high-quality C2 universal head suitable for most milling machines with J head milling machine RAM adapter M1187 milling machine parts. Material: high quality metal Model: M1187 Bottom diameter: 190mm Height: 225cm Detailed other dimensions are shown in the figure Packing size: 30.533.526CM Gross weight: 13KG Net weight: 11kg. High Quality J Head Milling Machine RAM Adapter Milling Machine Metal M1187 USA. Top Quality Bridge Port Type Mill Part, J Head Milling Machine Ram Adapter M1187. This Is a High-quality C2 Universal Head Suitable for Most Milling Machines with J Head Milling Machine Ram Adapter M1187 Milling Machine Parts. Material: High Quality Metal. Detailed Other Dimensions Are Shown in the Figure. Packing Size: 30.533.526cm. 1x M1187 J Head Milling Machine Ram Adapter. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. J Head Milling Machine RAM Adapter. Adjust the head angle. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “auto-parts-stations” and is located in this country: US. This item can be shipped to United States.

• Material: high quality metal
• Model: M1187
• Bottom diameter: 190mm
• Height: 225cm
• Packing size: 30.5*33.5*26CM
• Gross weight: 13KG
• Net weight: 11kg
• Machine Type: J Head Milling Machine RAM Adapter
• Function: Adjust the head angle
• Brand: Unbranded

USED, PILE OF VARIOUS SCREW JACKS AND PARTS OF SCREW JACKS. THERE ARE SEVERAL BRANDS AND SOME SHOP MADE JACKS. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. THE LISTING IS FOR ALL OF THE PIECES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “h.resale_llc” and is located in this country: US. This item can be shipped to United States.

Alliant Milling Machine X & Y Screw & Bracket/ End Cap. The screw is approximately 52 1/2″ long, and 26″ long. You will receive everything shown in the pictures. Check out my other listings as well. Thank you for looking at my listing. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mattpokerpro7750″ and is located in this country: US. This item can be shipped to United States.

• Machine Type: Milling Machine

The Fanuc Robodrill Alpha-T10B CNC Drilling & Tapping Machine is in good working condition. Please call for more details or to see the machine working under power. X-AXIS: 19.7″ Y-AXIS: 14.96″ Z-AXIS: 11.81. SPINDLE SPEED: 8,000 RPM SPINDLE TAPER: #35 TOOL CHANGER: 10 ATC. TABLE LOAD: 328 LBS. MACHINE WEIGHT: 3,747 LBS. EQUIPPED WITH: FANUC 16M CNC CONTROL. PLEASE CALL TO DETERMINE A SPECIFIC MACHINE’S LOCATION. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “preciseinc” and is located in this country: US. This item can be shipped to United States.

• Function: Drilling
• Brand: FANUC
• Control: CNC
• Machine Type: Machining Center
• Model: Alpha-T10B
• MPN: 75106

2002 Hurco VMX-42 VMC. UlitMAX CNC Control With Dual Screens. Travels: 42″ x 24″ x 24. 24 Station Sidemount Tool Changer- Dual Arm. Industry Standard NC. Spindle Hour Meter: 5,647. Note: Machine vises and tool holders are not included. Please inquire with any questions, etc. Thank you, VIP Machinery. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ttbomb98″ and is located in this country: US. This item can be shipped to United States.

• Brand: Hurco
• Function: Drilling, Milling
• Model Year: 2002
• Control: CNC
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 7501 – 10000
• Model: VMX-42
• Spindle Taper: CAT 40

[Milling Machine Table Size]: Milling machine table size: 8.6 x 4 (inches); T-slot width: 0.5 inches; T-slot spacing width: 1.7 inches. The table has a longitudinal stroke of 3.5 inches and a vertical stroke of 4.7 inches [Material]: Built by heavy-duty cast iron material [Premium Quality Structure]: Trapezoidal thread spindle can be precisely adjusted; precise scale for better work; 2 chip flutes on the working surface [Wide Application]: This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pacificsale” and is located in this country: US. This item can be shipped to United States.

• Control: HFS
• MPN: MMCH-185X100MM

SURPLUS & MACHINERY SALES. 2002 HAAS SUPER MINI MILL CNC VERT. WHEN ITS GONE ITS GONE FIRST COME FIRST SERVE! LOCATED IN HOLLISTER CAATTENTION! Track Page Views With. Auctiva’s FREE Counter. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tjlisting2017″ and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 15 hp
• Non-Domestic Product: No
• Machine Type: Machining Center
• Power Source: Electric
• Custom Bundle: No
• MPN: 27982
• Modified Item: No
• Brand: Haas
• Function: Drilling, Milling
• Model Year: 2002
• Type: CNC, Vertical
• Control: CNC
• Voltage: 230 V
• Model: Super Mini Mill
• Country/Region of Manufacture: United States