One of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type. Can complete 2, 3, 4, 6, 8, 12, 24 division indexing. Are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers. The front of dividing head dimension. The tail of the dividing head dimension. Uantity of dividing plate’s hole Helical gear reduction ratio. 100% brand new, of good quality. Divide any angle by the direct, indirect or differential methods. Head stock swivels to all angles. Direct mounted index plate has 24 divisions. Headstock Taper: 7 B&S. Weight: 23 kg (50.7 lbs). Package Dimensions: 410235205mm (1698inch). 1 X Dividing Head Set. 3 X Dividing Plates. 1 X 125mm 3 Jaw Chuck. The item “BS-0 Precision Indexing Dividing Spiral Head 125MM 3 Jaw 5inch Chuck +Tailstock” is in sale since Thursday, November 15, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “quasolar” and is located in Rowland Heights, California. This item can be shipped worldwide.

• Brand: DC HOUSE
• MPN: L09010201030-1
• Model: Complete Dividing 5″ Head Set
• Manufacturer Part Number: Rener-09
• Type: CNC, Horizontal
• Herstellernummer: L09010201030-1

Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Description of the 65 mm 3 jaws Independent Chuck made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. The item “HORIZONTAL VERTICAL MILLING INDEXING 4/100 ROTARY TABLE & SMALL CHUCK 65MM 3JAW” is in sale since Saturday, August 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “easytools” and is located in INDIA. This item can be shipped worldwide.

• Bundle Listing: No
• Country/Region of Manufacture: India
• MPN: Does Not Apply
• Brand: Unbranded/Generic

THIS LISTING IS FOR ALL THE PARTS AS SEEN IN THE PICTURES, WHICH ARE BEING. THIS ITEM WAS ASSEMBLED WHEN I GOT IT, I TOOK IT APART TO RESTORE, SINCE THEN. IT LOOKS TO HAVE BEEN PROTECTED WITH SOME KIND OF GREASE OR? THE SPINDLE MOVES SMOOTH AND FREELY BUT TIGHT, MAY JUST NEED CLEANING. THE HAND CRANK HANDLE DOES NOT LOOK ORIGINAL AND UNIT DOES NOT MOVE. AS SEEN IN THE PICTURES THERE IS SOME LIGHT RUST. PLEASE MOUSE OVER THE PICTURES TO BE SURE THESE ITEMS WILL MEET YOUR NEEDS. The item “VAN NORMAN INDEXING / DIVIDING HEAD (FOR PARTS OR REPAIR)” is in sale since Thursday, December 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “inthespirit2009517″ and is located in Caledonia, Michigan. This item can be shipped to United States.

• Brand: VAN NORMAN

Willard indexer, everything shown. The item “Willard Indexing Milling Machine Machinist Tool Gear Cutting Vintage Machinist” is in sale since Friday, February 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “1966megahertz” and is located in Schuylkill Haven, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Brand: Unbranded
• MPN: Dividing head
• Country/Region of Manufacture: United States

One of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type. Can complete 2, 3, 4, 6, 8, 12, 24 division indexing. Are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers. The front of dividing head dimension. The tail of the dividing head dimension. Uantity of dividing plate’s hole Helical gear reduction ratio. 100% brand new, of good quality. Divide any angle by the direct, indirect or differential methods. Head stock swivels to all angles. Direct mounted index plate has 24 divisions. Headstock Taper: 7 B&S. Weight: 23 kg (50.7 lbs). Package Dimensions: 410235205mm (1698inch). 1 X Dividing Head Set. 3 X Dividing Plates. 1 X 125mm 3 Jaw Chuck. Lor: #999999; text-decoration-style: initial; text-decoration-color: initial;>. For more items and promotion disccounts! We appreciate your business and consideration. Our solar business has been established since 2002. OEM and ODM services are both available. We would like to be your best supplier. Please take our working time into account. Public holidays in China is not available for message reply. The item “Precision BS-0 5 Indexing Dividing Spiral Head 3-Jaw Chuck Tailstock Milling US” is in sale since Tuesday, July 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “ahatools” and is located in Rowland Heights, California. This item can be shipped worldwide.

