COLOMBO ATC HIGH SPEED SPINDLE MOTOR. EMERSON (VFD) VARIABLE FREQUENCY DRIVE. COLOMBO ATC SPINDLE MOTOR. Dimension: L:14.5″ W:3.0″ H: 3.0. Spindle taper use tool holder size. 15ISO04211ERR (ISO15 /COLLET ER11). Electric spindle equipped with high precision bearings with NITRIDE OF SILICON SPHERES(CERAMIC). INPUT : 1 PHASE 24.0A 110-120V 50/60Hz. OUTPUT: 3 PHASE – FREQ 0.1-550 Hz , 5.2A. Spindle motor appears to be lightly used. Has been tested, fully operational, run smooth and powerful. It has signs of minor scratches, dings, scuff… Is in overall great condition. Colombo Spindle motor , Emerson VFD Drive, wrench set, Four(4) Tool Holders, Instruction Manual. The item “PDS G. COLOMBO ATC (Auto Tool Change) HIGH SPEED SPINDLE MOTOR” is in sale since Monday, October 16, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “greatest_choice” and is located in U.S.A. This item can be shipped to United States.

• Brand: G.Colombo
• MPN: Does Not Apply

Up for sale is a new G0704 Quick Change Pneumatic Tool Changer. This is a pneumatic, foot operated tool changer for the G0704. It will work with both Manual and CNC conversion. With this Pneumatic draw bar conversion, you can change tools in seconds instead of minutes. It also reduces the wear on the draw bar by not unscrewing and re screwing collets constantly. The kit comes with everything you need to change over your mill to a quick tool changer. I will include basic instructions for install and setup. Installation only takes 30 minutes. There is no modification of your mill. It couples right up to your air supply and 110 PSI is recommended for operation. Quick tool changer bracket. Pneumatic Foot Control Pedal. 24 feet of Pneumatic hose. New drawbar with R8 3/4 collet and springs. 4 bolts for mounting bracket. You will need tool holders for this system to work. This setup is designed to work with 3/4 Straight ER Collet holders. You can use ER16 , ER20, or ER32. The Tormach Tooling system will also work with this setup. If you have any questions, please free to ask. I also offer discounts, please contact me for details. This kit will not work with a G0704 that has had belt drive conversion completed. If you have a Belt Drive conversion, please contact me as I have another kit that will with a Belt drive conversion. The item “G0704 Quick Change Pneumatic Tool Changer with Foot Control” is in sale since Tuesday, May 16, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “icer351″ and is located in Lenexa, Kansas. This item can be shipped to United States.

• Brand: G0704 Quick Change Tooling
• MPN: Does Not Apply

Bridgeport 2 hp Head. This is a bridgeport head that was on a tracer machine, this has the quick change 30 spindle. We ran this unit and it sounds good… Thank you for your Business! The item “Bridgeport Milling Head 2 HP with Quick Change 30 Spindle” is in sale since Thursday, February 16, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tooltimes2″ and is located in Oregon, Ohio. This item can be shipped to United States.

• Brand: Bridgeport

The CNC conversion was done with a CNC Fusion ballscrew kit. The X axis is a 425oz in, Y is 280 oz in, and Z is 420oz in driven by DM542A digital stepper motor drivers. There is a 4th axis driver installed and wired for use with a 4th axis (not included). The spindle is a 500w brushless motor from the LittleMachineShop mini mill/Sieg SX2 and has a pneumatic quick change tool with C3/4 Tormach collet for use with TTS collets or 3/4 shank tools. This is by far the best way to use a CNC machine in my opinion. No messing around with wrenches changing R8 collets. Just push a button and the TTS collet drops out so you can swap it out easily and tool free. Includes rolling enclosure that is set up for flooded coolant. There are two loc line nozzles attached to a magnetic base connected to a submersible pump in a reservoir below the machine. The coolant drains out through a screen back into the reservoir with a secondary catch basin for contaminants/chips. The control box was custom made with an ethernet smoothstepper, 4 DM542A digital stepper motor drivers, a MeanWell 1000W 48V PSU, CNC4PC C6 Spindle control board, and some voltage regulators. There is also a fan installed. There is an e-stop switch on the front as well as a button to release the collet (there’s another button on the spindle head), and a spindle control switch. The spindle can be controlled manually with a knob on the control box or switched to be controlled with the computer through mach. The ethernet smoothstepper is one of the best aspects of this as it means this machine can be used with any computer and there is no need to use one with a parallel port and it supports Mach4. This includes a Windows 7 computer w mach3/cad/cam all ready to go and configured to get using it immediately. Also included is a 1/2″ drill chuck on TTS shank, a 4″ vise with rotating base, USB pendant for jogging etc, clamp kit, and a parallels set. There is also a 38000 rpm pencil grinder attachment on the left side of the spindle for high speed engraving etc. I also installed a tachometer on the face of the spindle to see the RPM of the spindle but never finished it. I can finish it at the buyers request if needed. Feel free to ask any questions you may have. The item “Sieg X2 CNC Fusion Mini Mill with Brushless Spindle, Quick Change Tooling + MORE” is in sale since Saturday, July 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “laeauctions” and is located in Los Angeles, California. This item can’t be shipped, the buyer must pick up the item.

