NEW 6″ / 150MM Rotary Table “Slim Body. Comes complete with 4 jaw 150mm chuck and fixing kit. Only 60mm high (without chuck). Table Ratio 72:1. Graduated 360 degrees and 60 minutes. Base is ground with 4 securing slots and 1 guide slot. Table locking handle can be removed if needed. Table can be Horizontal or Vertical. Table has a 95mm centre high in the vertical position. Comes with 3 T slots. Perfect for small milling machines which have only a small amount of table space. A TOP QUALITY TABLE WITH SMOOTH ROTATION. The item “RDGTOOLS NEW 6 / 150MM Rotary Table Slim Body + 150mm 4 Jaw” is in sale since Thursday, July 3, 2014. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

For sale a used, Bridgeport Milling Machine. Unique knee, with head mounted to a second table. Head is a J head, S/N: 2J-35695. AS IS, WHERE IS. 2 WEEKS TO CLEAR BEFORE ITEM IS RELEASED. NO CHARGE TO LOAD ON TRUCK IF UNDER 7,500 LBS – IF OVER ADDITIONAL CHARGES APPLY. Used machines may not incorporate approved activating mechanisms, operator safety devices, or safety guards, as required by OSHA or otherwise. It is the purchasers responsibility that the said used machines be so equipped and safe-guarded to meet OSHA and other requirements before placing such machinery into operation. The covenants expressed herein shall be servable, and the invalidity, now or in the future of any of the covenants recited. Herein shall not affect the validity of the remaining covenants. Under no circumstances shall we or any affiliate of ours have any liability whatsoever for the loss of use or for any indirect or consequential damages. The item “Bridgeport Milling Machine” is in sale since Thursday, January 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “0030777″ and is located in Warminster, Pennsylvania. This item can be shipped to United States.

• Make: Bridgeport

DESIGNED TO FIT THE MYFORD ML7 / SUPER 7 (ITS TOO BIG FOR THE ML10 / ML4). FIT STRAIGHT ON CROSSLIDE FOR QUICK. TURNING OF BALLS & CONES. 1 INDEXABLE TIP WITH 6 CUTTING EDGES. PRESET CENTRE HIGHT FOR MYFORD LATHES. HEAD ADJUSTABLE FOR VARIOUS SIZE BALLS. THREADS WILL NEED CLEANING OUT. MAXIMUM BALL DIAMETER IS 38MM. THIS ATTACHMENT CAN BE USED ON LARGER MACHINES. BUT PACKING WILL BE NEEDED TO BRING UP TO LARGER CENTRE HIGHT. TO HELP YOU SEE THE POSSIBLE USES OF THIS. ATTACHMENT THERE ARE 2 SIMILAR ATTACHMENTS ON “YOUTUBE”. THE ONLY DIFFERENCE IS THAT OUR MODEL USES A DIFFERENT. INDEXABLE TIP, AND IS PRESET FOR MYFORD LATHES. The item “RDGTOOLS BALL TURNING ATTACHMENT MYFORD LATHES UPTO 38MM DIAMETER BALLS CONES” is in sale since Thursday, March 3, 2016. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• Joiners & Lathes: Lathe
• Sub-Type: Lathe
• MPN: Does Not Apply
• Brand: Unbranded/Generic

2MT ER32 COLLET SET 18PC / LATEST QUALITY. THIS QUALITY AND PRICE ONLY FROM RDGTOOLS. 18PC COLLETS COVERING ALL SIZES 2-20MM. THESE COLLETS ALLOW HOLDING OF. STRAIGHT SHANK SLOT / END MILLS. DRILLS REAMERS, SPOT FACERS, ECT. PLUS 2MT ER32 COLLET CHUCK WITH SPANNER DRAWBAR 10MM. INFACT ANYTHING ROUND BETWEEN 2-20MM. 18PC COLLET SET SET IS STORED AND DISPLAYED IN QUALITY. The item “RDGTOOLS 2MT ER32 COLLET CHUCK SET 18PC MYFORD” is in sale since Friday, November 12, 2010. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• Brand: RDGTools HBM Myford
• MPN: Does Not Apply

RDGTOOLS TOOLMAKERS V BLOCK WITH 2 CLAMPS. DIMENSIONS: 45 X 40 X 35MM. QUALITY LARGE MATCHED PAIR OF V BLOCKS. SEE OUR OTHER 6600 ENGINEERING TOOLS. The item “RDGTOOLS VEE BLOCK SET WITH TWO CLAMPS 45 X 40 X 35MM MILLING ENGINEERING TOOLS” is in sale since Tuesday, November 13, 2012. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in HEBDEN BRIDGE WEST YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

