MYFORD ER32 COLLET SET COMPLETE SET. MYFORD ER32 COLLET CHUCK WITH ER32 COLLETS 3MM TO 20MM COMPLETE SET IN ONE BOX. ER32 COLLET CHUCK WITH BUILT IN MYFORD THREAD. THIS IS A 2PC HEAD SYSTEM. THIS SYSTEM IS DESIGNED TO CREATE THE BEST ACCURACY AVAILABLE ON YOUR MACHINE! 1CLEAN ALL PARTS. 2 FIT THE BACKPLATE TO THE MACHINE. 3ROUGH TURN THE REGISTER. 4 SKIM FACE AND BLEND WITH THE DIAMETER. 5 FINISH THE REGISTER DIA. 6 OFFER UP THE ADAPTOR AND SKIM MORE IF NEEDED. 7 CLEAN THE ADAPTOR AND SECURE WITHTHE 3 SCREWS BUT DO NOT TIGHTEN. 8USE A DTI ON THE TAPER TO CHECK THE ACCURACY. 9 IF REQUIRED TAP DOWN THE HIGH POINT AND RE CHECK. 10 TIGHTEN THE SCREWS. COLLET CHUCK IS THREADED 1-1/8 X 12TPI. FULL 18PC ER32 COLLET SET. RANGE 2-20MM AND IMPERIAL EQUIVELENT. THE WHOLE SET IS SUPPLIED IN ONE COMPLETE STORAGE BOX. THIS COLLET SET WILL HOLD THREADED AND STRAIGHT SHANK ENDMILLS / DRILL BITS ETC. The item “RDGTOOLS ER32 MYFORD COLLET CHUCK SPANNER COMPLETE SET MILLING SUPER 7 ML7″ is in sale since Wednesday, September 4, 2013. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

HBM Quick Change Toolpost for Myford Lathes (inc 2 standard holders). HBM Quick Change Toolpost for Myford Lathes. Pictured on a Myford Ml10 Lathe. Including 2 Standard holders (12MM capacity). 10mm centre height when used on a myford ml/super 7. This unit will also fit Myford ML10 (giving a 6mm tool height). This unit is also easily modifyed to fit the mini lathe. Specs: main block height 32.4mm high x 7/16 bore. Made only for RDGTools. New improved clamp action. Simply Tap the handle to release the holders. 7/16 bore for direct Myford fitting. The holders etc are NOT compatible with dixon toolposts. The item “RDG TOOLS HBM QUICK CHANGE TOOL POST FOR MYFORD LATHE WITH 2 HOLDERS SWISS TYPE” is in sale since Tuesday, October 28, 2014. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

Latest 75mm Tilting Rotary Table. Has 3 T-slots for fixing work. Table tilts upto 90 degrees and can be used anywere in between. Base is 100 x 100mm with 2 x 10mm mounting holes seperated by 110mm. Stands 53mm tall 9in folded flat position. Table graduated 0-360 degrees in 5 degree divisions. Winding handle is graduated 0-10 degrees in 5 minute divisions. This Model only available from RDG Tools. Unit is well suited for all model engineering applications. Small enough to be mounted on small mills or on a lathe vertical slide or cross slide. The item “RDGTOOLS NEW 75MM / 3 TILTING ROTARY TABLE 3 SLOT MILLING LATHES ENGINEERING” is in sale since Monday, September 14, 2009. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford