Table Size: 9.0″ x 42.0″. X-Axis Travel: 26.0. Y-Axis Travel: 12.0. Knee Travel: 16.0. Quill Travel: 5.0. Spindle Horsepower: 1 HP. Spindle Rpm: (8) 80 – 2720 RPM. Machine Weight: 2,200 lbs. Voltage: 220v – 3 Phase.

Follow these steps (see pic in last photo for details). Johansson Moldmaker’s Radial Arm Drill.

Gold kacha concentrator has almost wide application in all kinds of gold gravity solution plant. It can be used in placer alluvial gold sand, and also used in quartz vein gold grinding process. You can put the gold container river sand into the gold kacha and get the gold black sand concentrate. Also you can connect the gold wet pan mill with the gold kacha, and gold kacha can collect the gold from the slurry produced by the wet pan mill.

The Royal QG-42 is a round, smooth collet made in the United States by Royal Products. It measures 1 inch in size and is designed for use with CNC, metalworking, and machining centers.

This listing is for an “on-site” or “at your shop” Bridgeport milling machine service. Pricing is for Midwest region. We can go to any region however the price increases a bit. The things that can cause the price to fluctuate a bit is how far out you are from St. Louis Missouri, where we are located. Also, the condition of your machine, sometimes allows for options on site that cause the price to be a little higher. Typically though it’s your choice to replace these things while we are doing the service. This basic service includes a complete upper housing rebuild, the lower spindle housing gets tuned up and spindle bearings replaced, the transmission housing gets cleaned out and repacked with grease. Things that are an added cost in the head are the splined and spindle gear hubs And the bull gears. Also if your motor shaft is all banged up, sometimes a new motor is necessary, which would be an extra cost. The base of the machine gets completely disassembled, cleaned out and reassembled with new wipers, new leads, screw, bearings, and new nuts. The oil system gets checked and limiters get replaced if they’re clogged also a new reservoir on your oiler is included because they get brittle and have a tendency to crack overtime. Things that would be an additional charge are lead screws, the oiler pump itself, Power feed and read out. Obviously, there are quite a few things they could addressed as we proceeded through the machine that are not listed in the description. Get in touch via the messaging option for further details.

Type 150 Power Feed. Type 150 – Y Axis Cross Feed. Semi-automated machining on Class 1 mills to 3 hp. Peak Torque (full-wave SCR control compound DC motor): to 150 in. / 17 NM torque. Intermittent Torque: 120 in. / 13.6 NM. Continuous Torque: 100 in. / 11.3 NM. 50-35 IPM / 13-889 mm/min. Rapid Traverse: 35 IPM / 889 mm/min. Gear Reduction Ratio (motor to screw shaft): 72:1. Smooth surface finish at speeds as low as 0.5 ipm or 13 mm/min. Superior speed regulation, ramping, dynamic breaking, friction safety clutch and limiting circuit protection. Helical gearing and torque limiting friction saftey clutch with new and improved gear. Electrical: 110V, 50/60 Hz, 3 Amps. / 6.8 kg.

TECHNO ISEL DAVINCI CNC ROUTER/PROTOTYPING MILL KRESS ROIUTER W/ SAFETY ENCLOSURE. THIS UNIT IS IN GOOD WORKING CONDITION (COMPUTER/SOFTWARE NOT INCLUDED). COMES WITH EXTRA COLLET, ROUTER WRENCH, & DUST COLLECTING SHOP VAC. THIS UNIT IS OFFERED FOR SALE AS PICTURED. Size of unit : 32″ x 45″ x 66 (L x W x H). GREAT DEALS EXPORT WHOLESALE AUCTIONS.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices – Fast & Easy. 11.8″ X 11.8″ Y Fanuc ROBODRILL Alpha T14-iDs VERTICAL MACHINING CENTER, Fanuc 1. 11.8″ X Axis 11.8″ Y Axis Fanuc ROBODRILL Alpha T14-iDs VERTICAL MACHINING CENTER, Fanuc 16i-MB Cont. Ref # : 178191 iammdna XVMCTR. FANUC ROBODRILL MACHINING CENTER. MODEL: a-T14iDs, MFG: 2004. 24.8″ x 13″. X – AXIS TRAVEL…………………….. 11.8 / 300mm. Y – AXIS TRAVEL…………………….. Z – AXIS TRAVEL…………………….. 12.99 / 330mm. RAPID TRAVERSE X, Y, Z………………… FLOOR SPACE WITH PALLET CHANGER………. 40″ x 86″ x 90. FANUC MODEL: 16 i-MB CONTROL. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE.

Bridgeport 6F power feed controller with Seco Electronics Corp. D28595 (117VAC, 60Hz, 10A) and Boehm 4640 crossfeed motor milling machine assembly. From a closing industrial facility. Untested but presumed to be working well. The following information is provided by an AI description service. The Bridgeport 6F Power Feed Controller Seco D28595 Boehm 4640 Crossfeed Motor Assy is a specialized component designed for milling machines. This product is known for its quality and durability, making it a reliable choice for metalworking equipment in various industries. With the Bridgeport brand reputation and compatibility with milling machines, this power feed controller ensures precise and efficient control of the machine’s movements, enhancing overall performance and productivity in cutting and drilling tasks.

Machining Centers BT40 BT50-90 Degree Angle Head Side Right Angle Milling Head ER20 / ER25 / ER32 / ER40 Tool Holder. BT50-90 Degree-ER20/ER25/ER32/ER40 Single Head. Angle head is a kind of machine tool accessory, the machine tool installed with the angle head can rotate the center line of the tool and the spindle rotation center line at an angle to process the workpiece. The use of angle head, without changing the structure of the machine tool can increase its processing range and adaptability, so that some of the traditional methods difficult to complete the processing can be achieved, and can reduce the workpiece repeated clamping, improve processing accuracy and efficiency. It is widely used in various fields of machining, such as aviation, automobile, mold and die. 1x BT40 or BT50-90 Degree Angle Head 1x Wrench 1x Carrying Case. Unused/unopened merchandise will be fully credited. All emails will be answered within 24 hours.