Clemco Blast Light 100′ Cable New.

LED CNC Machine Working Light Tri-proof Explosion-proof Workshop Long Lathe Lamp 24V-220V 10W-25W. Waterproof explosion-proof, Dush-proof and anti high temprature oil. Use high-brightness LED chips, light attenuation slow, long life. Different sizes apply to different machines. Use aluminum alloy material, Surface anodic oxidation does not change color. Fine workmanship and good heat dissipation. 1 x LED Working Light. International Buyers – Please Note: a. Misused or abused merchandise will not be accounted as defective. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback.

Item: LED 3 Antis Machine Light. Material:Thicken high-quality aviation aluminum + tempered glass. IP grand: IP67 (Waterproof, Oil-proof, Dust-proof). Power:6W / 10W /12W / 16W / 20W / 28W / 30W. Installation:fixed by screws. Light angle: 120 °. Using high brightness LED chip technology, low light-declinig, long lifetime. They are provided with more superior performance than traditional halogan lamps. Drive using high quality components, no strobe, large margin. Protection level up to IP67. Suitable for working environment exposed to water, fog and oil. High-strength tempered glass can withstand higher impact force without damage to the luminous surface. 360deg rotating bracket design which can change the irradiating angle to an ideal state. With integrated design, alloy aluminum, surface anodized without discoloration, fine workmanship, good heat disspation performance.

This is a USED Lagun Variable Speed Milling Machine that is made in Spain & Serial Number is SE-20645. It has a 10″x44″ table, R-8 spindle with 16″ of cross travel, 24″ of longitudinal travel, 16″ of knee travel & 5″ of quill travel. Head will tilt to the right & left 90°, then forward & back 45°. Then it has three 5/8 T-Slots & dials that read in. Includes a 6 vise, Servo table feed which does not work, but can be repaired. Also includes one-shot lube, work light, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″ R8 collets & a 1″ endmill holder. It has a 3 H. Motor that is 208/220/440-volt & weights in around 2400 lbs. Ever in the Toledo Ohio area? E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call!

USED, WORKING, AJUSCO LAMP. THERE ARE MEASUREMENTS IN THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

Item: LED 3 Antis Machine Light. Material:Thicken high-quality aviation aluminum + tempered glass. IP grand: IP67 (Waterproof, Oil-proof, Dust-proof). Power:6W / 10W /12W / 16W / 20W / 28W / 30W / 40W. Installation:fixed by screws. Light angle: 120 °. Using high brightness LED chip technology, low light-declinig, long lifetime. They are provided with more superior performance than traditional halogan lamps. Drive using high quality components, no strobe, large margin. Protection level up to IP67. Suitable for working environment exposed to water, fog and oil. High-strength tempered glass can withstand higher impact force without damage to the luminous surface. 360deg rotating bracket design which can change the irradiating angle to an ideal state. With integrated design, alloy aluminum, surface anodized without discoloration, fine workmanship, good heat disspation performance. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cncparts2019″ and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Wattage: 24V-36V
• Voltage: 40W long 1250mm
• Country/Region of Manufacture: China
• Brand: JIUJIA
• Material: high quality aluminum + tempered glass
• IP grand: 67
• Energy Star: A+
• Feature: Creative Design，Durable Material，Beautiful Appearance
• Feature 1: Easy installation,Convenient Use,Easy Operation
• Color Temperature: white light 6000-6500K
• Features: Waterproof, oilproof, dustproof,Explosion-proof
• Type: CNC Machine Industrial LED Light Work Light
• Light Source: fluorescent light / LED light
• Installation Type: Screw mounting
• Surface temperature: <50 °C
• Suitable For: CNC Lathe Machine,Milling Machine,Industrial Light
• EC Range: A+++ – G

