Please note- this set may be slightly incomplete, look at the photos carefully. Just as pictured, I have a number of these but this one was opened for planning a small scale production of some parts, and over time some of the smaller accessories were borrowed or misplaced. This was never hooked up, and you will get exactly what you see in the photos (except the power cord with switch, that was included in the photo by mistake, the power cord and switch for this machine is already mounted on the side, the one on the work bench goes to another unit). The item “TAIG 4 AXIS CNC MILL set up New but incomplete” is in sale since Monday, October 10, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “royshop7″ and is located in Reading, Pennsylvania. This item can be shipped to United States.

TAIG MILLING MACHINE: Good working machine, a few small blemishes on tables. CNC Electronics mounted in surplus case, worked fine for me at one time, uses printer port on computer. I did not use it very much, and it has been in storage for about 3 years. The item “Taig Machinist Benchtop CNC 4 Axis milling machine, 3 extra servos, lightly used” is in sale since Wednesday, September 23, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “finelinedj” and is located in Portland, Oregon. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• Brand: TAIG

Lightly used and well cared for Taig Mini CNC Mill. Backlash within specifications of a new mill. Includes Upgraded 1HP DC motor with speed control. Combined with the original step pulley, this system allows the operator to select any RPM up to 10,000. Custom tachometer gives real time RPM readout. 1 HP motor will not bog down within the cutting limits of the mill. Controller is wired for 4 axis (A control). 4th axis rotary is in excellent condition. Milling table is in very good condition. Two defects are shown in close-up photos. Both marks are result of bolts from a fixture contacting table – not cut marks from mill bits. Full set of R16 collets included in addition to drill chuck. System was mainly used in a laboratory for light aluminum milling and engraving PC boards. This system is capable of very high precision. Was used to make high accuracy aluminum components for lasers. The item “Taig Micro CNC Mill 4-Axis Long Bed 1 HP DC Motor Variable Speed with Tach” is in sale since Monday, June 08, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “netmercury” and is located in Williamstown, Massachusetts. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Taig
• Model: Taig CNC MicroMill

Aig cnc mill x-y table. 12 x 5 1/2 travel. It has seen limited use and holds close tolerance. It has backlash adjustment lead screw nuts. It has mounts for nema 23 servo or stepper motors. The motor flex zero backlash couplings are included. The table has low profile mount base blocks installed. The original taig mill base is included and can be reused if desired.The item “TAIG 2019CR MINI MILLING MACHINE TABLE X-Y TABLE NEMA 23 CNC SERVO READY” is in sale since Tuesday, April 28, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “fprdnman778″ and is located in Willis, Texas. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Taig
• Model: 2019CR

1 fly cutter for milling larger surfaces. This cutter is individually hand crafted in the usa to precision tolerances to accept a 1/4 hss tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed i can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them. The cutter is made from 12l14 steel with a 3/8″ shank and to accept a 1/4″ square tool width. Angle is set at 20 degrees for tool. 001 and tool diameter is 1.000 -. 005 to ensure precision angles from stock. Surface finish when using a fly cutter is based on depth of cut, speed of the cutter and shape of tool. Material width cut is based on how much tool is sticking out from the cutter, starting is about 1.250 and greater, but too much tool sticking out could cause a poor finish or tool chatter. I do not provide the tool because i feel i would not be able to provide the best quality or profile you might wish to use. Fits taig and like smaller mills, but will work with large as well, i use with an r8 collet in my lms 3900. Please note i can make any tool slot size you need or shank diameter. I have 1.5″ and 1″ stock on hand, other can be obtained within 3 days if you needed. But if you need a custom style built, please let me know. Thank you for looking.The item “1 w 3/8 shank Fly Cutter for Mini Mill, Taig, and like size” is in sale since Sunday, March 01, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “thomasjs” and is located in Faribault, Minnesota. This item can be shipped to United States.

3/4 fly cutter for milling larger surfaces. This cutter is individually hand crafted in the usa to precision tolerances to accept a 1/4 hss tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed i can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them. The cutter is made from 12l14 steel with a 3/8″ shank and to accept a 1/4″ square tool width. Angle is set at 20 degrees for tool. 001 and tool diameter is 0.750 +/- 0.001. Surface finish when using a fly cutter is based on depth of cut, speed of the cutter and shape of tool. Material width cut is based on how much tool is sticking out from the cutter, starting is about 1.000 and greater, but too much tool sticking out could cause a poor finish or tool chatter. I do not provide the tool because i feel i would not be able to provide the best quality or profile you might wish to use. Fits taig and like smaller mills, but will work with large as well, i use with an r8 collet in my lms 3900. Please note i can make any tool slot size you need or shank diameter. I have 1.5″ and 1″ stock on hand, other can be obtained within 3 days if you needed. But if you need a custom style built, please let me know. Thank you for looking.The item “3/4 w 3/8 shank Fly Cutter for Mini Mill, Taig, and like size” is in sale since Monday, February 09, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “thomasjs” and is located in Faribault, Minnesota. This item can be shipped to United States.

1 fly cutter for milling larger surfaces. This cutter is individually hand crafted in the usa to precision tolerances to accept a 1/4 hss tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed i can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them. The cutter is made from 12l14 steel with a 3/8″ shank and to accept a 1/4″ square tool width. Angle is set at 20 degrees for tool. 001 and tool diameter is 1.000 -. 005 to ensure precision angles from stock. Surface finish when using a fly cutter is based on depth of cut, speed of the cutter and shape of tool. Material width cut is based on how much tool is sticking out from the cutter, starting is about 1.250 and greater, but too much tool sticking out could cause a poor finish or tool chatter. I do not provide the tool because i feel i would not be able to provide the best quality or profile you might wish to use. Fits taig and like smaller mills, but will work with large as well, i use with an r8 collet in my lms 3900. Please note i can make any tool slot size you need or shank diameter. I have 1.5″ and 1″ stock on hand, other can be obtained within 3 days if you needed. But if you need a custom style built, please let me know. Thank you for looking.The item “1 w 3/8 shank Fly Cutter for Mini Mill, Taig, and like size” is in sale since Tuesday, January 27, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “thomasjs” and is located in Faribault, Minnesota. This item can be shipped to United States.

Ultra rare childs #00000 milling machine watchmaker taig sherline unimat size. Looks like the last owner restored it. Base is 15 1/2″ x 15 1/2″. Table is 12″ x 2 1/8″.The item “ULTRA RARE CHILDS #00000 MILLING MACHINE WATCHMAKER TAIG SHERLINE UNIMAT SIZE” is in sale since Sunday, November 16, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tool-in-the-box” and is located in Hillsborough, New Jersey. This item can be shipped to United States.

The leadscrew nuts currently installed have negligible use on them. Included with the mill are. 1 – 3″ x 3.5″ slotted angle block. 1 – 3″ x 4.5″ slotted angle block. 1 – 3″ x 3″ uncut plain angle block (for making your own tooling). 1 – 4″ x 4″ uncut plain angle block. 3 collets (maybe more if i find them). You probably won’t be able to cut steel with half-inch mills, but they are great for plastic and aluminum. 1 – jacobs chuck with two keys.

More to be added as i continue to sort my tools. I have to separate the various items into groups to include with each. I will update this listing shortly. Departing zip code for the ups depot is 98052.

The item “TAIG Micro Milling Machine” is in sale since Thursday, November 13, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “digitalscribbler68″ and is located in Bellevue, Washington. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: TAIG
• Model: Micro Mill