FOR THE 2 HP VARIABLE SPEED MOTOR USED ON BRIDGEPORT MILLS. THIS WILL WORK ON THE VAST MAJORITY OF THESE 2 HP MOTORS HOWEVER THERE ARE EXCEPTIONS. NOT FOR USE ON CNC! (WE CAN PROVIDE CNC SHAFTS ALSO). SEE THE OTHER QUALITY BRIDGEPORT PRODUCTS IN OUR STORE INCLUDING. REPAIR KITS, REPLACEMENT PULLEYS, BELTS AND CLOCK SPRINGS. We guarantee the items are exactly as said in description. Appreciates your business very much. The free listing tool.

OXMAN CNC Engraver Mechanical Kit-Ball Screw Driven with 2.2Nm Close Loop Motors. Terms of Sale (VAT). Return must include all original package and accesorries, item must in good condition. We will work with you to until you are satisfied. We will try our best to solve your problem to your satisfaction. We are always here with you! Our working time is 8 :30AM – 6:30PM from Monday – Friday.

IT IS 3 PHASE ; 220V; 1/2HP; 1200 RPM. THE SWITCH MOUNT BRACKET HAS BEEN BRAZED (SEE PICTURES). I HOOKED THE MOTOR UP TO POWER AND IT RUNS. I CAN FEEL A LITTLE VIBRATION WHEN THE MOTOR IS RUNNING. THE LEADS ARE PLIABLE. I DO NOT KNOW WHEN THE MOTOR WAS LAST USED OR SERVICED. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

I’m pretty sure they are all good, but just in case. Don’t want any problems, so AS-IS. See all pictures for the best description. Check out my other listings as well. Thank you for looking.

MOTORS AND SOME BRACKETS JUST WHATS IN THE PHOTOS CAME FROM A 3 AXIS BRIDGEPORT WITH CENT CONTROLLER.

IT IS3 PHASE ; 220V; 1/2HP; 1200 RPM. THE SWITCH MOUNT BRACKET HAS BEEN BRAZED (SEE PICTURES). I HOOKED THE MOTOR UP TO POWER AND IT RUNS. I CAN FEEL A LITTLE VIBRATION WHEN THE MOTOR IS RUNNING.

DC Spindle Motors Set Adjustable Speed Power Supply 500 W for Engraving Machines. Note: Pure copper wire is used in the motor. Model Number: 500W 100V. Package Include: 1 x Dc Spindle Motor Set.

Please watch the video from the link below. The easiest way to make your own CNC PLASMA CUTTER. Design to fit 2″x2″ and 50mmx50mm square tube profile. Kit includes, 3 slider cars, 1 torch holder, 2 plaques, bolts, screws that needed. Has the floating head feature. Aser cutted 5mm steel frame. Bended by computer guided bending machineNo weak welds! Full assembled with 6 point ball bearings for each sliding car. Zinc (galvanized) coated, water resistand. Can be drive by belt or rack&pinion. Stepper motors, belts, gears, switch, cable carrier are not includes! PACKAGE CONTENTS: (all parts shown at 6′th photo). 1x torch holder(z axis). 2x x-axis mounting plates. 1x Long screw and coupling for torch holder. All the bolts and nuts to setup the slider cars. You can ask any questions. WHAT ELSE I NEED FOR TO BUILD MY CNC PLASMA CUTTER? To build your Cnc plasma you will need. Nema 23 type Stepper motors capable of min. Stepper drivers which matches stepper motor needs. Pc and a suitable software (usb or parallel port) which fits your needs. Interface board to connect stepper drivers and pc. Power supply capable to feed the drivers. 2″x 2″ (50x50mm) tubings. 2 pcs of tubing 25cm longer than your work piece length. 3 pcs of tubing 25 cm longer than your workpiece width. 5mm pitch x12mm width belt and 12-18 tooth pulley. Rack (15x15mm+-2mm) and 12 to 18 tooth pinion. Some time, cutting and wiring works. Check out other items! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “k-koray” and is located in this country: TR. This item can be shipped worldwide.

• Control: CNC
• Model: 23

Sherline 5400 Mini Deluxe Mill Milling Machine Bench Top w/ Stepper Motors. This listing is for a Sherline Table Top Milling Machine. Model: 5400 Specifications: Brand: Sherline Type: Mini Milling Machine Condition: Used RPM: 70 to 2800 RPM Travel: 8.65″ (X), 5.00″ (Z), 6.25″ (Y) Max Clearance (Table to spindle): 8″ Spindle Nose Taper: #1 Morse Table: 2.75″ x 13″ Electric: 115V, Single Phase Weight: 36.5 LBS Includes all accessories as pictured including milling vice. The unit has 3 stepper motors installed on each axis. It does not include the unit that these 3 motors plug into and that will need to be sourced separately. Main spindle tested and runs great. Please inspect picture carefully as only what’s pictured is included with the mill. Get images that make Supersized seem small. Showcase your items with Auctiva’s. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dockguys” and is located in this country: US. This item can be shipped worldwide.

• Brand: Sherline
• Country/Region of Manufacture: United States
• Function: Milling
• MPN: 5400
• Machine Type: Mini Milling Machine
• Max Spindle Speed (RPM): 2501 – 3000
• Model: 5400
• Power Source: Electric
• Table Length: 10 in – 14.9 in
• Table Width: Less than 10 in
• Voltage: 110 V
• X-Axis Travel Bed: Less than 10 in
• Y-Axis Travel Bed: Less than 10 in
• Z-Axis Travel Bed: Less than 10 in

OMNITURN CROSS SLIDE WITH NEW TEKNIK MOTORS WITH BUILT IN ENCODERS. THERE IS NO CONTROLLER. THIS OMNITURN USED A FAGOR CONTROL AFTER IT FAILED I STARTED CONVERTING TO UPDATED NEW MOTORS AND WAS GOING TO USE A COMPUTER WITH MACH 3. HOWEVER RETIREMENT CAME FIRST. COVERS ARE INCLUDED THEY ARE REMOVED TO SHOW MOTORS ETC. FITS ALL HARDINGE TYPE MACHINES WITH 4 1/2 BED- HSL, DSM. PLEASE NOTE HARDINGE HSL TO WHICH IT IS MOUNTED IS NOT INCLUDED IN SALE, NOR IS THE TOOLING. THESE ITEMS WILL BE PUT UP LATER FOR SALE. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gaosborne” and is located in this country: US. This item can be shipped to United States.

• Control: CNC