feed Subscribe to feed
pic
29. 02
2020

Ammco Rockwell Delta 7 Metal Shaper

Written by: admin - Posted in: Uncategorized - Tags: , , , ,
Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper


Ammco Rockwell Delta 7 Metal Shaper. Metal Shaper is in excellent looking condition. It was running when removed from the watchmakers shop. This is a great little shaper that I’ve owned for many years. It runs great and everything is in great condition. The stock light is also there (but needs to be wired). By the time shapers get down to below a 7 stroke they usually come to resemble something. Other than a standard industrial machine. But not so the American “Ammco”. 2112 Commonwealth Avenue, North Chicago, was constructed exactly along the lines of larger machines and had five rates of reversible automatic cross feed – though the feed dial was ungraduated and there was no slide lock. The box had a horizontal travel of 9.5″, vertically 4.25″ and could be moved to within 1.125 inches of the ram or extended to be some 5.25 inches away. The toolholder had a maximum travel of 3.25 inches. A useful safety feature was that the box would run off its feed screw if left on self-act – because shaper work is so steady there is a terrible temptation to set, and forget.. Four speeds were provided of 40, 70, 115 and 180 strokes per minute, from a rear-mounted motor which drove to a large pulley – the supporting shaft of which passed through the rear of the body casting and carried at its other end a four-step pulley to drive the crank. Each of the two drive belts were arranged so that they could be independently adjustable for tension. The box was properly supported at its front by a bar able to slide along a machined base and a most useful looking vice, with 4″ wide jaws and an open capacity of 4.25″, was supplied as standard. Unfortunately, the slots in the table were not of T section, but had plain, parallel sides. In the base of each slot was a row of plain 5/16 holes – which enterprising owners were able to tap out and use to bolt workpieces and attachments in place. Both early and late versions have been discovered, the earlier having what might just be a unique method of turning the table-feed ratchet on a shaper – a cable. While the late version had its electric motor foot-mounted onto the rear of the main body and drive by V-belts, the first version had a 3-step flat-belt cone pulley on the input shaft – this obviously being intended for drive by either overhead line shafting in a workshop or by a remote countershaft. The original shaper was supplied by the makers on a fine maple cabinet stand with cupboard and drawer storage – and, as two identical specimens of the stand have come to light, this disproves the theory that the first might have been a home-made affair. Although claimed as a 6-inch machine by Ammco in their sales literature, the maximum stroke was actually 7.25 with Delta Rockwell themselves advertising it as a 7-inch. The shaper is 32″ long, 18″ wide, 242 high and weighed 225 lbs. The item “Ammco Rockwell Delta 7 Metal Shaper” is in sale since Tuesday, February 25, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “luckyschwinning” and is located in Brick, New Jersey. This item can’t be shipped, the buyer must pick up the item.

  • Machine Type: Metal Shaper
  • Brand: Rockwell/Delta
16. 02
2020

Rockwell 7×24 horizontal vertical knee milling machine 110 volt with tooling

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , ,
Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling


Rockwell 7x24 horizontal vertical knee milling machine 110 volt with tooling



Rockwell 21-120 horizontal and vertical milling machine. Started life as a horizontal only. The Rockwell Head was added to this machine later. Fits perfect as the rare factory original comb machine. Both motors are 3ph but the onboard vfd will run either motor in 110volt. Horizontal is nmtb 30 taper with an arbor, tool holder with collets, original overarm, arbor support and draw rod. Vertical head is r-8 like a Bridgeport includes drill chuck, set of collets, hold down set and a 4 swivel vise. Table is in good shape as are the ways, minor scratches. Both spindles run good. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Rockwell 7×24 horizontal vertical knee milling machine 110 volt with tooling” is in sale since Friday, February 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

  • Machine Type: Milling Machine
  • Brand: rockwell
  • Control: CNC
  • Voltage: 115 V
29. 01
2020

Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE

Written by: admin - Posted in: Uncategorized - Tags: , , , , , ,
Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE


Included with this mill is a large custom box on wheels, with drawers, containing many bits and attachments. I know very little about this item, other than it powers on and sounds smooth, – no noises. This absolutely MUST be picked up in Topanga Canyon, where it is. The item “Rockwell Milling Machine With many dozens of bits and attachments NO RESERVE” is in sale since Monday, January 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “elfamosojay” and is located in Topanga, California. This item can’t be shipped, the buyer must pick up the item.

