Please watch the video from the link below. The easiest way to make your own CNC PLASMA CUTTER. Design to fit 2″x2″ and 50mmx50mm square tube profile. Kit includes, 3 slider cars, 1 torch holder, 2 plaques, bolts, screws that needed. Has the floating head feature. Aser cutted 5mm steel frame. Bended by computer guided bending machineNo weak welds! Full assembled with 6 point ball bearings for each sliding car. Zinc (galvanized) coated, water resistand. Can be drive by belt or rack&pinion. Stepper motors, belts, gears, switch, cable carrier are not includes! PACKAGE CONTENTS: (all parts shown at 6′th photo). 1x torch holder(z axis). 2x x-axis mounting plates. 1x Long screw and coupling for torch holder. All the bolts and nuts to setup the slider cars. You can ask any questions. WHAT ELSE I NEED FOR TO BUILD MY CNC PLASMA CUTTER? To build your Cnc plasma you will need. Nema 23 type Stepper motors capable of min. Stepper drivers which matches stepper motor needs. Pc and a suitable software (usb or parallel port) which fits your needs. Interface board to connect stepper drivers and pc. Power supply capable to feed the drivers. 2″x 2″ (50x50mm) tubings. 2 pcs of tubing 25cm longer than your work piece length. 3 pcs of tubing 25 cm longer than your workpiece width. 5mm pitch x12mm width belt and 12-18 tooth pulley. Rack (15x15mm+-2mm) and 12 to 18 tooth pinion. Some time, cutting and wiring works. Check out other items! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “k-koray” and is located in this country: TR. This item can be shipped worldwide.

• Control: CNC
• Model: 23

Sherline Model 5000 CNC milling machine. Up for grabs is a sherline cnc milling machine. I ended up going a different route. The unit was built and tested but never did any cutting or machining with it. Stored in the basement for 2 years unused. No scratches or tool markings at all. Pretty much in new condition. Comes with 3 Nema 23 dual shaft stepper motors with a 270 oz holding torque. The stepper motors are controller by a 4 Axis TB6560 Stepper Motor Driver Board Controller With Box. Also includes power supply with emergency shut off switch. I will also throw in an HP Desktop PC running windows xp which has MACH3 Demo installed. Monitor and mouse is not included. Stepper motor controller specs. Adopt Original Toshiba TB6560AHQ chip – High power, maximum 3.5A drive current chipset! Adjustable “0.5A-3.5A(Peak Current)” Drive Current Settings: the ouput current of actual operation on each axis can be set to “20%, 50%, 75%, 100%” of the Maximum Current. Adjustable Subdivision(Micro Step) Settings: 1, 1/2, 1/8, 1/16. Adjustable Decay Mode Settings(4 modes): I. 0% — No Decay Mode; II. 25% — Slow Decay Mode; III. 50% — Mid Decay Mode; IV. 100% — Fast Decay Mode. Automatic Semi-flow Control Function: adjustable semi-flow mode and adjustable semi-flow current , with multiple semi-flow model and semi-flow current settings. With New-type Bipolar constant current chopping technology: High working precision, Low vibration, Low noise. Professional design with super anti-jamming function for steadier running. Overload, Overheat Protection Function: Protect the Computer, Driver board and other equipments from being damaged. Cooling Aluminium box Design: Cooling function and Protect the driver board from being damaged by dirt, dust or other liquids. The item “Sherline 5000 cnc milling machine Nema 23 stepper motor controller PC 3 axis” is in sale since Thursday, October 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bigboost-motorsport” and is located in Acworth, Georgia. This item can be shipped to United States.

• Brand: Sherline
• Country/Region of Manufacture: United States
• Model: Sherline 5000

Aig cnc mill x-y table. 12 x 5 1/2 travel. It has seen limited use and holds close tolerance. It has backlash adjustment lead screw nuts. It has mounts for nema 23 servo or stepper motors. The motor flex zero backlash couplings are included. The table has low profile mount base blocks installed. The original taig mill base is included and can be reused if desired.The item “TAIG 2019CR MINI MILLING MACHINE TABLE X-Y TABLE NEMA 23 CNC SERVO READY” is in sale since Tuesday, April 28, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “fprdnman778″ and is located in Willis, Texas. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Taig
• Model: 2019CR