12W LED Lathe Lamp Adjustable Arm Working Light For CNC Milling Machine Application area: Used for lighting on lathes, grinders, milling machines, turning machines, CNC machining centers, etc. 1The road alloy lamp holder is high-strength, corrosion-resistant, rust-proof and durable. 24 optional joints control the direction of rotation, which can realize lighting in various directions. 3The lamp holder has 12 built-in LED lamp beads, which can provide 800 lumens of brightness. Jewelry Design & Repair. Digital Readout& Linear Scale. Welding & Soldering Tools. Rosin Heat Press Machine. 12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine. 12W LED Lathe Lamp Adjustable Arm Working Light For CNC Milling Machine. Used for lighting on lathes, grinders, milling machines, turning machines, CNC machining centers, etc. Mounting hole size of the base. Number of lamp beads. The road alloy lamp holder is high-strength, corrosion-resistant, rust-proof and durable. 4 optional joints control the direction of rotation, which can realize lighting in various directions. The lamp holder has 12 built-in LED lamp beads, which can provide 800 lumens of brightness. And the service life is 50,000 hours. Has a light-gathering effect. The fixed bottom adopts a 45mm45mm threaded installation size, and must be installed with screws before use. (1) Aluminum alloy lamp holder, high-strength, corrosion-resistant, rust-proof and durable. Can be applied to various metal processing links. (2) 4 optional joints control the direction of rotation, which can provide spotlights in various directions. (3) The lamp holder has 12 built-in LED lamp beads, which can provide 800 lumens of brightness. (5) The fixed bottom adopts 45mm45mm threaded installation size, and screws must be used to install before use. Please see the details above. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control. We will reply you ASAP. Feedback, so that we can satisfactorily solve your concerns. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fasttobuy2012″ and is located in this country: CN. This item can be shipped worldwide.

• Voltage: 110 V
• Brand: TOAUTO
• Material: aluminum alloy
• Light source: LED
• Lamp voltage: 110V 60Hz /220V 50Hz
• Product power: 12W
• Protection level: IP65 (waterproof, dustproof)
• Number of lamp beads: 12 PCS
• Light brightness: 800 lumens
• Base: Four-hole fixing (45mm*45mm)
• Cable length: about 1.4 meters
• Flexible Gooseneck: 4 optional joints control the direction of rotation
• Used for lighting on: lathes, grinders, milling , turning machines, CNC machining
• Machine Type: Milling Machine
• Function: lighting
• Control: CNC
• Model Year: 2021
• Power Source: Electric

Item: LED 3 Antis Machine Light. Material:Thicken high-quality aviation aluminum + tempered glass. IP grand: IP67 (Waterproof, Oil-proof, Dust-proof). Power:6W / 10W /12W / 16W / 20W / 28W / 30W. Installation:fixed by screws. Light angle: 120 °. Using high brightness LED chip technology, low light-declinig, long lifetime. They are provided with more superior performance than traditional halogan lamps. Drive using high quality components, no strobe, large margin. Protection level up to IP67. Suitable for working environment exposed to water, fog and oil. High-strength tempered glass can withstand higher impact force without damage to the luminous surface. 360deg rotating bracket design which can change the irradiating angle to an ideal state. With integrated design, alloy aluminum, surface anodized without discoloration, fine workmanship, good heat disspation performance. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “burnerworld-2″ and is located in this country: CN. This item can be shipped worldwide.

• Power: 16W (24V~36V) length 580mm
• Country/Region of Manufacture: China
• Brand: Unbranded
• Machine Type: Milling Machine

Model number:Q1-60 Power:2W Length of the wire:0.5m. Light source:Patch 2835 LED Light body color:Black / White Buzzer:>95dB. Beam Angle(°):360 CRI (Ra):80 Lamp Luminous Efficiency(lm/w):80. Lamp Luminous Flux(lm):400 Input Voltage(V):DC 24V Light Source:LED. Working Time (hours):70000 Lifespan (hours):70000 Color Rendering Index(Ra):80. Unit Type: piece Package Weight: 1.1kg 2.43lb. Package Size: 20cm x 15cm x 10cm (7.87in x 5.91in x 3.94in). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “switchtools” and is located in this country: CN. This item can be shipped worldwide.

• Colour: Normal Light With Buzer (Q1-16 White)
• Installation Rod: 240mm L-Shaped Bracket
• Voltage: 220 V
• Model: China
• Machine Type: Milling Machine
• MPN: Q1-60
• Function: Milling
• Brand: Unbranded
• Control: Automatic, CNC

Brown sharpe #2 plain light type 10×45 milling machine. Nmtb 40 horizontal with arbor and original vertical head with parking attachment. Vertical Head runs fine has B&S 30 camlock holder one includes about 1/2. All speeds and 3 axis power feeds work fine including rapid traverse. Coolant pump works but is unwired as piping leaks. Table and ways decent for age. Backlash less that 1/4 turn. Some handles and pins have been replaced. Mill has dinges scratches and a couple layers of ugly paint. Missing a sight glass on feed box. Gears are pretty quiet. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Brown Sharpe #2 plain light type 10×45 horizontal vertical milling machine” is in sale since Monday, February 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Machine Type: Horizontal Milling Machine
• Brand: Brown & Sharpe