  • Model: Milling Machine
  • Country/Region of Manufacture: United States
  • Machine Type: Vertical Milling Machine
  • Power Source: Electric
  • MPN: Does Not Apply
  • Function: Drilling
  • Brand: ROCKWELL
20. 07
2019

Rockwell Model 21-100 Vertical Milling Machine (CTAM #4747)

Written by: admin - Posted in: Uncategorized - Tags: , , , , , ,
Rockwell Model 21-100 Vertical Milling Machine (CTAM #4747)


Rockwell Model 21-100 Vertical Milling Machine (CTAM #4747)


Rockwell Model 21-100 Vertical Milling Machine (CTAM #4747)


Rockwell Model 21-100 Vertical Milling Machine (CTAM #4747)


Rockwell Model 21-100 Vertical Milling Machine (CTAM #4747)


Rockwell Model 21-100 Vertical Milling Machine (CTAM #4747)


Rockwell Model 21-100 Vertical Milling Machine. 6 1/2″ x 24″ Table. 3/4 HP Motor – 220 VAC 3 Phase. Visit us and see this machine running! The item “Rockwell Model 21-100 Vertical Milling Machine (CTAM #4747)” is in sale since Tuesday, July 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cooktool683″ and is located in Sicklerville, New Jersey. This item can’t be shipped, the buyer must pick up the item.

  • Country/Region of Manufacture: United States
  • Machine Type: Vertical Milling Machine
  • Brand: Rockwell
8. 06
2019

Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , ,
Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab


Rockwell Milling Machine – Came from a local School Shop Class in working order – Comes with lots of tooling, Fixtures and Gauges- Perfect size for small shop. The item “Rockwell Horizontal Milling Machine Mill Vise Tooling Gauges Precision Fab” is in sale since Friday, June 7, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “midwestrustyparts86″ and is located in Fort Dodge, Iowa. This item can’t be shipped, the buyer must pick up the item.

  • Modified Item: No
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Brand: Atlas
22. 12
2018

Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck


Rockwell vertical milling machine. Very heavy duty, not at all like the new imports. All original, original paint. Tight spindle and ways. Small footprint, big capabilities. Perfect for 2-car garage or basement shop. 110v plug in anywhere. Not from production shop. Was from estate of hobbyist Harley builder. Also have matching Clausing tool-room lathe for sale. Comes with Mill vise (needs new jaws). Complete set brand new R8 collet set by 16ths. Jacobs 14N Ball Bearing 1/2 drill chuck on R8 arbor. Free loading onto your truck or trailer. The item “Rockwell 21-100 Vertical Milling Machine, mill vise, Collets, jacobs chuck” is in sale since Saturday, December 22, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “cmcdivit” and is located in Fountain Valley, California. This item can’t be shipped, the buyer must pick up the item.

  • Brand: Rockwell Manufacturing Company, Pittsburgh, PA
  • Custom Bundle: Yes
1. 12
2018

Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits


This unit has an X-axis power feed and includes a variety of collets, bits, set up blocks, and related accessories. It also includes a machinist vice and a variable frequency drive that allows the three phase motor to be operated on 120 V AC. There are no problems with this machine and it is ready to work for you. The machine is located in urbana, IL 61801. The item “Rockwell 21-100 Vertical Milling Machine with X-Axis Power Feed, Collets & Bits” is in sale since Friday, November 30, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “vilas_2016″ and is located in Urbana, Illinois. This item can’t be shipped, the buyer must pick up the item.

  • Brand: Rockwell Manufacturing Company, Pittsburgh, PA
  • Custom Bundle: Yes
18. 10
2018

Rockwell 6.5 x 24 Vertical Milling Machine with X-Axis Power Feed, 120 Volt

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
Rockwell 6.5 x 24 Vertical Milling Machine with X-Axis Power Feed, 120 Volt


