There is not a single spot of rust anywhere on the machine. I can load the machine in my truck and deliver it within a 5 hour drive of my home in Asheville, NC. I have every box, manual, receipt, piece of documentation, etc. That the mill came with. I also have a gallon of Qualichem XTREME cut 251C which has never been opened. Machine comes on deluxe machine stand with flood coolant. Flood coolant has never been set up as I have only cut aluminium. Comes with touch screen, usb port, mouse, keyboard, all mounted on a custom enclosure with extra lighting (adjustable drop lights with LED bulbs). Complete 8 4th axis kit already installed and working perfectly. 5C collet fixture for 4th axis. The machine is in excellent, lightly used condition. There are a couple small dings in the machine table from where I clamped the 4th axis (see photos next to the dime). I have since changed the way I clamp the 4th axis to avoid this. There are also a few scratches in the paint of the chip tray (also shown in photos). The item “Like New Tormach PCNC 1100 with complete 8 4th axis kit and 5C collet fixture” is in sale since Tuesday, February 20, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “snufferdoo” and is located in Asheville, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Tormach

This is a circa 1950s Original Benchmaster Milling Machine in absolutely outstanding condition. Ways are all in beautiful condition and table moves butter smooth. Extremely smooth and tight for such a small machine. This milling machine comes exactly as shown with the original stand and all components shown in the pictures. Also comes with the EXTREMELY RARE factory horizontal conversion kit. This machine was owned by a man named Harry Boller of Boller Chivens Telescope Company. I never used this machine, but it is truly beautiful. It has all of its original paint and seems to be complete in every way. Both motors are the only components that look like they were replaced. This machine turns on and runs beautiful. I think this machine should either be cleaned up, used and loved, or placed in a museum. Thank you for looking and please contact me with any questions or concerns. Im open to ALL offers. The item “Benchmaster Vertical and Horizontal Milling Machine Complete and Original Mill” is in sale since Wednesday, January 31, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “customfabfoodie” and is located in Las Vegas, Nevada. This item can’t be shipped, the buyer must pick up the item.

Double seals design for better protection against water. Advanced optical measuring system. High noise immunity and EMC design. High reliability and durability switch design. Robust casting, chromium plated panel. Ultra low temperature rise transformer. Can be easily installed. Mid-split Function Simple R Function. Smooth R Function Divide the perimeter of circle. Save 200 workpiece zero points Divide holes on an oblique line. Mathematics calculation Tool diameter compensation. Bevel process Zero location autorest. 970, 920,870, 820, 770, 720, 670, 620, 570, 520, 470, 420, 370, 320, 270, 220, 170 and 120 mm/ 5um. Y ou may choose any two scales within the 970/470mm/5um range. Scale length above refers to the real travel of the linear. We supply slim scale KA500 model to fit the cross slide of your lathe. Each KA500 scale costs an extra 20 USD. Actual physical length is 143mm longer than travel. One inch equuals to 25.4mm. Content in the system. This is a complete kit. You just need to hook the readout system to your machine. It includes one guage (readout box, SDS6-2V with mill or lathe type swing arm), two scales (each with a 3 m cable, longer cables are available), protective covers, backing plates, brackets, an english manual and all the accessories for installation. We always choose door to door. 1, the type of your machine (mill, lathe, etc). 2, the travel of the scales. We are confident in the quality of our products. The item “SINO 2 axis digital readout (complete DRO kit for mill or lathe applications)” is in sale since Tuesday, November 24, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “aihu_us” and is located in , . This item can be shipped worldwide.