Up for sale is a new G0704 Quick Change Pneumatic Tool Changer. This is a pneumatic, foot operated tool changer for the G0704. It will work with both Manual and CNC conversion. With this Pneumatic draw bar conversion, you can change tools in seconds instead of minutes. It also reduces the wear on the draw bar by not unscrewing and re screwing collets constantly. The kit comes with everything you need to change over your mill to a quick tool changer. I will include basic instructions for install and setup. Installation only takes 30 minutes. There is no modification of your mill. It couples right up to your air supply and 110 PSI is recommended for operation. Quick tool changer bracket. Pneumatic Foot Control Pedal. 24 feet of Pneumatic hose. New drawbar with R8 3/4 collet and springs. 4 bolts for mounting bracket. You will need tool holders for this system to work. This setup is designed to work with 3/4 Straight ER Collet holders. You can use ER16 , ER20, or ER32. The Tormach Tooling system will also work with this setup. If you have any questions, please free to ask. I also offer discounts, please contact me for details. This kit will not work with a G0704 that has had belt drive conversion completed. The item “G0704 Quick Change Pneumatic Tool Changer with Foot Control” is in sale since Tuesday, January 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “icer351″ and is located in Lenexa, Kansas. This item can be shipped to United States.

• Brand: G0704 Quick Change Tooling

3 Axis CNC Knee Mill w/Quick Change Tooling. Includes 6 machinist vise. Table 42 x 9. Travels X28 Y13 Z4. Variable Speed Head 58-4200 rpm. Guarding to keep coolant in. Trak CNC 2 control. Programmable 3 Axis Control. This is a conversational control that predates ProtoTrak. Programs must be entered manually. Conversational only (no G-code). Comes with a programming manual with notes added to make it easier to use. I created a spreadsheet to simplify programming. Copy and paste operations to build your program on your laptop. The program must still be entered manually but the laptop can be set next to the control for reference. This way your program will be saved on your computer for future use. This programming aid and other sample programs will be included. The mill has low hours. The ways and ball screws are in like new condition. No marks or dings in table. Can be used to manually power feed in any axis without writing a program and with DRO. Powered up for your inspection. The item “3 Axis CNC Knee Mill withQuick Change Tooling” is in sale since Tuesday, October 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “handytooling” and is located in Sheboygan Falls, Wisconsin. This item can’t be shipped, the buyer must pick up the item.

• Brand: Trak CNC2
• Country/Region of Manufacture: United States

Spring cleaning has come early for us and we’re cleaning house! If these items don’t sell, they go to Mother Earth and NOBODY wants to see that! Bridgeport R8 Quick Change Tool Holder System with Boring Bar, Albrecht Drill Chuck and End Mill Holders. CONDITIONS OF SALE: AS-IS, WHERE-IS. NO WARRANTIES EXPRESS OR IMPLIED. Package size and weight are ESTIMATES we use when listing the item. The item “Bridgeport Quick Change Tool Holder System R8 Boring Bar, Albrecht Drill Chuck” is in sale since Friday, February 19, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “chickenfriedsteak9090″ and is located in San Francisco, California. This item can be shipped to United States.

NICE BRIDGEPORT QUICK CHANGE TOOL MASTER. The item “NICE BRIDGEPORT QUICK CHANGE TOOL MASTER” is in sale since Monday, September 07, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “randc_inc” and is located in El Monte, California. This item can be shipped to United States.