Item Description: Set 8 Pcs DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutters Model: DP10, DP12, DP16, DP18, DP20, DP22, DP24(Inner Bore 22mm) DP6, DP8(Inner Bore 27mm) pressure angle: 14.5° degree Outside Dia: 55mm Inner Bore: 22mm /27mm Material: HSS No1 :Z1213; No2 :Z1416; No3 :Z1720; No4 :Z2125; No5 :Z2634; No6 :Z3554; No7 :Z55134; No8 :=135. 1 Set x Involute Gear Cutters. Note: Please allow 0.1- 0.5 cm error due to manual measurement. The colors may have different as the difference display, please understand. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “otosmile” and is located in this country: CN. This item can be shipped worldwide.

• Model: DP6
• Brand: Unbranded
• Function: Milling
• Machine Type: Milling Machine

FADAL 904-1 VMC 2216HT CNC VERTICAL MACHINING CENTER w/TOOLING (Request Pics of Tooling). MODEL : 904-1 VMC 2216HT. FULL LOAD CURRENT: 45/22.5 AMP. SHORT CIRCUIT INTERRUPTING CAPACITY: 200 Ka. TABLE SIZE: 39″ x 16″. MAX TABLE WEIGHT: 750 LBS. SPINDLE MOTOR: 15 HP. TOOL CHANGER: 21 ATC (UMBRELLA). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “essindustrial” and is located in this country: US. This item can be shipped to United States.

• Brand: Fadal
• Spindle Horsepower: 15 hp
• Function: Milling
• Control: CNC
• Model Year: 1996
• Machine Type: Machining Center
• Voltage: 440 V
• Model: 904-1 VMC 2216HT
• Spindle Taper: CAT 40
• Country/Region of Manufacture: United States

Nakanishi nsk spindle Nr-303 With Motor Em25-5000 CNC HIGH SPEED 30K RPM. Tested working perfect, uses a dc brushless motor so you can use drives other than only the nsk drives which can be quite pricey. Does require an air supply for cooling/dust purge. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “traciejim_w” and is located in this country: US. This item can be shipped to United States.

• Brand: RPM
• Control: CNC
• Model: Em25-5000

Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Protected by one or more US patents. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in this country: US. This item can be shipped to United States.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill
• Brand: Edge Technology
• UPC: 738435265885

Here is a Nasa Producer 5-axis CNC bridge type machining center. The control is a Fagor 8055MC with firmware for up to 7-axis simultaneous interpolation. It has RS232, ethernet, and linear flash program storage. It has Fagor FXM AC servos. The spindle is a Precise 4082. Max rpm is 40K. The spindle is a HSK-E25. It uses ATC4-E25-16 tool holders with SRP16 collets. The table is 25.6″ X 21.6″. Travels are 30″ table and 20″ bridge. The height under the bridge is 10. It has a 16 position tool changer. The tilting rotary table is a Yuasa. It has a standard Hardinge 2 3/16-10 threaded spindle with a 5C collet holder. It comes with a chiller for the high speed spindle. I have also included a small 240/480 transformer for testing purposes. The Fagor drives require 480v 3-phase and the rest of the machine uses 240v 3-phase. The included transformer isn’t large enough for full drive power. The footprint of the machine is 6 ft x 6 ft including the pendant. It fits under an 8 ft ceiling and will go through a 7 ft garage door with the Z axis motor removed. It weighs 6000 lbs. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “9warren9″ and is located in this country: US. This item can be shipped to United States.

• Machine Type: Machining Center
• Function: Milling
• Control: CNC

Milling Machine Accessory – Right Angle Attachment R8 fits Bridgeport. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078″) WHAT YOU’LL RECEIVE Right angle attachment, R8 stub arbor, Drawbar extension socket, 7/16-20 bolt with 1/2″ hex head Wooden box. If You have any questions regarding this item, please let us know we’ll be happy to help. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in this country: US. This item can be shipped worldwide.

• Brand: GemPower
• MPN: G102-R8
• Model: G102-R8
• Country/Region of Manufacture: Taiwan

CINCINNATI #2 VERTICAL MILL. We have a crane to load on flatbed. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “nooch_extreme” and is located in this country: US. This item can be shipped to United States.

• Brand: CINCINNATI
• Function: Milling
• Machine Type: Vertical Milling Machine
• Model: cincinatti #2

Motherboard with 32 Bits MCU. Input Format: NC, BMP, JPG, PNG, DXF, etc. X: 400MM x Y: 400MM. Image size: No Limit (The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it’s about 0.81um pixel precision). The gantry structure does not need to be assembled. The others are all parts and need to be assembled by yourself. We provide instructions and video tutorials. Motherboard with 32Bits MCU? It could preprocess 32 instructions, support baud rate as high as 921600,, more powerful! The Most Advanced 32Bits Laser Engraver Firmware? GRBL 1.1 laser master firmware, smarter, faster, higher precision and easier to use. Laser power range could be S0 – S1000? Laser Master could control laser beam more accurately, could even use the high power laser unit to “draw” a picture on paper, that the 8bits high power laser engravers could not do. Engraving speed could be as high as 3000MM/Min? If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S. Optical power output:9.5W11W. Beam shape:Dot (Fixed Focus). Operating voltage:DC 12V. Focus:0.080.08. Input interface:XH2.54-3Pin (+, -, PWM/TTL). TTL output power:> 1K HZ output power = continuous power x 40%. Laser class:Class IV. Safe temperature range:15? Life time:1500020000 hours. Anti-static: Up to 25kV static electricity can be eliminated. Shell: Frosted material, good heat dissipation. Magnetic blower protective shell:Constitutes an air duct, has good heat dissipation, and protects eyes and lasers. Optical power output:5.5W6W. Supports Windows, Mac OS, and Linux. It’s the most popular paid carving software in the world, very easy to use. LaserGRBL for engraving and cutting. LaserGRBL(free software) supports Windows XP, 7, 8, 10. Is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. And then connect to the engraver via laser. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lunyee” and is located in this country: CN. This item can be shipped worldwide.

• color: 40W
• Function: Drilling
• Control: CNC
• Brand: LUNYEE
• Custom Bundle: No
• Modified Item: No
• Country/Region of Manufacture: China

Very nice AMC L-2500 Line Bore machine with 4 bars 2sets of parallels + tooling everything you need to go to work still in use today. Have 2 Line Bores, With current work load only need one. Traditional gear box, not the lower cost, lower torque variable speed version. Additional components not shown or removed from machine are available and come with the machine. Photos were taken while rearranging the shop. WE WILL LOAD ON YOUR TRUCK OR TRAILER FOR FREE. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “icsmachine” and is located in this country: US. This item can be shipped to United States.

• Brand: AMC
• Model: AMC L2500
• MPN: L-2500

Atlas MF Milling Machine Spindle Belt Guard Cover Part no. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “banned_in_nj” and is located in this country: US. This item can be shipped to United States.

• Brand: Atlas
• Function: Milling
• Machine Type: Milling Machine
• Model: M1-401