Sign up to Newsletters. Brand New AL-310S X-Axis Power Feed Kit For Milling Machine. Our Brand New AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). To stop jog operating, you must first turn FEED KNOB to 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Brand new power feed. X traverse (left-right travel). Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “SHARPS X AXIS POWER FEED BRIDGEPORT MILLING MACHINE POWER FEEDER NEW” is in sale since Monday, April 2, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “beautysupplyworld” and is located in Ontario, California. This item can be shipped to United States, Canada, Germany.

• Brand: Vevor espesartita
• MPN: FRCXZ00655
• Bundle Listing: Yes
• Model: AL-310S
• Country/Region of Manufacture: CHINA
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs

Sign up to Newsletters. Brand New AL-310S X-Axis Power Feed Kit For Milling Machine. Our Brand New AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). To stop jog operating, you must first turn FEED KNOB to 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Brand new power feed. X traverse (left-right travel). Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “SHARPS X AXIS POWER FEED BRIDGEPORT MILLING MACHINE POWER FEEDER NEW” is in sale since Monday, November 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qiannlan-3″ and is located in Ontario, California. This item can be shipped to United States, Canada, Germany.

• Brand: VEVOR
• MPN: ICXCX004
• Bundle Listing: Yes
• Model: AL-310S
• Country/Region of Manufacture: CHINA
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs

I have turned this unit on, and it does run. Variable speed works on it. I have not installed this on a milling machine. The toggle handle of the power switch is broken. It will likely need replaced. This may not be a complete kit necessary for conversion! I do not know if all conversion parts are included. What you see is what you get. The item “X AXIS POWER FEED BRIDGEPORT MILLING MACHINE POWER FEEDER S34237 HARBOR FREIGHT” is in sale since Wednesday, November 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “nick1911cpt” and is located in Shawnee, Kansas. This item can be shipped to United States.

• Brand: Harbor Freight

You are looking at a new X Axis Power Feed for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more. As long as it is the Bridgeport Type Machine, it should fit. This set includes everything you should need to install this power feed, including the power feed unit, table mounting bracket, drive gear, shims, safety stop, and hardware. These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. Portable X-Axis Mill Fit Bridgeport Table Milling Machine Power Feeder 110V. You are looking at a new. X Axis Power Feed. For Bridgeport and Similar Knee Type Milling Machines. Size: 74mm x 87mm x 26.8mm Color:White Power: 110V. 1 x Milling machine power feeder. Orders on Saturday or Sunday will be proceed on following Monday. Please be noted that, this service is more recommended for Monday-Thursday orders. Orders on Friday may be processed on following Monday by UPS, according to UPS’s policy. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. Pro Electric 4 Frame Stainless Steel Honey Extractor Beekeeping Equipment Drum. 25LB 13GPM Gallon Per Minute Grease Trap Stainless Steel Kitchen Interceptor. Manual Pipe Tube Bender Set 3/8″ 1/2″ 9/16″ 5/8″ 3/4″ 7/8″ 1 W/ 7 Dies Tool kit. 550ml Manual Liquid & Paste Filling Machine For Cream Shampoo Cosmetic Filler. Pro 50ft 1/2 Electric Auger Drain Cleaner Machine Cable Clog Sewer Snake Cutter. Badge Button Maker Press Machine W/1000 Making Supplies Mold Size 2.25/58mm US. HS-8 8-In Manual Hand Plate Shear Solid & Precise Sheet Metal Plate Shear Tool. 6 Dies Sheet Metal Bead Roller Steel Gear Drive Bench Mount 18-Gauge Capacity. 1/4″ Round Steel 1×3/16″ Flat Steel Metal Manual Ring Tube Roller Rolling Bender. The item “Portable X-Axis Mill Fit Bridgeport Table Milling Machine Power Feed Feeder 110V” is in sale since Sunday, February 05, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “teammadegroup2011″ and is located in CA/KY. This item can be shipped to United States.

• Brand: Unbrand
• MPN: TP-E-0089
• UPC: Does not apply

Power feed X axis. Torque: 150in-lb peak / 119in-lb continuous. Feed rate: 0.4 to 37.4 IPM. Variable speed: 0-140 RPM. For 5/8 shaft with keyway. No more gear charge hassles. Fits all Bridgeport style machine. Weight: 9.85lbs (just machine). Overall dimension: 5”L x 8/38”W x 11-1/4”H. THANK YOU FOR VISITING. The item “150 LBS Power Feed Table X Axis Fits bridgeport Acer Mills Milling Feeder” is in sale since Thursday, September 14, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “prolinemax” and is located in Los Angeles, California. This item can be shipped to United States, Canada.

