Brand new 10pc 5v (c type) collet set for use with van norman milling machines. I have these custom made for me and they are unavailable from anyone else.

Hi you are looking at a power drawbar for a step pulley head import and bridgeport type milling machine. Jet, msc, atrump, wt tool, chevlair, enco, travers, supermax, and many more. The most simple and economical power drawbar out there. Just $124.00 for a limited time.

It works from air pressure 90 psi max. A hugh time and aggravation saver no lost time looking for your wrench or hammer. Main body made of 6061 aluminum, main front slide is made with steel rod and nylon bushing, for long life. One screw removes top part to give access to draw bar. Can be mounted in many positions around the head to fit your own preference.

Comes assembled complete with impact wrench ready to mount on your mill and use. All parts made in our shop here at m&t machine , taylorsville n. 28681 usa except the impact wrench and fasteners.

We developed this power drawbar in our shop beware there are copies out there but get the original here. We have used this type power draw bar in our shop for more than 10 years with no problems. Their are copies out there but please support us and our time invested in research and development you will not regret it {requires you drill three 1/4-20 holes in the top of your milling head to mount the power drawbar} installation instructions included.

The item “BRIDGEPORT AND IMPORT MILLING MACHINE J HEAD POWER DRAWBAR STEP PULLEY HEAD” is in sale since Thursday, March 29, 2012. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can only be shipped to Australia.

• Country of Manufacture: United States
• Brand: M&T MACHINE
• Model: DB1000-SP
• MPN: DB1000-SP

It features a 3/4 shank for ease of use as well as 4 carbide indexable cutters. The cutters are us made and are a standard sd-322p size. A great tool for surfacing large areas or for putting a chamfer on the edge of your material. A beautifully made tool ! Measures 2 in diameter at its maximum.
Extra usa made inserts are available for $6.50 each. Comes brand new in the box. Made by one of americas premier (but now closed) makers of fine tooling. All items are described to the best of my ability and questions are encouraged. I have no way to know when and if these charges will be applied.

And its directors against any damage or penalties associated with: 1. Compliance to current or future laws, rules or regulations pertaining to the use or possession of any equipment device or components, 2. Any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component.

The item “NOS USA AMERICAN SUN 2 45′ Chamfer Face Mill 3/4 Shk, Bridgeport DeckelL 750-2A” is in sale since Sunday, November 27, 2011. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jrwoodca” and is located in Merrickville, Ontario.

Draw bar length- 20-1/4 (tip to shoulder). Draw bar total length- 24-5/8. Draw bar length- 19 (tip to shoulder). Draw bar total length- 25-3/8. Draw bar length- 20-1/2 (tip to shoulder). All machine parts- maxi torque’s website. This item might be out of stock. If it is out of stock, the lead time is approximately 68 weeks. Here are your options if the item is out of stock. You can wait for the item to come in in the 68 weeks time frame.

Note: weight restrictions may apply in some cases. We guarantee the items are exactly as said in description. Supra machine tool appreciates your business very much.

Rbf products heavy duty vise/work stop. Up for sale is (1) rbf products heavy duty plated steel vise/work stop. Completely adjustable, the headed dme pin allows for stopping on the underside of part if desired. Material = black oxide steel body with hardened 10″ long 3/8″ diameter dme pin.

Base dimensions = 2.5″ wide x 3″ long x 1 thick with a. 530 diameter through hole for mounting to table top.

875″ diameter x 7″ long. Adjustable dme pin holder dimensions = 1.25″ wide x 2.75″ long x. Set screws are all brass tipped to prevent marring.

The item “Heavy Duty Table Mounted Mill Vise/Work Stop” is in sale since Tuesday, February 09, 2010. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rbf2007″ and is located in Loves Park, Illinois. This item can only be shipped to United States.

Cast aluminum with (24) 3/8-16 tapped holes. Dimensions: 13″l x 4″w x 3/4h. 22.04″l x 19.68″w x 29.13h. Travel of table forward & backward. Travel of table right & left. The item “OTMT Variable Speed Mini Milling Machine Model OT2213″ is in sale since Thursday, July 25, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “traverstoolco” and is located in Flushing, New York. This item can only be shipped to United States.

• Manufacturer Part Number: 87-115-905
• Part Brand: OTMT

Hi you are looking at a power draw bar for a variable speed r8 collet import and bridgeport type milling machine. Jet, msc, atrump, wt tool, acra, acer, chevlair, enco, travers, supermax, and many more.

Can be mounted in many positions around the head to fit your own preference. Handle fully adjustable to fit your preference and to take up any wear that may take place over time. Comes assembled complete with impact wrench ready to mount on your mill and use. If your collet sticks in the spindle return the impact to the top and bring it down and strike the drawbar as you would with a hammer there is also a regulator built in the impact wrench to keep from over tightening the drawbar.. All of the main body is made and assembled in our shop here at m&t machine , taylorsville n.

We have used this type power draw bar in our shop for more than 10 years with no problems. Any questions call 828-632-1500 home.

The item “BRIDGEPORT MILLING MACHINE POWER FEED POWER DRAWBAR 3/8 IMPACT WRENCH” is in sale since Sunday, June 23, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can only be shipped to Australia.

• Country of Manufacture: United States
• Brand: M&T MACHINE
• Model: DB-1000VS
• MPN: DB-1000VS
• UPC: 0610708255963

Mini pro tram sytem (model: 11-000). Square the head of a milling machine quickly and easily. Simply lower unit to table and adjust the head until both indicators read the same. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Shank diameter is 1/4″ (1/8″ version available). Indicator graduation 0.001″ & repeatability of 0.0002″. Includes calibration gage and padded case. The mini pro tram by edge technology has all the same great features of the full size pro tram but in a smaller package. The unit is perfectly sized for bench-top and mini-mill machines. Please request a package invoice before you pay.

Pro tram system demo video. Related products by edge technology. Please take a moment to check out the other high quality machinist gages and tools that we offer.

The item “Model #11 Mini Pro Tram by Edge Technology” is in sale since Tuesday, June 25, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Tucson, Arizona.

This item can only be shipped Worldwide.

• Brand: Edge Technology
• Model: Mini Pro Tram System 1/4″ Shank – 0.001 Graduation
• MPN: 11-000
• Used With: Mini Mills – Table Top Mills – CNC Routers
• Used For: Tramming or Square Spindle milling machine head