MILL X & Y LEAD SCREWS, NUTS & FEED NUT BRACKET, BEARING BRACKETS. COMES WITH ALL PARTS SEEN IN THE FIRST PHOTO. ALL COMPONENTS REMOVED FROM A BRAND NEW NEVER RUN MACHINE RETRO-FIT FOR CNC. BRIDGEPORT MADE SOME CHANGES AROUND 2010 AND ALTHOUGH THESE PARTS LOOK THE SAME, THEY WILL NOT FIT EARLIER MODEL BRIDGEPORTS. FOR EXAMPLE, — LEADSCREWS ARE COATED & SLIGHTLY LARGER. FEED NUTS RETAINED BY THREADED NUT AND LOCK. X-LEAD SCREW IS A BIT LONGER. BEARING BRACKETS HAVE THRUST BEARINGS. RETROFIT — THESE PARTS CAN BE RETRO FIT TO AN OLDER STYLE MACHINE. THE Y- SCREW IS NOT TO BAD JUST REFIT THE NEW NUTS TO. THE FEED BRACKET, X-AXIS REQUIRES CHANGING SCREW.

Found this while moving. I have had it for 10 years like this. It’s a good unit and screws turn good by hand. Technical service manual included. Motors are not emco. They are hybrid nema 34′s that we were doing a retrofit for. This is all I have for this model.

MILL X & Y LEAD SCREWS, NUTS & FEED NUT BRACKET, BEARING BRACKETS. COMES WITH ALL PARTS SEEN IN THE FIRST PHOTO. ALL COMPONENTS REMOVED FROM A BRAND NEW NEVER RUN MACHINE RETRO-FIT FOR CNC. BRIDGEPORT MADE SOME CHANGES AROUND 2010 AND ALTHOUGH THESE PARTS LOOK THE SAME, THEY WILL NOT FIT EARLIER MODEL BRIDGEPORTS. FOR EXAMPLE, — LEADSCREWS ARE COATED & SLIGHTLY LARGER. FEED NUTS RETAINED BY THREADED NUT AND LOCK. X-LEAD SCREW IS A BIT LONGER. BEARING BRACKETS HAVE THRUST BEARINGS. RETROFIT — THESE PARTS CAN BE RETRO FIT TO AN OLDER STYLE MACHINE. THE Y- SCREW IS NOT TO BAD JUST REFIT THE NEW NUTS TO. THE FEED BRACKET, X-AXIS REQUIRES CHANGING SCREW.

MILL X & Y LEAD SCREWS, NUTS & FEED BRACKET. These are NOT Bridgeport parts. Not sure what brand they are for, Millport is a possibility. Look at the pictures and let me know if you need more information.

IT HAS AN ALUMINUM BASE PLATE AND WELDED STEEL ANGLE FIXTURE. THE ANGLE IS 60 DEGREES APPROX. THERE ARE 3 SCREWS TO ADJUST THE HEIGHT AND ANGLE OF THE BASE PLATES. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. NO CRACKS OR REPAIRS. LOOK AT THE PICTURES. MAKE SURE YOUR REGISTERED STREET ADDRESS IS CLEAR AND UP TO DATE WHEN YOU GO TO PAY FOR THIS ITEM. I WILL NOT CHANGE IT FOR YOU AFTER THE SALE. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “h.resale_llc” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Bulgaria, Czech Republic, Finland, Hungary, Estonia, Australia, Greece, Portugal, Cyprus, Japan, Sweden, Korea, South, Indonesia, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, New Zealand, Philippines, Switzerland, Norway, Croatia, Republic of, Malaysia, Iceland.

Bridgeport Series I Miller Inv. Wired 220 volts 3 phase. Bijur one shot lube. Ball screws X & Y Axis. This machine was taken apart, cleaned, repaired and cycled by an ex-Bridgeport service technician. You may inspect this machine under power at our facility. We are the largest stocking dealer of used Bridgeport’s on the east coast. Not What You Were Looking For? Where we keep a wide selection of Machine Tools, Tooling Components, Parts, Accessories, and More in stock for your convenience. Skidding/Crating of items are extra costs. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mikekandu” and is located in this country: US. This item can be shipped to United States.

• Function: Milling
• Control: Manual
• Machine Type: Milling Machine
• Model: Series I
• Spindle Horsepower: 2 hp
• Brand: Bridgeport

Rebuilt Bridgeport 48 table. Bridgeport Table and Saddle Screws Inv. Table screw measures 59-1/4″ will fit a 49″ table. Saddle screw is 24 overall length. These are for the latest Bridgeport that are being built today. They will not fit on an older Bridgeport with a 48 table. Not What You Were Looking For? Where we keep a wide selection of Machine Tools, Tooling Components, Parts, Accessories, and More in stock for your convenience. Skidding/Crating of items are extra costs. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mikekandu” and is located in this country: US. This item can be shipped to United States.

• Machine Type: Bridgeport
• Brand: Bridgeport

Bridgeport Series II Mill. Z axis was sticking, has wear. New clockwork spring, handle. Was previously CNC and servos are removed. Parts machine or project. Ball screws on all axis. Has been sitting a while. Can load onto trailer, 3 pallets. The item “Bridgeport Series II 4 HP milling machine NMTB 40 ball screws” is in sale since Sunday, October 24, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wesmoto” and is located in Benton, Kentucky. This item can’t be shipped, the buyer must pick up the item.

• Spindle Horsepower: 4 hp
• Machine Type: Milling Machine
• Spindle Taper: NMTB 40
• Brand: Bridgeport

This was a tracer mill. It has a 9″ x 42″ table, ball screws on the x & y axis. The top of the knee ways are chrome and look nice. Let me know if it’s commercial or residential and if you have a dock/forklift. The item “Bridgeport Series 1 Mill Milling Machine Base, Knee, Saddle, Ball Screws Parts” is in sale since Wednesday, November 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lostcreekmachine” and is located in Ottawa, Illinois. This item can be shipped to United States.

• Machine Type: Milling Machine
• Brand: Bridgeport

SERVO 3 Axis CNC Knee Mill. This machine originally came with SERVO-II cnc system, it’s made by SERVO 20 years ago. We recently rebuilt this CNC knee mill. We installed new CNC control, servo motors/drivers and VFD. We reduced the price. We would also look at any reasonable offer! Brand new SERVO ORION servo motors for X, Y axis and Z axis(servo motor drivers the quill as Z axis). SERVO power feed for knee feed. Precision grounded ball screws for XYZ axis. 220v 3ph, HITACHI VFD for spindle motor, speed up to 5000 rpm. Table size: 10 x 52 (inch). Feed rate: 95 IPM. Home switches and limit switches for X/Y and Z axis. Limit switches for knee power feed. GSK980 CNC controller, one of most reliable CNC controllers on the market. USB port and RS232 interface available for data transfer. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “SERVO 3 AXIS KNEE MILL, NEW CNC AND SERVOS, BALL SCREWS, NEW VFD, POWER DRAW BAR” is in sale since Wednesday, February 6, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “toolguys2″ and is located in Eastlake, Ohio. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• MPN: KNEE-MILL
• Country of Manufacture: United States
• Brand: Servo