• Brand: Unbranded/Generic
• MPN: Does Not Apply

You are looking at a new X Axis Power Feed for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more. As long as it is the Bridgeport Type Machine, it should fit. This set includes everything you should need to install this power feed, including the power feed unit, table mounting bracket, drive gear, shims, safety stop, and hardware. SHARPS X AXIS POWER FEED BRIDGEPORT MILLING MACHINE POWER FEEDER NEW. These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. Size: 74mm x 87mm x 26.8mm. Power: AC 110V 50/60Hz. 1 x Milling machine power feeder. Be applied to your order immediately. Please be attentions, this service is more recommended for Mondy to Thursday orders. Orders on Friday may be processed on following Monday by UPS, according to UPS’s policy. Used items will not be accepted for return. Our working time: (GMT +8) 9:0018:00. We appreciate your business and strived to improve our customer service and our commitment to quality. Work with you to have it resolved. The item “SHARPS X AXIS POWER FEED BRIDGEPORT MILLING MACHINE POWER FEEDER NEW” is in sale since Sunday, February 05, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ka-floor” and is located in CA,KY. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: KR-A-0226
• UPC: Does not apply

Those who know Hardinge Lathes know that they are a virtual powerhouse in a small package. This is an OEM package, not a retrofit by an individual. Runs like a sewing machine. Ready to jack in to the network and start making parts. Just tell it how many and push the button. Come back later and you have a bucket full of parts. Even a Compression tapping head. It hugs a wall and is a great chucker for small parts too–a wonderful addition for your shop. The item “CNC LATHE WithBAR FEEDER HARDINGE FAGOR SAMECA BAR FEEDER” is in sale since Sunday, May 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “sprayrider” and is located in Brookville, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Millport

ZX45 A: Mill Drill. ELECTRICAL SPECIFICATIONS: AMP: 7; HP: 2; Motor Type: AC Phase: Single; Volt: 220 A/C. MILL/DRILL SPECIFICATIONS: Column: Dovetail Ways Dial Calibration Drill-Coarse Feed: 0.045″ Dial Calibration Mill-Fine feed: 0.001″ Dial Calibration X-Axis: 0.001″ Dial Calibration Y-Axis: 0.001″ Draw bar Size: 7/16″ Drill Chuck Size: 5/8″ (Not included) Drill Chuck Arbor: R8/JT3 Feed Rate (X-Axis). 945-3.307 Feed Rate (Y-Axis). 945-3.307 Feed Rate (Z-Axis). 0024.0118″ Rotating Mill Head: 90°(Left and Right) Head Travel: 16-1/4″ Quill Diameter: 3″ Quill Travel: 5″ Spindle Center to Column: 11″ Spindle to Table (Distance): 0″ to 16-1/4 Spindle Speeds: 95, 175, 310, 450, 850, 1500 Spindle Taper: R8. TOOL SIZE LIMITS: Drill Capacity: 1″ Face Mill Capacity: 3″ End Mill Capacity: 1″ Tapping Capacity: 1/2″ X-Axis Travel: 25″; Y-Axis Travel: 6-3/8″. If you have any questions regarding our products or services, please give us a chance for correction. Please do not leave a negative or neutral feedback. We will do our best to fix it. We care about our customers, and we strive to bring you the best customer experience ever. You will receive a response within 24 hours. Feed Back: If you are considering leaving negative or neutral feedback, please give us the opportunity to resolve the issue first. The item “Bolton Tools 9 1/2 x 40 Gear Driven Milling Machine with Power Feeder ZX45A” is in sale since Tuesday, August 25, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “boltontools” and is located in Rowland Heights, California. This item can be shipped to United States, to Canada.

• Brand: Bolton Tools
• Model: ZX45A
• MPN: PR145SS
• UPC: 701233990976

Application:Mill X axis. Max torque:155/cm-kg, 135/in-lb. The item “Mill machine X axis Power table feed, APF500X 110V Auto Power feeder mill drill” is in sale since Monday, August 10, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “88490755″ and is located in shenzhen, . This item can be shipped worldwide.

• Brand: TONGE
• Model: APF-500X
• Country/Region of Manufacture: China
• MPN: no have