Condition: Used – Good Working Condition. This OEM Haas Tool Release Piston (TRP) was removed from a 1993 Haas VF-3 vertical machining center that was in full operational service. It has been cleaned, inspected, and shows standard cosmetic wear consistent with normal use. No cracks or leaks observed at time of removal. Function: Controls the pneumatic actuation of the drawbar for tool clamping/unclamping. Mounting: Bolt-on under spindle head with integrated pneumatic ports. Material: Anodized aluminum body with internal piston seals. Includes: Piston housing assembly only (no solenoid or air lines included). Condition: Clean threads and fittings; no stripped holes; smooth actuation. Genuine Haas OEM component (not an aftermarket clone). Restored from a running 1993 VF-3 machine. Compatible with umbrella and early side-mount tool changers. Leak-free and ready to install with new O-rings (recommended). Some external wear and light residue from normal shop use. Tested manually for free movement; not bench-tested under air. No visible structural damage. Designed for direct replacement or repair of early Haas VF-series vertical mills, including VF-1 through VF-4. Compatible with 40-taper spindle configurations.

Milling machine accessory – ACLASS X-Axis Power Feed APF-750X fits Bridgeport. Made in Taiwan Model #: APF-750X Power Table Feed for Bridgeport-style milling machines (X-Axis). Comes with electro-magnetic clutch. Easy to operate, quiet operation. Speed control knob is conveniently located and easy to turn. JOG FUNCTION works at any speed for operator to easily find the work piece to be machined. Speed range: 0 210 rpm Max torque: 152 in-lb. (175 cm-kg) Power source: 110VAC 50/60Hz. If You have any questions regarding this item, please let us know we’ll be happy to help.

This protective cover helps shield critical X-axis components from chips and coolant. Perfect for VF-2, VF. Part Number: 93-5501. Application: X-Axis Way Protection. Type: Accordion-style cover assembly. Material: Industrial-grade steel. Mounting: Standard VF-2 configuration. Removed from 2001 Haas VF-2. All mounting points intact. Proper accordion fold function. Normal shop wear. Cleaned and inspected. Direct bolt-on for VF-2 models. Standard mounting configuration. Complete assembly included.

Milling Machine Accessory – Right Angle Attachment R8 fits Bridgeport. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078″) WHAT YOU’LL RECEIVE Right angle attachment, R8 stub arbor, Drawbar extension socket, 7/16-20 bolt with 1/2″ hex head Wooden box. If You have any questions regarding this item, please let us know we’ll be happy to help.

Milling Machine Accessory – Right Angle Attachment R8 fits Bridgeport. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078″) WHAT YOU’LL RECEIVE Right angle attachment, R8 stub arbor, Drawbar extension socket, 7/16-20 bolt with 1/2″ hex head Wooden box. If You have any questions regarding this item, please let us know we’ll be happy to help.

ALIGN(or Bestline) Power Feed for Z-Axis AL-500PZ fits Bridgeport. Brand: ALIGN (Bestline) Model #: AL-500PZ. Power Table Feed for Bridgeport-style milling machines (For Z-axis). AL-500PZ is used for the Z-axis (milling machine knee up/down). Automatic shut-off at end of cut. Travel stop/ limit switch assembly with rail. Packaged in eco-friendly box without Styrofoam. Torque, Average: 150 in-lb Torque, Peak: 650 in-lb. Speed range: 4 160 rpm, 200 rpm max. Power source: 110VAC 50/60Hz Single-phase. If You have any questions regarding this item, please let us know we’ll be happy to help.

Milling Machine Accessory – Right Angle Attachment R8 fits Bridgeport. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078″) WHAT YOU’LL RECEIVE Right angle attachment, R8 stub arbor, Drawbar extension socket, 7/16-20 bolt with 1/2″ hex head Wooden box. If You have any questions regarding this item, please let us know we’ll be happy to help.

This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power drawbar will fit Bridgeport and most other import. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, and believe me its more than enough pressure to do the job. Please note: This will not fit the Bridgeport J head machines… J-head power drawbars include 3 spacers for mounting. Please Note Concerning Mounting. There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine if this product will fit your mill. If your holes do not line up, this product can still work if you are willing to locate, drill and tap 2 mounting holes. Measure and be sure, thanks!

Milling Machine Accessory – Right Angle Attachment R8 fits Bridgeport. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078″) WHAT YOU’LL RECEIVE Right angle attachment, R8 stub arbor, Drawbar extension socket, 7/16-20 bolt with 1/2″ hex head Wooden box. If You have any questions regarding this item, please let us know we’ll be happy to help.

APPEARS TO BE IN GOOD USEABLE CONDITION.