Rockwell 6.5 x 24 Vertical Milling Machine with X-Axis Power Feed, 120 Volt


Rockwell 6.5 x 24 Vertical Milling Machine with X-Axis Power Feed, 120 Volt


Rockwell 6.5 x 24 Vertical Milling Machine with X-Axis Power Feed, 120 Volt


Rockwell 6.5 x 24 Vertical Milling Machine with X-Axis Power Feed, 120 Volt


Rockwell 6.5 x 24 Vertical Milling Machine with X-Axis Power Feed, 120 Volt


This is the plug and play knee mill that you’ve been looking for your home shop! Both the spindle drive motor and the X-axis power feed servo motor are set up for single phase 120 VAC. The Forward and Reverse Drum Switch are in easy reach on the left side, as is the spindle brake and the Z-axis hand-feed wheel for precision boring control. The power feed rate dial, clutch, and rapid jog switch are all on the servo housing. The X-axis limit switch is wired and works well. Setting circles at both ends of the 24 table and on the Y-axis read 0.2 inches each revolution with 0.001 subdivisions. The handwheels and Z-axis crank are the standard, original metal handles. The quill has a Depth Scale, Locknuts, and a positionable Hand Feed Lever. The quill is tight, the quill lock holds securely and the. Table Clamp, Saddle Clamp, and Knee Clamp provide extra rigidity for heavy milling cuts. The mill is in very good condition, reconditioned following production shop duty, disassembled, cleaned, and lubricated. The Power Head pulls forward or back by loosening the two Head Clamping Bolts, and likewise the head rotates left and right 90 degrees by rotating the geared Head Tilting Drive Bolt. Spindle speeds are selected with the V-belt positioned on the step pulleys. Included accessories are the vise with handle. A set of vise parallels. Quill wrench, T-slot clamp set, and the instruction and parts manuals for the Rockwell Milling Machine and for the X-axis power servo. This mill is designed for disassembly into manageable parts, for example, to move into basement shops. The item “Rockwell 6.5 x 24 Vertical Milling Machine with X-Axis Power Feed, 120 Volt” is in sale since Wednesday, October 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “whitmyre” and is located in Elkton, Maryland. This item can’t be shipped, the buyer must pick up the item.

  • Brand: Rockwell Manufacturing Company, Pittsburgh, PA
  • Custom Bundle: Yes
10. 08
2018

Rockwell vertical milling machine, 220volts 2 phase or 3 phase

Written by: admin - Posted in: Uncategorized - Tags: , , , , ,
Rockwell vertical milling machine, 220volts 2 phase or 3 phase


Rockwell vertical milling machine, 220volts 2 phase or 3 phase


Rockwell vertical milling machine, 220volts 2 phase or 3 phase


Rockwell vertical milling machine, 220volts 2 phase or 3 phase


Mill is in excellent condition. Motor is 220 volt 3 phase presently converted to 2 phase. The 3 phase controls go with the mill. The attachments include the vise shown in the photo, a surface grinder, a Jacobs chuck, a mill holder, an assortment of cutters, and shields, that go completely around the work area. The item “Rockwell vertical milling machine, 220volts 2 phase or 3 phase” is in sale since Thursday, August 9, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jaspatkins” and is located in Westwood, Massachusetts. This item can’t be shipped, the buyer must pick up the item.

11. 03
2018

Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , ,
Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V


We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned /Used Rockwell Vertical. Milling Machine W/Vise, End Mills & New Collert Set, 115 V. Details & Spec’s. Electrical – 115 Volts , 1Ph. Table Size – 6-1/2″ x24″ W/3 T Slots. Traverse “Cross”- 6-3/4. Vertical Spindle Type – R8… “Same As Bridgeport & Others”. Vertical Spindle Speeds – 245,470,780,1620,2940,4200 Rpm. Quill Feed Travel – 2-1/2. Vertical Head Rotation – 90 Deg. Right & 90 Deg. Machine Weight – 780 Lbs. Machine Dimensions – 37-1/2″x33-3/4″ x 73-1/2. Vertical Head W/Draw Bar For R8 Collets. New Set Of R8 Collets. Assorted New & Used Quality End Mills. This Is A Nice Running Rockwell Mill That’s In Very Good Overall Condition!! Safety Requirements & Standards. Additional & Optional After Sale Services. Typical Minimum Trucker Requirements Needed To Obtain The Best Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Brenda & Cliff Davis. (at) davismachinery(dot) com. The item “Rockwell Vertical Milling Machine WithVise, End Mills, Tap Head, Chuck & Collets115V” is in sale since Saturday, March 10, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

  • Brand: Rockwell
  • Model: 21-100
  • MPN: 21-100
  • Country//Region of Manufacture: United States
  • Country/Region of Manufacture: United States

Search this blog