• Brand: DC HOUSE
• MPN: L09010201030-1
• Model: Complete Dividing 5″ Head Set
• Manufacturer Part Number: Rener-09
• Type: CNC, Horizontal
• Herstellernummer: L09010201030-1

BS-0 DIVIDING HEAD PLATES MILLING SET TAIL HEAD STOCK. Product application Divide any angle by the direct, indirect or differential methods Product features 1. Made of high strength CF30 cast iron. Suitable for milling machine, clamp bed or other special machinery for quick and easy division. Direct indexing plate for 2,3,4,6,8,12,24 equal parts quickly split, with the honeycomb plate can also be divided into two parts ranging from 2-380. Adjustable tilt angle from 0-90 degrees. With honeycomb panels, can be divided into different parts to use. Can be attached to the three-jaw chuck, so shaft processing. Reduction ratio 1:40 Product description Center Height: 3.937″ Maximum retention:4.330″ Base Size:6.614″3.543″ chuck size:4.921. Item Included:(054008) A latch handle Top 1 Anti-claw 1 set Chuck 1 handle 1 clutch 1 sleeve 4 screws T-block 4 Honeycomb plate 2. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. The item “NEW Dividing Head Universal Indexing Head 0 5” Precision free shipping” is in sale since Thursday, May 31, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “quickerseller36″ and is located in Rancho Cucamonga, California. This item can be shipped to United States.

• Modified Item: No
• Custom Bundle: No
• MPN: 054008
• Brand: Unbranded/Generic
• Non-Domestic Product: No

Here is a nice. Dividing / Indexing Head with a tail stock and 2 dividing plates. The head accepts #4 morse taper chuck or center. The thread OD for mounting a jaw chuck is 2.675 x 5 TPI. The dividing plates are 7-1/2 dia. The height of the centers are 5-1/8. The center on the tail stock has some damage (see last pic). The head weighs 85 lbs and the tail stock weighs 24lbs. The base of the head is 6-1/4″ x 8″. It stands 8-1/2 tall from the base to to the top of the body. This is also listed for sale locally so the listing could end at any time. Check the pictures for condition as the items we sell are used and may have marks or blemishes. Check out the other items in our store at LnL Deals. The item “Dividing Indexing Head & Tail Stock, Milling, Machinist Tool, Index, Gear” is in sale since Tuesday, December 18, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lbkos14mvy” and is located in Elizabethtown, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Non-Domestic Product: No

Here is a nice Brown & Sharpe Dividing / Indexing Head. It accepts #4 morse taper. Included is a #4 MT chuck and dead center. The thread for mounting a chuck is 2-1/4 x 4-1/2 TPI. The face plate is 6-3/4″ and the dividing plate is 5″. The center height is a little under 5-3/16 (5.165). Check the pictures for condition as the items we sell are used and may have marks or blemishes. Check out the other items in our store at LnL Deals. The item “Brown & Sharpe Dividing Indexing Head Milling Machinist Tool Index Gear” is in sale since Thursday, November 22, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lbkos14mvy” and is located in Elizabethtown, Pennsylvania. This item can be shipped to United States.

• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Non-Domestic Product: No
• Brand: Brown & Sharpe

With 100 mm Self Centering Chuck, Backplate. Tailstock for HV4 and HV6, Indexing Plate Set & clamping kit. Rotary Table HV4 with 100 mm Self Centering Chuck & Backplate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Centre Bore of the Table MT2. Table Graduated 360 Degrees. Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 100 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Tailstock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “Rotary Table HV4+100mm Chuck+Backplate+Tailstock + Indexing Plate + clamping kit” is in sale since Thursday, August 3, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “zealfortools” and is located in DELHI, DELHI. This item can be shipped worldwide.

• Colour: Wrinkle Black
• Bundle Listing: No
• Model: HV4
• Country/Region of Manufacture: India
• MPN: Does Not Apply
• Brand: Unbranded/Generic

One of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type. Can complete 2, 3, 4, 6, 8, 12, 24 division indexing. Are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers. The front of dividing head dimension. The tail of the dividing head dimension. Uantity of dividing plate’s hole Helical gear reduction ratio. 100% brand new, of good quality. Divide any angle by the direct, indirect or differential methods. Head stock swivels to all angles. Direct mounted index plate has 24 divisions. Headstock Taper: 7 B&S. Weight: 23 kg (50.7 lbs). Package Dimensions: 410235205mm (1698inch). 1 X Dividing Head Set. 3 X Dividing Plates. 1 X 125mm 3 Jaw Chuck. The item “Bs-0 Semi-Universal Quick Dividing Indexing Head With Tail Stock For Cnc Mill” is in sale since Tuesday, April 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “goodenergytools” and is located in Cranbury, New Jersey. This item can be shipped worldwide.

• Brand: DC HOUSE
• MPN: L09010201030-1
• Model: Complete Dividing 5″ Head Set
• Manufacturer Part Number: Rener-09
• Type: CNC, Horizontal
• Herstellernummer: L09010201030-1