• Brand: sino
• Country/Region of Manufacture: China
• Model: SDS 2MS

Fully functional EMCO PC 55 Mill With 4. Converted with newer modern day electronics. Video on bottom of this page. Emco PC 55 Mill. Xbox 360 controller (runs machine). 20 Touch Screen Monitor on swing arm. Works with Mach3 screens. Axis with 4 Independent 4 jaws. Shown in pictures, see below. Smooth stepper LAN connection. Can adjust up to 80 or down. Easy to setup for 3d printing. This machine is fully functional and ready to work. All axiss have been tested for accuracy, repeatability, and backlash. X/Y/Z limit switches are all working and soft limits setup in Mach3 to prevent over travel. Encoder installed on the spindle head for Mach3 spindle speed feedback/control. Picture 12 shows the back panels removed for view of all the new electronics installed. New stepper motors, VFD, Gecko G540, ESS, line filter and more new electronics. Picture 6 shows the tools. 3 tool holders and a shell end mill cutter. They do have some surface rust, but work great. 9 collets, work for mm and in. 2 used end mills. Machine is fully capable of all the functions as a big cnc mill. I know the travel is small, but it fits through a standard doorway, fully enclosed and plugs into a normal outlet. Original manuals for the Emco Mill, Mach3 software, license file, Mach3 manuals, and a back-up of all the settings. The below specs current retrofit specs. Distance spindle nose – table surface (milling spindle vertical). Distance spindle nose – table surface (milling spindle horizontal). Clamping surface (L x D). Distance of T -slots. Clamping fixture similar to DIN 2079. Speed range (infinitely variable). Maximum torque on milling spindle. Drilling capacity in aluminium. Rapid feed in X/Y/Z. Operating feed in X/Y/Z (infinitely variable). 250 oz/in stepper motors. Do not recommend tapping with this. You can mount a servo motor to the head if you want to tap… Total length x total depth x total height. 840 x 865 x 710(mm). Everything can be run off from the same outlet. Diameter of table: 4 (100 mm). Morse taper center hole: MT2. Gear ratio 72:1. Quick disconnect on cord. 4 4 Jaw Independent Chuck. Jaws are individually adjustable. Clamping Range A-A1: 0.236-1.772. Jamming Range B-B1: 1.575-3.937. Unit is an older model, it is not new. It is used and you can find minor blemishes, scratches, and dents around unit. And 100% covered if instructions are followed. Please make sure you. Will offer a discount if picking up from my location. Will help with loading and any questions. If you see a past. The item “EMCO PC 55 CNC Mill With 4th Axis Converted Mach3 Free Shipping Complete Package” is in sale since Thursday, April 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “erl_distributing” and is located in Marne, Michigan. This item can be shipped to United States.

• Brand: Emco
• MPN: Does Not Apply
• Country/Region of Manufacture: Austria

So he’s the boss so we just ordered a new one and I have now been tasked to sell this one. As mentioned we did not hook up the wires(which is only 4) or fill with oil. I will tell you that the unit ran fine before the motor replacement but someone complained that it seemed to be running slow and that it may need new brushes. Then the motor was bought and now a entire unit is on the way. You will get the entire unit including the rod and stops and center support. It is pictured with the dial and handle but it will NOT be included in the sale. This sale will be final so make sure it will fit your mill if it is not a Bridgeport. UPDATE – This listing will be listing will be for PARTS ONLY. Please remember that you will need to wire and add oil to make this feed work. Well here we go again. We have had many of you requesting to see the motor end, gears and the gearbox so in the morning we will once again take apart the unit and update with additional photos. I have had all kind of questions concerning the type of sealant we used, wanting to see the end of the motor to confirm its age and what the torque specs were when we reassembled. This seems to be the easiest way(not for me) for you to ensure the reassembly is just the way you desire. I will upload the additional pics. Please remember that this will not be in running condition when it arrives to your location! At a 55 degree angle relative to the sun or anything else! NEW PICTURES ARE UPDATED! The item “BRIDGEPORT Mill 6F X-AXIS Power feed with rod center support and stops. Complete” is in sale since Wednesday, September 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “husaler” and is located in Pensacola, Florida. This item can be shipped to United States.

• Brand: Bridgeport
• Country/Region of Manufacture: United States
• Model: 6F

This item was removed from a working Sherline CNC machine. The lead screw and nut have some wear from use. Comes complete with Stepper motor mount, keystock for locating head and mounting screws. Please have a look at my other Sherline Mill items and Industrial items up for sale. The free listing tool. The item “SHERLINE MILL CNC 5400 MILL BED COLUMN Z AXIS COMPLETE WITH STEPPER MOTOR MOUNT” is in sale since Wednesday, November 04, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “artcase” and is located in Erlanger, Kentucky. This item can be shipped to United States.

This Model MF mill performs normally but should have the belts replaced and the outer covering on the electrical cord is deteriorated due to age. It comes with all of the attachments and cutters shown. This is a nice package. It is located about 7 miles south of Penn Yan, NY 14527. The item “Atlas Milling Machine, Complete Package, No Reserve” is in sale since Tuesday, October 27, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “muskett1″ and is located in Penn Yan, New York. This item can’t be shipped, the buyer must pick up the item.

Unimat 3 emco milling table ref 150-350 complete.The item “UNIMAT 3 EMCO MILLING TABLE REF 150-350 Complete” is in sale since Wednesday, April 22, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ksmwc2010″ and is located in Westerville, Ohio. This item can be shipped to United States.

• Brand: EMCO UNIMAT 3
• Model: UNIMAT 3
• Country/Region of Manufacture: Austria