2-3/4 ROTARY TABLE WITH 4 SLOTS. SMALL 4 SLOT ROTARY TABLE. TABLE RATIO 1:48. 90MM BETWEEN CENTRES FOR FIXING TO A TABLE. T SLOTS ARE 7MM DEEP X 7MM AT THIN POINT X 12MM AT BOTTOM. 5MM CENTRE HOLE NOT THREADED. PLATE SIZE IS 102MM LONG X 72MM WIDE. THIS UNIT IS WELL-SUITED TO MODEL ENGINEERING AND IS SMALL ENOUGH TO BE MOUNTED ON TO SMALL MILLS, OR LATHE CROSS SLIDES AND VERTICAL SLIDES. HANDY FOR SMALL MILLERS AND LATHES. OR SEE OUR OTHER 3700 ENGINEERING TOOLS. The item “RDGTOOLS SMALL ROTARY TABLE 4 SLOT 2-3/4 TABLE DIAMETER SMALLEST ON MARKET” is in sale since Tuesday, June 19, 2012. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in HEBDEN BRIDGE WEST YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

MYFORD ER32 COLLET SET COMPLETE SET. MYFORD ER32 COLLET CHUCK WITH ER32 COLLETS 3MM TO 20MM COMPLETE SET IN ONE BOX. ER32 COLLET CHUCK WITH BUILT IN MYFORD THREAD. THIS IS A 2PC HEAD SYSTEM. THIS SYSTEM IS DESIGNED TO CREATE THE BEST ACCURACY AVAILABLE ON YOUR MACHINE! 1CLEAN ALL PARTS. 2 FIT THE BACKPLATE TO THE MACHINE. 3ROUGH TURN THE REGISTER. 4 SKIM FACE AND BLEND WITH THE DIAMETER. 5 FINISH THE REGISTER DIA. 6 OFFER UP THE ADAPTOR AND SKIM MORE IF NEEDED. 7 CLEAN THE ADAPTOR AND SECURE WITHTHE 3 SCREWS BUT DO NOT TIGHTEN. 8USE A DTI ON THE TAPER TO CHECK THE ACCURACY. 9 IF REQUIRED TAP DOWN THE HIGH POINT AND RE CHECK. 10 TIGHTEN THE SCREWS. COLLET CHUCK IS THREADED 1-1/8 X 12TPI. FULL 18PC ER32 COLLET SET. RANGE 2-20MM AND IMPERIAL EQUIVELENT. THE WHOLE SET IS SUPPLIED IN ONE COMPLETE STORAGE BOX. THIS COLLET SET WILL HOLD THREADED AND STRAIGHT SHANK ENDMILLS / DRILL BITS ETC. The item “RDGTOOLS ER32 MYFORD COLLET CHUCK SPANNER COMPLETE SET MILLING SUPER 7 ML7″ is in sale since Wednesday, September 4, 2013. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

HBM Quick Change Toolpost for Myford Lathes (inc 2 standard holders). HBM Quick Change Toolpost for Myford Lathes. Pictured on a Myford Ml10 Lathe. Including 2 Standard holders (12MM capacity). 10mm centre height when used on a myford ml/super 7. This unit will also fit Myford ML10 (giving a 6mm tool height). This unit is also easily modifyed to fit the mini lathe. Specs: main block height 32.4mm high x 7/16 bore. Made only for RDGTools. New improved clamp action. Simply Tap the handle to release the holders. 7/16 bore for direct Myford fitting. The holders etc are NOT compatible with dixon toolposts. The item “RDG TOOLS HBM QUICK CHANGE TOOL POST FOR MYFORD LATHE WITH 2 HOLDERS SWISS TYPE” is in sale since Tuesday, October 28, 2014. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

Latest 75mm Tilting Rotary Table. Has 3 T-slots for fixing work. Table tilts upto 90 degrees and can be used anywere in between. Base is 100 x 100mm with 2 x 10mm mounting holes seperated by 110mm. Stands 53mm tall 9in folded flat position. Table graduated 0-360 degrees in 5 degree divisions. Winding handle is graduated 0-10 degrees in 5 minute divisions. This Model only available from RDG Tools. Unit is well suited for all model engineering applications. Small enough to be mounted on small mills or on a lathe vertical slide or cross slide. The item “RDGTOOLS NEW 75MM / 3 TILTING ROTARY TABLE 3 SLOT MILLING LATHES ENGINEERING” is in sale since Monday, September 14, 2009. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford