HI YOU ARE LOOKING AT A POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET, MSC, ATRUMP, WT TOOL, ACRA, ACER, CHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE.
Comments Off
HI YOU ARE LOOKING AT A PNUEMATIC IMPACT POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET, MSC, ATRUMP, WT TOOL, ACRA, ACER, CHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE AND TO DAMPEN ANY VIBRATION FROM THE HEAD. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. HANDLE FULLY ADJUSTABLE TO FIT YOUR PREFERENCE AND TO TAKE UP ANY WEAR THAT MAY TAKE PLACE OVER TIME. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. IF YOUR COLLET STICKS IN THE SPINDLE RETURN THE IMPACT TO THE TOP AND BRING IT DOWN AND STRIKE THE DRAWBAR AS YOU WOULD WITH A HAMMER THERE IS ALSO A REGULATOR BUILT IN THE IMPACT WRENCH TO KEEP FROM OVER TIGHTENING THE DRAWBAR.. ALL OF THE MAIN BODY IS MADE AND ASSEMBLED IN OUR SHOP HERE AT M&T MACHINE , TAYLORSVILLE N. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. The item “PNUEMATIC IMPACT WRENCH POWER DRAWBAR BRIDGEPORT OR IMPORT MILLING MACHINE” is in sale since Tuesday, February 19, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can be shipped worldwide.
Comments Off
This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power draw bar will fit Bridgeport and most other imports. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, which is the maximum for this butterfly impact, and believe me its more than enough pressure to do the job. You will LOVE this product! Please note: This will not fit the Bridgeport J head machines, see my other listings for J head power drawbars…… There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine if this product will fit your mill. If your holes do not line up, this product can still work if YOU are willing to locate, drill and tap 2 mounting holes. You are a skilled machinist, measure and be sure, thanks…… The item “Air Operated Power Draw Bar for Bridgeport & Import mills” is in sale since Tuesday, February 5, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped to United States.
Comments Off
HI YOU ARE LOOKING AT A PNUEMATIC IMPACT AIR OPERATED POWER DRAWBAR FOR A CNC MILL STEP PULLEY HEAD IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET, MSC, ATRUMP, WT TOOL, CHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. ALL PARTS MADE IN OUR SHOP HERE AT M&T MACHINE , TAYLORSVILLE N. 28681 USA EXCEPT THE IMPACT WRENCH AND FASTENERS. WE DEVELOPED THIS POWER DRAWBAR IN OUR SHOP BEWARE THERE ARE INFERIOR COPIES OUT THERE BUT GET THE ORIGINAL HERE. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. THEIR ARE COPIES OUT THERE PLEASE SUPPORT OUR TIME SPENT ON RESEARCH AND DEVELOPMENT YOU WILL NOT REGRET IT {REQUIRES YOU DRILL THREE 1/4-20 HOLES IN THE TOP OF YOUR MILLING HEAD TO MOUNT THE POWER DRAWBAR} INSTALLATION INSTRUCTIONS INCLUDED. THANK YOU VERY MUCH FOR LOOKING. The item “VMC CNC MILLING MACHINE POWER DRAWBAR FOR J HEAD BRIDGEPORT OR IMPORT MILL” is in sale since Saturday, June 28, 2014. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can be shipped worldwide.
Comments Off
This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power draw bar will fit Bridgeport and most other imports. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, which is the maximum for this butterfly impact, and believe me its more than enough pressure to do the job. You will LOVE this product! Please note: This will not fit the Bridgeport J head machines, see my other listings for J head power drawbars…… There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine if this product will fit your mill. If your holes do not line up, this product can still work if YOU are willing to locate, drill and tap 2 mounting holes. You are a skilled machinist, measure and be sure, thanks…… The item “Power Draw Bar for Bridgeport & Import mills” is in sale since Tuesday, February 16, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped to United States.
Comments Off
This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power drawbar will fit Bridgeport and most other import. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, and believe me its more than enough pressure to do the job. You will LOVE this product! Please note: This will not fit the Bridgeport J head machines, see my other listings for J head power drawbars…… There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine.. If this product will fit your mill. If your holes do not line up, this product can still work if YOU are willing to locate, drill and tap 2 mounting holes. Measure and be sure, thanks…… The item “Power Draw Bar for Bridgeport & Import mills” is in sale since Wednesday, July 23, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped to United States.
Comments Off
We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned /Used Import Gearhead Vertical Milling Machine W/R8 Spindle… Similar But Not Clausing /Rockwell Type W/9.5″ x 27.5″ Table. Motor: 110V/60Hz / 1 – Phase 1.5 HP. Spindle Collar: 1.740. Spindle to Table: 17-3/4. Face Mill Cap: 3. End Mill Cap: 3/4. Tapping Cap: 1/4 Max. Y-Travel: 6-13/16 X-Travel: 19-13/16. Table Dimensions: 27-1/2L x 9-1/2W. Runs Great , Everything In Very Good Working Order As Well As A Very Nice Overall Condition!!! Safety Requirements & Standards. We’ll Provide Heavy Duty & Secure Packing/Skidding……. Or if you wish. Pick It Up Yourself, No Charge For Loading On Your Truck. Brenda & Cliff Davis. Cdavis (at) Davis Machinery (dot)com. The item “Milling Machine, Import Geared Vertical Mill, Not Rockwell/Clausing Built 2013+/” is in sale since Monday, January 30, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.
Comments Off
Hi you are looking at a power drawbar for a step pulley head import and bridgeport type milling machine. Jet, msc, atrump, wt tool, chevlair, enco, travers, supermax, and many more. The most simple and economical power drawbar out there. It works from air pressure 90 psi max. A hugh time and aggravation saver no lost time looking for your wrench or hammer. Main body made of 6061 aluminum, main front slide is made with steel rod and nylon bushing, for long life. One screw removes top part to give access to draw bar. Can be mounted in many positions around the head to fit your own preference. Comes assembled complete with impact wrench ready to mount on your mill and use. All parts made in our shop here at m&t machine , taylorsville n. 28681 usa except the impact wrench and fasteners. We developed this power drawbar in our shop beware there are inferior copies out there but get the original here. We have used this type power draw bar in our shop for more than 10 years with no problems. Their are copies out there please support our time spent on research and development you will not regret it {requires you drill three 1/4-20 holes in the top of your milling head to mount the power drawbar} installation instructions included. Thank you very much for looking.The item “BRIDGEPORT IMPORT MILLING MACHINE IMPACT WRENCH POWER FEED DRAWBAR STEP PULLEY” is in sale since Sunday, June 23, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can be shipped to North, South, or Latin America and to all countries in Europe and to Australia.
Comments Off
This is a pneumatic power drawbar that was used on a bridgeport series i. It mounted to the plate on that machine without any modification of the plate and it should work on any clone with the same hole pattern and thread. It was working when removed and was replaced with a mach-1 system. However, there is a small split ring and possibly an o-ring that are apparently missing. They are items 43 & 56 in the parts list (last picture).
The o-ring should be easy to come by and the split ring could be easily made out of wire. The split ring is the socket retaining ring and it helps to hold the socket in place so you don’t have to keep track of a loose socket.
The ring springs out to hold on the small groove/indents in the square drive cavity of the socket i. Where the ball in the drive on a normal socket wrench locks in. The split ring goes in the groove on the end of the square drive shown in the third picture. I used it for quite awhile without the socket retaining ring. A standard socket that fits your drawbar should work fine. My guess is that berny may have made the original patented version of this type of power drawbar based on the second picture, not sure.The item “PNUEMATIC IMPACT POWER DRAWBAR FOR BRIDGEPORT OR IMPORT MILLING MACHINE” is in sale since Wednesday, December 03, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “swibc” and is located in College Station, Texas.
Comments Off
