130mm MT4 Bull Nose Live Center 75 Degree Morse Taper #4 4MT Bullnose. Bull Nose Bottom Diameter: 130mm. Radial Loads: 800 Lbs. Thrust Loads: 870 Lbs. Bull Nose Taper: 75 Degree. Made of Alloy Steel, High Quality And Durable. Designed For Large, Hollow Work Pieces Such As Pipe, Tube or Other Material That Has a Large Center Hole. Unit Dim L x W x H (in). 5 x 5 x 8 Estimated.

BRIDGEPORT R8 RIGHT ANGLE MILLING ATTACHMENT For Bridgeport, Jet, Enco. Good condition and works great. Removed from Bridgeport milling machine.

Bridgeport no 4 head that has a broken gear piece as shown in the pics. Could be a opportunity to get into one of these heads at a discount if you can repair it. Out of inventory of a local business.

Bridgeport J and 2J Head Pattern Milling Machine Attachment. Accepts 1/4 Bars and Bits. 3/4 Shank / Arbor. Overall Length: 8 approximate. Brass Tagged: MACOMB PATTERN AND MFG. Used, bearings feel good, well maintained. Adapter slides over the spindle housing until the gears mesh well.

WGT: 1,235LBS.

PARTS OR REPAIR – BAD BEARINGS. Pulled from a Tormach 1100 mill, was making noise to bearings may need replacement. Please ask any questions prior to purchasing, happy to provide measurements/etc if needed.

If you are visiting this listing there is a good chance you already understand what you’re looking at. This is a Professional Brush Plating setup. Very nice and very portable. This item is manufactured by Olympic Plating and Precious Metals Inc in Las Vegas, Nevada. The very cool tote system allows for chemical (not included) storage in the bottom and a 250lb weight limit to sit on top when not in use. If you have questions, please ask and we will try to answer them. The item could use a little more cleaning and includes everything shown in the photos. MANUAL, LOTS OF CONNECTORS AND MORE. This unit powers on and does what is shown in the video. These units, as I’m sure you are aware, are very expensive. Large bubbles will be packed in the tote to make it solid. It does what is shown in the video. We cannot guarantee more than that. The item is NON-RETURNABLE / NON-REFUNDABLE.

THE GOOSENECK SECTION IS ABOUT 36 APPROX. THERE ARE MEASUREMENTS IN THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

Suit for most Turret and vertical milling machine Modle:NT30 Total length:540mm After the spindle is replaced, the work effect is as new Smoother than Before Package:1Set (Spindle + Bearing). The spindle of the drilling and milling machine adopts the national standard steel, the spindle is quenched and tempered, and the sleeve carburizing treatment is more wear-resistant and durable! Spindle The sleeve assembly is suitable for ZX50 ZX7550 ZX7124 ZX6350 series drilling and milling machine milling head, there is good interchangeability! After the spindle is replaced, the old machine is like a new machine; Can change is due to the long-term wear of the spindle. The bearing clearance is large. The tool jumps and the surface and side of the milling workpiece are not smooth Rough and uneven state. Make sure your Address is correct.

8 Pcs/Set 14.5° Involute Gear Cutter DP8 DP10 DP16 DP20 DP22 PA14-1/2 HSS 8H Kit. Item Description: Set 8 Pcs DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutters Model: DP10, DP12, DP16, DP18, DP20, DP22, DP24(Inner Bore 22mm) DP6, DP8(Inner Bore 27mm) pressure angle: 14.5° degree Outside Dia: 55mm Inner Bore: 22mm /27mm Material: HSS No1 :Z1213; No2 :Z1416; No3 :Z1720; No4 :Z2125; No5 :Z2634; No6 :Z3554; No7 :Z55134; No8 135. 1 Set x Involute Gear Cutters. Note: Please allow 0.1- 0.5 cm error due to manual measurement. The colors may have different as the difference display, please understand.