IF FOR ANY REASON ONE OF THESE SHOULD BE DAMAGED UNDER NORMAL USE, I WILL REPLACE IT FREE FOR YOUR LIFETIME. I TAKE CARE OF MY CUSTOMERS FIRST. A set of (two) vise stops made from aluminum 6061 and fitted with stainless hardware. My job is to please my customers. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1 inch thick. The picures show a 6 inch Kurt and a 4 inch Kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware. The item “SET OF 2 MACHINE SHOP VISE STOPS FOR CNC OR MANUAL MILL VISE WORK OR HOBBY” is in sale since Saturday, December 31, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Model: 101
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

NEW 1300 Lumen LED Task/Work Light Now About 30% Brighter NEW! Much brighter than a 50 watt Halogen at 1/5 power usage. Cool to the touch, never burn your hands! 10 watt high quality LED. Flexible goose neck: 24 (2 Ft). Light Size: 3 3/8″ wide x 4 3/8″ height. Comes with a 4 ft 110v grounded plug cord. ED light for any work bench, milling machine, lathe, drill press, etc. Can be adapted to many other applications. 85 volts to 250 volts. Up to 50,000 hours life. Flexible goose neck keeps the light where you need it. It is a very bright LED light for milling machines, lathes, and drill presses, but can also be adapted to fit other machines and applications. Just screw it to the clutch housing cover on your mill, plug it in and turn it on! If you have a different type of machine, tap 2 holes anywhere it’s convenient. The LED will be much cooler than Halogens and use less than 1/4 of the electricity. It comes with a 115v plug, but can be hard wired if preferred. The light has a voltage range of 85v to 250v. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. For all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “LED Work Light 24 Flex Gooseneck Bench Milling Machine Lathe Grinder 1300 Lumen” is in sale since Monday, February 22, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Eastlake, Ohio. This item can be shipped worldwide.

• Brand: Servo Products Co.
• MPN: LED-10W-FLEXB
• Country of Manufacture: United States

10 watt high quality LED. Flexible goose neck: 24 (2 Ft). Light Size: 4 1/2″ wide x 3 3/8″ height. Comes with a 4 ft 110v grounded plug cord. ED light for any work bench, milling machine, lathe, drill press, etc. Can be adapted to many other applications. 110 volts to 230 volts. Up to 50,000 hours life. Flexible goose neck keeps the light where you need it. We also have another model that is 30% brighter please see listing #. It is a very bright LED light for work benches, milling machines, lathes, drill presses, etc. But can also be adapted to fit other machines and applications. Just screw it to the clutch housing cover on your mill, plug it in and turn it on! If you have a different type of machine, tap 2 holes anywhere it’s convenient. The LED will be much cooler than Halogens and use less than 1/4 of the electricity. It comes with a 115v plug, but can be hard wired 230v if preferred. The light has a voltage range of 85v to 250v. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. For all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “LED Milling Machine Bench Work Light Bridgeport Supermax Lagun Lathe Grinder NEW” is in sale since Monday, January 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Eastlake, Ohio. This item can be shipped worldwide.

• Brand: Servo Products Co.
• MPN: 10-LED-FLEX
• Country of Manufacture: United States

2 NEW 1300 Lumen LED Task/Work Lights Now About 30% Brighter NEW!! Lot of 2 Lights. Much brighter than a 50 watt Halogen at 1/5 power usage. Cool to the touch, never burn your hands! 10 watt high quality LED. Flexible goose neck: 24 (2 Ft). Light Size: 3 3/8″ wide x 4 3/8″ height. Comes with a 4 ft 110v grounded plug cord. ED light for any work bench, milling machine, lathe, drill press, etc. Can be adapted to many other applications. 85 volts to 250 volts. Up to 50,000 hours life. Flexible goose neck keeps the light where you need it. You receive 2 lights with listing. See item id 121902812178 for Single Light. It is a very bright LED light for milling machines, lathes, and drill presses, but can also be adapted to fit other machines and applications. Just screw it to the clutch housing cover on your mill, plug it in and turn it on! If you have a different type of machine, tap 2 holes anywhere it’s convenient. The LED will be much cooler than Halogens and use less than 1/4 of the electricity. It comes with a 115v plug, but can be hard wired if preferred. The light has a voltage range of 85v to 250v. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. For all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “2 new LED Work Light 24 Flex Gooseneck Bench Machine Lathe Grinder 1300 Lumen” is in sale since Tuesday, May 03, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Eastlake, Ohio. This item can be shipped worldwide.

• Brand: Servo Products Co.
• MPN: LED-10W-FLEXB-2
• Country of Manufacture: United States

Surplus to our needs, a nice running Bridgeport, everything works fine, ways are good, Digital read out is accurate, head sounds fine, no surprises, lots of tooling as well. Has pump oiler, work light and lots of collets and a drill chuck, as well as a good vise. The item “Bridgeport Milling machine Digital read out, lots of tools ready to work” is in sale since Thursday, June 23, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “aandhusacom” and is located in Johnston, Rhode Island. This item can’t be shipped, the buyer must pick up the item.

Rims & Hub Caps. Hydraulic Tools & Equipment. Briggs & Stratton Parts. Milling Tools and Cutters. Indexable Tool Holders & Bars. End MIlls & Taps. Tool Boxes & Cabinets. Specialty Pumps & Motors. Antique Work Bench Manual Mill. The mill is 19″ Tall, by 17″ Long, by 9 Wide. The spindle moves freely, the table moves in both directions freely. There are NO collets except for the one in the mill holding a milling cutter. This item is in great shape BUT should be cleaned, checked and lubricated. We believe, but are not certain the milling machine is complete as photographed and offered. What you see is what you get. He collet measurements are as. 19 at the threaded end. Tapered end and 1.00 from the threads to very bottom of the taper. SEE OUR STORE FOR MORE HIGH QUALITY PRODUCTS AT VERY REASONABLE RATES! _gsrx_vers_526 GS 6.6.6 (526). The item “Antique Work Bench Manual Milling Machine” is in sale since Friday, September 12, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolscarsrus” and is located in Woodstock, Illinois. This item can be shipped to United States.

This is another piece of machinery surplus to our needs, closing a small tool room. It runs fine its a step pulley style, has a pump oilier and a built in light, nice Vise. Ways are shown in photos, it was just unplugged, was good running machine. We will load free ground or truck. The item “Bridgeport Milling machine power Feed, ready for work, lots of tooling N/R” is in sale since Tuesday, May 10, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “aandhusacom” and is located in Johnston, Rhode Island. This item can’t be shipped, the buyer must pick up the item.